Ampai DY601N Kit Smart Plug User Manual
- June 14, 2024
- AMPAI
Table of Contents
Ampai DY601N Kit Smart Plug
Smart Plug
Product Description
Solid Blue Plug power on
Fast blue flashing light Reset to factory In paring mode
Connect Homekit
Option 1: Tap to connect via NFC
Step 1: Unlock your iPhone and tap NFC tag area of the plug.
Step 2: A “new device” tab will show up. Click “add” and follow
instructions to setup your device.
Note: 1. Please make sure NFC is enabled on your iPhone. You can check it
by “Settings-> General-> NFC”.
2. If the “new device” tab is not shown when you tap the device, please
lock and unlock your iPhone and try again.
- Tap to Connect” is an iOS function, for Android user, please install the “Aimore” app.
- The NFC sensor is supported on the iPhone 7 or above. Please confirm NFC sensor location if you have trouble with this function.
Option 2: Scan to connect via QR
Step 1: Open the iOS camera and scan the HomeKit setup QR code on the
device.
Step 2: When the setup prompt appears, tap “Continue” to add the device
to your Home app.
If you’re unable to set up the device using the Home app, try the following:
- Ensure that your iOS device is connected to a 2.4GHz WiFi network.
- Forget all other WiFi networks on your iOS device and connect again.
- Press and hold the switch for 5 seconds until the light flashes to reset the smart device, and then try again.
NOTE:
To control your HomeKit accessories while away from home, share control with others, and automate your accessories, you need to set up your HomePod, HomePod mini, Apple TV, or iPad as a home hub.
Please complete the HomeKit connection within 10 minutes. If the time limit is exceeded, you will need to reset the device.
Reset:
- Press and hold the plug for 5 seconds until the light flashes.
- The device will be restored to its factory settings.
Connect Amazon Alexa or Google Assistant
Step 1: Download and Install the “Aimore” App.
- Search for “Aimore” in the Apple App Store or Google Play.
- Alternatively, scan the QR code below to download and install the app.
|
---|---
NOTE: To add the plug to the Aimore app, make sure that your phone’s
Bluetooth function is turned on. The free Aimore app is compatible with iOS
10.0 and above, and Android 5.0 and above.
Step 2: Connect to Alexa and Google Home
- Open the “Me” interface in the Aimore app.
- Select “Third-Party Voice Services” to access the detailed instructions.
|
---|---
|
Note: Scan the corresponding QR code to get the connection tutorial.
*If you don’t want to use HomeKit, Alexa, or Google, you can use the “Aimore” app to control this device. Just download the app by scanning the QR code on the previous page.
Specifications
| Type | Wi- Fi Smart Plug |
|---|---|
| Model | DY601N |
| Rated Current | 10A (Max) |
| luput Voltage | AC 120V |
| AC Frequency | 50-60Hz |
| Load Power | 1200W (Max) |
| Wireless Standard | IEEE802.11 b/g/n |
| Wireless Frequency | 2.4GHZ |
Customer Support
Follow us on WhatsApp for the latest updates!
NEED HELP?
Resources & Support
Facebook: ampaismarthome
Youtube: ampaismarthome
support@aimore.com
www.aimore.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>