Wit WT61 Inclinometer Acceleration Sensor User Manual
- June 14, 2024
- WiT
Table of Contents
Wit WT61 Inclinometer Acceleration Sensor
Tutorial Link
Link to instructions DEMO:
WITMOTION Youtube Channel
WT61
Playlist
If you have technical problems or cannot find the information that you need in the provided documents, please contact our support team. Our engineering team is committed to providing the required support necessary to ensure that you are successful with the operation of our AHRS sensors.
Contact
Technical Support Contact Info
Application
- AGV Truck
- Platform Stability
- Auto Safety System
- 3D Virtual Reality
- Industrial Control
- Robot
- Car Navigation
- UAV
- Truck-mounted Satellite Antenna Equipment
Introduction
The WT61 is a multi-sensor device detecting acceleration, angular velocity and angle . The small outline makes it perfectly suitable for industrial retrofit applications such as condition monitoring and predictive maintenance. Configuring the device enables the customer to address a broad variety of use cases by interpreting the sensor data by smart algorithms.
WT61’s scientific name is AHRS IMU sensor. A sensor measures 3-axis angle, angular velocity, acceleration. Its strength lies in the algorithm which can calculate three-axis angle accurately.
WT61 is an ISO standard accelerometer. It is employed where the highest measurement accuracy is required. WT61 offers several advantages over competing sensor:
- Heated for best data availability: new WITMOTION patented zero-bias automatic detection calibration algorithm outperforms traditional accelerometer sensor
- High precision Roll Pitch Yaw (X Y Z axis) Acceleration + Angular Velocity + Angle
- Low cost of ownership: remote diagnostics and lifetime technical support by WITMOTION service team
- Developed tutorial: providing manual, datasheet, Demo video, free software for Windows computer, APP for Android smartphones , and sample code for MCU integration including 51 serial, STM32, Arduino, Matlab, Raspberry Pi, communication protocol for project development
- WITMOTION sensors have been praised by thousands of engineers as a recommended attitude measurement solution
Warning Statement
-
Putting more than 5 Volt across the sensor wiring of the main power supply can lead to permanent damage to the sensor.
-
VCC cannot connect with GND directly, otherwise it
will lead to the burning of the circuit board. -
For proper instrument grounding: use WITMOTION with its original factory-made cable or accessories.
-
For secondary developing project or integration: use WITMOTION with its compiled sample code.
Use Instructions
Hit the hyperlink direct to the document or download center:
- Software and driver download
- Quick-guide Manual
- Teaching Video
- Common Software with detailed instructions
- SDK(sample code)
- SDK Tutorial Documentation
- Communication Protocol
Use Instructions with PC
Step 1. Connect the sensor with a serial converter
PIN Connection:
VCC – 5V
TX – RX
RX – TX
GND – GND
(When connecting with computer, VCC-5V is recommended.)
MCU Connection
Customer Support
WT61 | manual V23-0630 | www.wit-motion.com | support@wit-motion.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>