WiT WT61C Inclinometer Sensor User Manual

: June 15, 2024
: WiT

Table of Contents

Tutorial Link
Contact
Application
Introduction
Use Instructions
Software Introduction
MCU Connection
Documents / Resources

USER MANUAL WT61C
Inclinometer Sensor

Tutorial Link

Google Drive
Link to instructions DEMO:
WITMOTION Youtube Channel
WT61C Playlist
If you have technical problems or cannot find the information that you need in the provided documents, please contact our support team. Our engineering team is committed to providing the required support necessary to ensure that you are successful with the operation of our AHRS sensors.

Contact

Technical Support Contact Info support@wit-motion.com

Application

AGV Truck
Platform Stability
Auto Safety System
3D Virtual Reality
Industrial Control
Robot
Car Navigation
UAV
Truck-mounted Satellite Antenna Equipment

Introduction

The WT61C is a multi-sensor device detecting acceleration, angular velocity and angle . The small outline makes it perfectly suitable for industrial retrofit applications such as condition monitoring and predictive maintenance. Configuring the device enables the customer to address a broad variety of use cases by interpreting the sensor data by smart algorithms.
WT61C’s scientific name is AHRS IMU sensor. A sensor measures 3-axis angle, angular velocity, acceleration. Its strength lies in the algorithm which can calculate three-axis angle accurately.
WT61C is employed where the highest measurement accuracy is required.
It offers several advantages over competing sensor:

Heated for best data availability: new WITMOTION patented zero-bias automatic detection calibration algorithm outperforms traditional accelerometer sensor
High precision Roll Pitch Yaw (X Y Z axis) Acceleration + Angular Velocity + Angle
Low cost of ownership: remote diagnostics and lifetime technical support by WITMOTION service team
Developed tutorial: providing manual, datasheet, Demo video, free software for Windows computer, APP for Android smartphones , and sample code for MCU integration including 51 serial, STM32, Arduino, Matlab, Raspberry Pi, communication protocol for project developmen
WITMOTION sensors have been praised by thousands of engineers as a recommended attitude measurement solution

1.1 Warning Statement

Putting more than 5 Volt across the sensor wiring of the main power supply can lead to permanent damage to the sensor.
VCC cannot connect with GND directly, otherwise it will lead to the burning of the circuit board.
For proper instrument grounding: use WITMOTION with its original factory-made cable or accessories.
For secondary developing project or integration: use WITMOTION with its compiled sample code.

Use Instructions

Hit the hyperlink direct to the document or download center:

Software and driver download
Quick-guide Manual
Teaching Video
Common Software with detailed instructions
SDK(sample code)
SDK Tutorial Documentation
Communication Protocol

Software Introduction

Software function introduction
(Ps. You can check the functions of the software menu from the link.)

MCU Connection

Step 1. Connect the sensor with a serial converter
PIN Connection:
VCC – 5V
TX – RX
RX – TX
GND – GND
(When connecting with computer, VCC-5V is recommended.)

WT61C TTL
manual v23-0705
www.wit-motion.com
support@wit-motion.com