Tenda U3 300Mbps Mini Wireless 11N USB Adapter Installation Guide

Tenda U3 300Mbps Mini Wireless 11N USB Adapter Installation Guide

Packing List

• Wireless USB adapter *1
• CD *1
• Installation Guide *1

If any item is missing or damaged, please keep the original package and contact the local reseller or distributor immediately. For more product or function details, please visit www.tendacn.com.

Install the Wireless USB Adapter

Connect the wireless USB adapter to a USB port on your computer.

Note:

• The wireless USB adapter is compatible with Windows XP/7/8/8.1/10, Linux, and Mac OSs.
• After connecting the wireless USB adapter to a computer that runs Windows 10, you can click in the lower-right corner of the desktop and select a WiFi network to directly connect the computer to the network without installing the program in the CD-ROM.

Install the Tenda Wireless Adapter Program

For Windows

1. Step 1: Insert the CD into the CD-ROM drive.

Note
If your computer has no CD-ROM drive, download the driver from www.tendacn.com.

2. Step 2: Install the program.
   Access the CD, double-click Setup.exe, and click Install Now.
   
   Wait for the installation to complete. After the installation is complete, the program runs automatically.

For Mac

1. Step 1: Download the driver from www.tendacn.com.
2. Step 2: Double-click Install.pkg, and follow the wizard to complete the installation.
   

Join a WiFi Network

For Windows

1. Step 1: Select the WiFi network to be connected, such as Tenda_01.
   

2. Step 2: If the WiFi network requires a password, enter the password and click Connect.
   If appears to the left of the WiFi network name, connection is successful.
   

For Mac

Click in the upper-right corner of the desktop.
Select the WiFi network to be connected. If the WiFi network requires a password, enter the password and click Join.

If in the upper-right corner of the desktop changes to , connection is successful.

Appendix: SoftAP Mode (Available for Windows XP/7/8/8.1)

After being connected to a computer that can access the Internet, the wireless USB adapter can function as a soft AP to enable nearby wireless clients to access the Internet.

Steps for Using the SoftAP Mode:

1. Click SoftAP in the lower-right corner of the screen to access the configuration page, click Switch, and wait until the SoftAP mode is enabled.
2. Enter the displayed WiFi name and password on your wireless client to connect the client to the wireless USB adapter.
   

Note
To modify the WiFi name or WiFi password, click Modify, enter the new WiFi name or password, and click Save.

Safety and Emission Statement

CE Mark Warning
This is a Class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.

NOTE:

1. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment.
2. To avoid unnecessary radiation interference, it is recommended to use a shielded R145 cable.

Declaration of Conformity
Hereby, SHENZHEN TENDA TECHNOLOGY CO., LTD. declares that the radio equipment type U3 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://www.tendacn.com/en/service/download-cata-101.html
Operate Frequency: 2.4G: EU/2400-2483.5MHz (CH1-CH13) EIRP
Power (Max.): 12.9dBm
Software Version: V0.12.2.3

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Radiation Exposure Statement
This device complies with FCC radiation exposure limits set forth for an uncontrolled environment and it also complies with Part 15 of the FCC RF Rules.

Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. NOTE: (1) The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. (2) To avoid unnecessary radiation interference, it is recommended to use a shielded RJ45 cable.

RECYCLING
This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment. User has the choice to give his product to a competent recycling organization or to the retailer when he buys new electrical or electronic equipment.

| BE| BG| CZ| DK| DE| EE| IE| EL| ES| FR
---|---|---|---|---|---|---|---|---|---|---
HR| IT| CY| LV| LT| LU| HU| MT| NL| AT
PL| PT| RO| SI| SK| Fl| SE| UK|  |

Operating temperature: -10°~ 40°C
Operating humidity: 10%~90%RH, non-condensing

Technical Support

Shenzhen Tenda Technology Co., Ltd.
6-8 Floor, Tower E3, NO.1001, Zhongshanyuan Road, Nanshan District Shenzhen, China. 518052
Global Hotline: (86) 755-27657180
United States Hotline: 1-800-570-5892
Hong Kong Hotline: 00852-81931998
Canada Hotline: 1-888-998-8966
E-mail: support@tenda.com.cn
Skype: Tendasz
Website: http://www.tendacn.com

Tenda technology GmbH
Neumann-reichardt-Str. 27-33, Haus 12, 22041, Hamburg
Technical Support: support@tenda.com.cn
Telephone: +49(40)657262810
Email: sales@tenda.com.cn
Website: http://www.tendacn.com
Skype: tendasz
YouTube: Tendasz1999

Copyright
© 2017 Shenzhen Tenda Technology Co., Ltd. All rights reserved.
Tenda is a registered trademark legally held by Shenzhen Tenda Technology Co., Ltd. Other brand and product names mentioned herein are trademarks or registered trademarks of their respective holders. Specifications are subject to change without notice.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>