PRiMY PR-988ZK Gaming Chair Ergonomic Office Chair Instruction Manual

PRiMY PR-988ZK Gaming Chair Ergonomic Office Chair

Accessories List

(A) Headrest

| (B) Backrest
| (C) Seat Cushion
| (D) 2 Armrests

---|---|---|---

(E) Gas Lift

|

(F) Central Base Tube

|

G) Split Base Tube

|

(H) 5 Casters

(I) Base Plate

|

Plate (J) Keel

|

(K) Decorative **Cover

**

|

(L) 5 Screws
(M6X20mm)

(M) 6 Screws
(M6X30mm)
|

(N) 3 Screws
(M8X35mm)

| (0) 4 Screws
(M6X20mm)
|

(P) 4 Screws
(M6X18mm )

(Q) Wrench
| | |

Notice [If any question, contactprimy-service@outlook.com / Primy-Spt@outlook.com]

• Do not stand in this chair or use the chair as a step ladder uses it as chair only. This chair is designed for one person to use at a time.
• This chair is designed for one person weighing up to 3001bs(136kg).
• Do not use this chair unless all bolts, screws and knobs are firmly secured.
• Check all bolts, screws and knobs every 90days. If the screws are loose, tighten them with a wrench.
• Failure to follow these instructions may result in serious injury of yourself and people around you.
• Some of the part are heavy and has shaped edge, please install it carefully to avoid hurting you and people around you.

Instructions for Use

1. Adjustable height of Backrest
   *Just lift it lightly and slowly then stop when you hear a prompt sounds. One prompt sound means to adjust one level.
   

2. Up and Down adjustment
   

3. Tilt function
   
   

4. Armrests 3D adjustment
   
   

Thanks for purchasing our products. Please read this manual before assembly.
And please assemble in order. After the assembly, keep the instruction properly. Make sure all the parts are included (17 kinds in total).

Assembly Instruction

Please assemble in a wide and flat place.

1. Take out Split Base Tube (G) and Central Base Tube (F). Insert Split Base Tube (G) into Central Base Tube (F) as shown. You can see in the Split Base Tube (G) and Central Base Tube (F) each have a screw hole, align them and tighten the 5 Screws M6X20mm (L) with Wrench (Q) to fix 5 Split Base Tubes (G) to Central Base Tube (F).
   

2. Take out 5 Casters (H), firmly insert them vertically into the hole of the Split Base Tube (G) as shown.
   

3. Take out Gas Lift (E), insert it into the hole of Central Base Tube (F) as shown. Put it aside and we’ll use it in Step 8.
   

4. Then fix the bottom of Armrests (D) to the back of Seat Cushion (C). Tighten the 6 Screws (M6X30mm) (M) with Wrench (Q) firmly.
   * Caution: There is a FRONT sticker on the Seat Cushion (C).
   The right armrest is engraved with the R logo, and the L logo is the left armrest, please install the armrest correctly.
   

5. Connect the seat cushion (C) to the Base Plate (I) with 4 Screws (M6X18mm) (P).
   

6. Next, take the Wrench (Q), assemble the Headrest (A) with the Backrest (B) with the one Screw (M6X20mm) (0). Then assemble the Backrest (B) and Keel (J) with 3 Screws (M6X20mm) (0), then cover the screws with the Decorative Cover (K).
   

7. After step 6, connect the Base Plate (I) assembled in step 5 with 3 Screws (M8X35mm) (N) to the Keel (J) assembled in step 6 together as shown in the picture.
   

8. Finally, take a closer look at the holes in the Base Plate (I), lift firmly the upper part of the chair that you just assembled. And align the holes in the Base Plate (I) with the Gas Lift (E) assembled in step 3.
   

Activate Your Warranty Now!

Primy guarantees you a pleasant buying experience. Please scan the QR code to activate your warranty so that you can enjoy priority and better after-sales service.

Scan the QR code to watch the installation video.

installation viGleo

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>