Yoocaa YO-SPD12-001 12 Pods Hydroponics Growing System User Manual

Yoocaa YO-SPD12-001 12 Pods Hydroponics Growing System

IMPORTANT INFORAMTION

Indoor LED Hydroponic Growing System with 2 LED warm light mode, let the plants grow in the water and nutrient all around the year in home, kitchen, even room, No soil, No metal, No mess, enjoying always fresh fruits, vegetables, even flowers.

A Key Precautions

1. Connect the provided adaptor to the municipal power supply, ensure any operation by any child under the age of 6 should be performed under the company of an adult.
2. After adding water, please make sure you have dried your hands before connecting the adapter to the municipal power supply.
3. The operation of the machine requires that there 3.5L water and 24VDC in the product; to prevent any damage to the machine, make sure no electric part is directly exposed to water. If any water is spilled or scattered over any electric part, thoroughly dry all cables and any electricity-related parts.

Key Prompts

1. You will hear a long “beep” when the power is on. It indicates the completion of electrification and self-inspection, suggesting it is ready to work.

2. After the machine runs normally for several days, the water level in the tank will decrease. When the water is no longer sufficient for the plants to grow, the floating rod will drop to a low location.
   At this time, please fill a proper amount of water and nutrient solution into the water tank (Add 5ml A and 5ml B nutrient solution for each IL water) Normally, ifs suggested to add 3L water, 15ml A and 15ml B nutrient solution each time. Once the water is sufficient, the floating rod will go up to a high location.

3. Please clean the water pump at least once a month.

4. Don’t change the light mode frequently.
   Please using the correct light mode as stated in the user guide.

5. The max height of the lamp tube is 19.4 inches, so when you choose seeds, you need to find some suitable seeds to plant.

6. Please make sure there is enough water in the tank before connected to power.

Included in Package

Notice: Please choose the right seeds which can totally growing under the rod height (20 inches)

1. Plug Adapter

2. Sponges x 24

3. Basket Kit x 12

4. A Solid Nutrient

5. B Solid Nutrient

6. Water Tank Cover x 6

7. Plastic Cover x 12
   

8. Identification Card x 12

9. Rod x 12

Specifications

Input: 110V-240V
Output: 24V DC
Max Power: 24/30W
Water Tank Capacity: 3.5L
Number of Plants: 12

Product Weight: 1450g/3.16Ibs

Dimensions: 15.T1LT1W3.311H

Installation Instructions

1. Take the machine out of the box. As shown in the following figure, pull up the extendable rod as shown on the left image (Note: Lift the extendable rod with one hand while holding the water tank down with the other hand to prevent lifting the whole unit),

2. Remove the water tank cover and take the accessories out of the tank: power adapter, planting package, two bottles of nutrients.
   

3. Before add water to the tank, please connect the power adaptor to DC jack first.
   

4. Add water and plant food to tank, then reinstall the LED part to tank, install the cover of water level to space.
   

Planting Instructions

1. Proportioning and preparing method of nutrient solution Fulfill the bottle containing A and B solid nutrient particles with purified water, and shake bottles to fully mix the content.
   
   Use the cap of the bottle containing nutrient particles as a measure, and add 5ml A and 5ml B nutrient solution into each 1L water (Normally, it’s suggested to add 3L water, 15ml A and 15ml B nutrient solution each time); Make sure the water is stirred uniformly after the addition of each solution.
   Precautions
   1. Nutrient particles have storage life of 2 years in unopened bottles if stored at the ambient temperature without exposure to sunlight.
   2. Well-mixed nutrient solution prepared by adding water have storage life of 5 months if stored without exposure to sunlight.
   
   Max: 15ml

Max: 15ml

2. Add water
   Remove the rubber plug from the filling nozzle, and pour the well-mixed solution into the water tank. Do not go over the “Max” indication.
   For best results, keep the water level at or near the fill line at all time, especially plants that have grown up consume water and nutrients faster.
   

3. Insert seeds in the basket container.
   Sow seeds (4-5 seeds, depending on the types of seeds) into the planting carrier in the basket container
   (to ensure normal sprouting, it is recommended to soak the seeds in warm water for about 1 hour before sowing them into the carrier); then move the baskets into the planting holes on the water tank.
   

Functional Description

Connect this machine to power grid, this indictor LED will flash, that means stand by of machine, press this button and the machine will be turned on after a “beep” and run on the “veg mode”; In the meanwhile, the LED on the top will run on a 16h-on-and – Sh-off-cycle, the water pump will run for 30 mins and shut off 30 mins, the cycle will repeat daily until deactivation. The indicator light will turn on of power, veg, pump.
In the meanwhile, the LED on the top will run on a 16h-on-an- Sh-off-cycle, the water pump will run for 30 mins and shut off 30 mins, the cycle will repeat daily until deactivation. The indicator light will turn on of power, veg, pump. Suitable for leafy vegetables and foliage plants.
Press this button and the machine will run on the “flower mode” after a “beep”; In the meanwhile, the LED on the top will run on a 16h-on-and- Sh-off- cycle, the water pump will run for 30 mins and shut off 30 mins, the cycle will repeat daily until deactivation. The indicator light will turn on of power, flower, pump. Suitable for flowers and fruit plants like tomatoes, pepper etc.
Press this button will shift the pump mode between 24h and 12h, in 24h mode, the indicator LED will turn light still, the pump will turn on 30 mins and off 30 mins, the cycle will repeat daily until deactivation and in 12h mode, the indicator LED will flash , the pump will turn on 30mins and off 30mins, the cycle will repeat for 12h and the other 12h will turn off automatically.

The process of how to plant the Basil, Mint, Tomato, Pepper, Dill, Parsley, Coriander, Rosemary

| Light Mode| LED Light Distance from Plants| Temperature| Nutrient Solution
Germination stage| Any| ?inches| 59 °F- 86 °F| 3L water+15ml A and 15 ml B nutrient solution
Leafy Vegetables| Veg Mode| More than 7 in at growth stage
Flowers and Fruit Paints| Flower Mode| Any distance at ornamental stage

Note:

1. Please clean the water pump at least once a month.
   (Take down the cover of the water pump, then take down the cotton, wash it, and then install those back.)

2. When the water floating rod goes down, it means that water and nutrient solution need to be added. 3. Some seeds germinate in less than 24 hours. Some take 24 days or more. Most labels give an estimate of how long your seeds will take to germinate but many factors impact germination.

3. Always keep your grow lights as close to your plants as possible.

4. Typically, your plants will need nutrients every 2 weeks. Add 5ml A and 5ml B nutrient solution for each 1L water. More isn’t better, too much nutrient can hurt your plants.

5. Because most people don’t have bees in their home, you will need to start pollinating our fruiting plants (tomatoes, peppers, etc.) once they begin to flower approximately 4 – 6 weeks after planting). To pollinate, use one or more of the following methods:
   a. Place an open hand inside plant branches and gently move your hand back and forth to shake the plant and spread the pollen.
   b. Place a fan near your plants and the moving air will pollinate your plants

6. Harvest often to maintain a healthy garden, but never take more than 1/3 of each individual plant at a time.

Warranty (1-Year Period)

The manufacturer’s warranty is void under the following circumstances but not limited to:

1. Improper or inadequate maintenance or modification.
2. The use of unspecified adapter and accessories.
3. Loss or damage in transit.
4. Damages that occurs as a result of one’s failure to follow the instructions.
5. This warranty does not apply to expendable or consumable parts and does not extend to any product from which the serial number has been removed.

Customer Service

1. Yoocaa product comes with 12 months warranty. Contact us via yoocaa-cs@hotmail.com to register information to start your warranty service.
2. We take care of all quality-related issues with replacement or refund.
3. If you have any problems about the product, please don1t hesitate to contact us for help.
    yoocaa-cs@hotmail.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>