HARPER HCLK-1007 Radio Alarm Clock User Manual

User Manual
Radio Alarm Clock
HCLK-1006, HCLK-1007

Thank you for choosing Harper products. Before use, read the operating instructions and save them in case you have any questions about servicing the device.

PRECAUTIONARY MEASURES AND STORAGE

This sign warns the user about the presence of important maintenance (repair) and operation instructions in the documentation that is attached to this device.
This sign warns the user about the presence of uninsulated parts in the device body that is under-voltage and can lead to electric shock.

1. Caution: To avoid the risk of electric shock, do not remove the cover (or back panel). Do not carry out repairs yourself, this may lead to malfunctions in the operation. In case of problems, contact an authorized service center.
2. To avoid electric shock, do not connect the plug to extension cords or other connectors if the contact pins do not fit completely into the holes.
3. Protect the device from moisture, do not touch it with wet hands. Otherwise, it may cause electric shock or fire.
4. The device is designed for use in normal climatic conditions. Extreme climatic conditions (temperatures below 0°C or above 45°C, extremely high humidity) can cause problems and damage the electronic components of the device.
5. Do not leave the device and accessories unattended. Keep them out of the reach of children and pets. Small parts of the device can cause suffocation.
   The equipment is designed to work in residential and commercial areas, public places, and industrial areas with small and medium power consumption, without exposure to harmful and dangerous production factors.
   The equipment is intended for operation without the constant presence of maintenance personnel.

REQUIREMENTS TO TRANSPORTATION
Transportation of equipment should be carried out in the original packaging in covered vehicles by any means of transport.
PURPOSE
This radio alarm is designed to wake up the user, listen to radio stations and display the time.
DESCRIPTION OF THE LED DISPLAY

1. LED DISPLAY
   Display the Clock and the radio frequency.

2. AL1-B INDICATOR
   This indicator shows that the unit is in ALARM 1 buzzer mode.

3. AL1-R INDICATOR
   This indicator shows that the unit is in ALARM 1 radio mode.

4. AL2-B INDICATOR
   This indicator shows that the unit is in ALARM 2 buzzer mode.

5. AL2-R INDICATOR
   This indicator shows that the unit is in ALARM 2 radio mode.

6. SOURCE/AL.OFF BUTTON
   Use this button to turn on the radio and select AM or FM band.
   Use this button to turn the ALARM off after the Alarm activates.

7. MEM/M+/TIME BUTTON
   Use this button to set the clock
   Use this button to store radio stations in the memory.
   Use this button to select the stored radio stations in the memory.

8. VOL−/AL2 BUTTON
   Use this button to decrease the volume.
   Use this button to set the alarm time in ALARM 2.

9. VOL+/AL1 BUTTON
   Use this button to increase the volume.
   Use this button to set the alarm time in ALARM 1

10. SLEEP/SNOOZE BUTTON
    Use this button to temporarily suspend the ALARM for a short period.
    Use this button to set the sleep time.

11. DIMMER BUTTON
    • Use this button to select the brightness of the display.

12. TUN−/MIN BUTTON
    Use this button to search the radio station in the backward direction.
    Use this button to adjust the minute in CLOCK or ALARM time.

13. TUN+/HR BUTTON
    Use this button to search the radio station in the forwarding direction.
    Use this button to adjust the hour in CLOCK or ALARM time.

14. BATTERY COMPARTMENT
    Compartment for the backup battery

15. SPEAKER
    Sound Output

16. DC JACK
    Connect the unit to the AC/DC adaptor.

17. FM WIRE ANTENNA
    Extend this wire antenna to obtain better FM broadcasting.
    Connect the unit to the AC/DC adaptor.

CONNECTING THE UNIT TO THE POWER
Plug one end of the AC adaptor into the DC power Input, and then plug the other end into the AC wall outlet. Before switching on the unit, make sure that the voltage of your electricity supply is the same as that indicated on the rating plate.
BATTERY BACKUP
Insert two pieces of UM-4 batteries into the battery compartment. Be sure to observe the proper polarity (the «+» and «−» signs) as indicated inside the battery compartment.
In case of power failure or interrupted AC power, the current time, and alarm time settings, the stored radio stations are preserved in the memory of the unit by means of a battery backup function.

SETTING THE CLOCK

1. With the unit in CLOCK mode, press and hold the MEM/M+/TIME button for about 1 second, and the time will begin to flash on the LED display.
2. Press the TUN+/HR button to adjust the hour.
3. Press the TUN−/MIN button to adjust the minute.
4. When the correct time is selected, press the MEM/M+/TIME button again to confirm.

SETTING THE ALARMS

1. With the unit in CLOCK mode, press the VOL+/AL1 or VOL−/AL2 button. The ALARM time will begin to flash on the LED display.
2. Press the TUN+/HR button to adjust the alarm hour.
3. Press the TUN−/MIN button to adjust the alarm minute.
4. When the correct time is selected, press the VOL+/AL1 or VOL−/AL2 button to confirm.
5. Press the VOL+/AL1 or VOL−/AL2 to select the ALARM sound mode – buzzer or currently set radio station. The corresponding alarm buzzer or radio indicator will light up.

C ANCEL THE ALARM
In clock mode, press VOL+/AL1 or VOL−/AL2 (3 times) until the alarm indicator goes off.

SNOOZE FUNCTION

1. Whenever the alarm (radio or buzzer) activates, it can be temporarily suspended for a short period of 9 minutes by pressing the SNOOZE/ SLEEP button once.
2. The buzzer or radio will then automatically activate again after the 9 minutes SNOOZE period has ended.
3. This procedure can be repeated for up to approximately one hour.

TURN OFF THE ALARM
When the Alarm activates, press the SOURCE/AL. OFF button to turn off the Alarm.

LISTENING TO THE AM/FM RADIO

1. Press the SOURCE/AL. OFF button to turn on the radio and select AM or FM band
2. Press the TUN+/HR or TUN−/MIN button step by step to tune to the desired radio stations.
3. Press and hold the TUN+/HR or TUN−/MIN buttons for approx. 1 second, it will start to search the next radio station in the direction of the search. The search operation simply finds stations with strong signals. Stations with weak reception can only be tuned in manually.

SAVING A RADIO STATION TO THE MEMORY

1. Tune the radio to the desired station.
2. Press and hold the MEM/M+/TIME button for approx. 1 second, the display will show ‘PXX’ blinking, where XX is the memory station number.
3. Press the TUN+/HR or TUN−/MIN button to select the desired memory station number, then press the MEM/ M+/TIME button again to store this radio station in the memory.
4. Up to 10 AM and 10 FM radio stations can be stored in the memory.

TO LISTEN TO A SAVED RADIO STATION

1. Press the SOURCE/AL.OFF button to select AM or FM band.
2. Press the MEM/M+/TIME button to select the stored radio station.

SLEEP TO MUSIC FUNCTION

1. This function allows you to listen to the radio while you fall asleep.
2. Press the SNOOZE/SLEEP button, the display will show the default sleep time of 90 minutes
3. Press the SNOOZE/SLEEP button again to adjust the desired sleep time.
4. The options are 90-80-70-60-5040-30-20-10-min. or OFF
5. Now you can enjoy listening to the radio for the pre-set period of sleep time. 6. After this pre-set time has elapsed, the unit will switch off automatically. TURN OFF THE RADIO Press and hold the SOURCE/AL OFF button for approximately 1 second, and the radio will turn off.

PICKING

• 1 x Alarm clock radio
• 1 x Power supply
• 1 x User manual
• 1 x Warranty card

TECHNICAL SPECIFICATIONS

DISPOSAL INFORMATION

This device is designed and made of high-quality materials and components, which can be recycled and reused. The symbol means that electrical and electronic equipment must be disposed of separately from household waste after use.
Notes
In accordance with constant improvement, specifications and design are subject to change without notice.
This product does not contain precious metals.

Alarm clock radio
HCLK-1006, HCLK-1007

Information about certification
The products passed all the assessment procedures established in the technical regulations of the Customs Union and the Eurasian Economic Union
Information about product certification, certificate number, date, and validity period you can find on the website www.harper.ru or by calling technical support at 8-800-600-7107
The production date is indicated on the gift-box
Life duration of product: 24 months
Warranty period: 12 months
Warranty service is provided on the base of the warranty card that goes together with the product.
The warranty card and User manual are integral parts of the product.
For additional information about the product and authorized service centers, you may find it at www.harper.ru or by telephone at 8-800-600-7107.
Manufacturer: Harper International
Trading Limited 15F, Radio City, 505 Hennessy
Road, Causeway Bay, Hong Kong  Made in China
Importer/claims organization: LLC «Progress-Plyus»,
App.11, floor 2, Build.50, k.1, Udaltsova Str., Moscow, Russia,
119607, tel.: +74951330210, email: info@harper.ru

References

• Harper.ru

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>