GoGEN TWSBUDDY02 Wireless Headphones Instruction Manual

GoGEN TWSBUDDY02 Wireless Headphones

Specifications

• Model: TWS BUDDY 02
• Charging Interface: USB
• LED Indicator: Yes
• Microphone: Yes
• Touch Control: Yes

Product Usage Instructions

Power On & Pairing

1. The headphones automatically turn on when removed from the charging case.
2. During pairing, the white LED on one earpiece lights up, while the other one flashes.
3. Note: The headphones need to be activated before first use.
   Take both headphones out of the charging case, put them back in, and close the lid. The headphones can then be removed from the case and paired with the mobile device.

Bluetooth Connection Steps

1. Keep your headset and mobile phone within 1 meter of each other.
2. Turn on Bluetooth in the settings on your phone or other devices.
3. Find and select the device named “GOGTWSBUDDY02”.
4. If prompted for a code, enter “0000”.
5. Once successfully paired, the LED indicator will turn off.

Touch Control Functions

• Power On/Off: Double tap the panel on the left earpiece.
• Activate Voice Assistant: Double tap the left or right earpiece.
• Play/Pause: Double tap the left or right earpiece.
• Next Track: Triple tap the right earpiece.

ANC Mode

To activate ANC mode, follow these steps:

1. Take out one or both headphones from the charging case.
2. Place both headphones back in the charging case.
3. Double tap the left or right earpiece to activate ANC mode.

Charging

Charging the Headphones

Place the headphones in the charging case. During charging, the LED indicator on the headphones will turn red, and after completion, it will turn white for about 30 seconds.

Charging the Charging Case

Note: Make sure the charging case has enough battery before charging the headphones.

Security Precautions

Please read the user manual carefully and follow these guidelines for a proper and safe use of the headset:

• Avoid exposing the headset to extreme temperatures or humidity.
• Avoid using the headset at high volumes for extended periods, as it may damage your hearing.
• Avoid using sharp objects to operate the touch control area.
• Do not disassemble or modify the headset.

FAQ

Q: How do I activate ANC mode?
To activate ANC mode, take out one or both headphones from the charging case and double tap the left or right earpiece.

Q: How do I pair the headphones with my mobile device?
To pair the headphones with your mobile device, make sure Bluetooth is turned on in the settings, find and select the device named “GOGTWSBUDDY02”. If prompted for a code, enter “0000”.

Q: How do I turn on/off the headphones?
To turn on the headphones, remove them from the charging case.
To turn them off, place them back in the charging case.

SECURITY PRECAUTIONS

In order to have a proper and safe use of the headset, please read this user manual in detail and save it. Be aware of the following guidelines when using your headset:

WARNING

• You should adjust the volume carefully when using the headset to prevent hearing damage.
• Please stop using the headset in potentially hazardous situations to ensure your safety.
• Please avoid using the headset to listen to music, make or receive calls which may cause a distraction while driving.
• Put this product and its accessories somewhere out of the reach of children, to avoid a fatal danger caused by inappropriate use.
• You should keep water from entering the headset, which may cause damage to the sound quality or the headset.
• You should avoid turning the volume so high that you can’t hear anything around you. If you feel a tinnitus or the volume is too high, please reduce the volume.
• Stop using the headset if you feel obvious discomfort, irritation or have other adverse reactions.
• The headset should not be stored or used at temperatures below -10°C or above 40°C which may shorten headset or battery life.

TECHNICAL SPECIFICATIONS

• Bluetooth Version: V 5.2
• Bluetooth Profile: HFP, A2DP, AVRCP
• Audio codecs: SBC, AAC
• Frequency range: 2402 MHz – 2483,5 MHz
• Operating range: 10 m
• Frequency Response: 20 Hz – 20 KHz
• Rated Power: 5 mW
• Sensitivity: 102 dB (±3 dB) @ 1 KHz
• Impedance: 32 Ω ± 15%
• EIRP: 4 dBm
• Battery: Li-Polymer 350 mAh Charging Case + 43 mAh x 2 earbuds
• Music playing time: up to 5 hours + 15 hours with charging case
• N.W.: 4 g / earbud, 37 g including charging case

PACKAGE CONTENTS

Eartips, USB Charge Cable, Charging Case

DEVICE LAYOUT

1. Charging interface
2. LED
3. Touch control area
4. Microphone
5. Charging battery indicator

POWER ON & PAIRING

The headphones automatically turn on when removed from the charging case. During pairing, the white LED on one earpiece lights up, the other one flashes.

Note: The headphones need to be activated before first use. Take both headphones out of the charging case, put them back in, and close the lid. The headphones can then be removed from the case and paired with the mobile device.

BLUETOOTH CONNECTION STEPS

1. Please keep your headset and mobile phone as close as you can, within 1 meter.
2. Turn on “Bluetooth” in setting on your phone or other devices, and then find and select GOGTWSBUDDY02.
3. Click on GOGTWSBUDDY02 and Bluetooth Headset gets connected with your phone or devices automatically. (Some may require pass code which is “0000” (4 zeros)).
4. After a successful pairing of the headphones, no diode lights up.

RESET

In case of failure pairing or unnormal working, you need to RESET the headphones as following:
Place the earphones in the charging case and press the touch surface on the left and right earphones 5 times. A successful restart is signaled by the white diode flashing 5 times on both headphones.

TAP CONTROL INSTRUCTIONS

Assistance
ANSWER/END CALL| Double press the L or R earphone
REJECT CALL| Long press L or R earphone
PLAY & PAUSE MUSIC| Double press L or R earphone
NEXT TRACK| Press 3 times R earphone
LOW-LATENCY MODE

(game mode)

| Long press L earphone. Activation of the mode is signaled by two beeps. Deactivation by three.
ANC MODE| Long press R earphone to switch between ANC modes (see explanation below).

ANC MODE
The headphones feature Active Noise Cancellation (ANC) for undisturbed listening. The above procedure can be used to switch between the 3 modes of this function. A change of mode is signaled by a voice confirmation:

• „ANC OFF“ – active noise cancellation function turned off
• „ANC ON“ – active noise cancellation function on
• „PASS THROUGH“ – (Transparency mode) the headphones filter the ambient noise, but leave the voices of the people around you audible

CHARGING

CHARGING OF HEADSET
Place the headphones in the charging case. The headset indicator light glows red when charging. After fully charged, it lights up white for 30 seconds.

CHARGING OF CHARGING BASE
Connect the USB cable to the charging case. Connect the other end of the USB cable to a computer or charger. The LED indicator on the case flashes white during charging. It glows solid white when fully charged.

WARNING:

• You must select a qualified charger from a regular manufacturer. (Charging Voltage: 5V Charging Current: 400mA for charging case)

• A fully charged headset will lose its power automatically if left unused.
  It is recommended to charge the headset each three months.

• Do not leave the headset in a too hot or too cold condition (best between -10°C and +40°C) which may affect the headset‘s operations although it is fully.

• Please wear this Headset properly for best tone quality.
  Do not disassemble hardware. Please use soft and dry cottons for cleaning.

• Make sure the headset is fully charged before first use.

• This Headset is not waterproof. Do not use it while swimming or diving.

• If do not use this Headset for long time, please charge once a week to extend battery life.

• Keep your Headset and device as close as you can to avoid interference of signal path.

WARRANTY

The warranty does not apply to a decrease in the accumulator’s effective capacity caused by its use or age. Effective capacity gradually decreases depending on the method of use of the accumulator.
We reserve the right to change technical specifications.

TO AVOID DANGER OF SUFFOCATION, KEEP THE PLASTIC BAG AWAY FROM BABIES AND CHILDREN.
DO NOT USE THIS BAG IN CRIBS, BEDS, CARRIAGES OR PLAYPENS. THIS BAG IS NOT A TOY.

Disposal of old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems)

This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. The recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product, please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product.
Hereby, ETA a.s. declares that the radio equipment type TWSBUDDY02 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://www.gogen.cz/declaration_of_conformity

www.GoGEN.cz

References

• Gogen CZ
• GOGEN HU
• GOGEN PL

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>