Oceanic SYSTEM 6010 Ethernet to HDMI Adaptor User Manual

: June 4, 2024
: Oceanic SYSTEM

Table of Contents

Oceanic SYSTEM 6010 Ethernet to HDMI Adaptor
INTRODUCTION
INSTALLATION
OPERATION
MAINTENANCE
TROUBLESHOOTING
TECHNICAL SPECIFICATION
WARRANTY
TECHNICAL SUPPORT
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Oceanic SYSTEM 6010 Ethernet to HDMI Adaptor

INTRODUCTION

The Oceanic Systems 6010 Ethernet to HDMI Adaptor is designed for use with the 5180 Poseidon System Unit and the 5165 Poseidon Max System Unit and allows you to use any HDMI & USB Touchscreen as a remote screen for the Poseidon Software. Offering a simple plug-and-play setup, the 6010 connects to the same ethernet network as the Poseidon System Unit, and is able to auto-configure to any display size and automatically connect to the Poseidon Software.

Product Features

DIN Rail Mounted
Wide input voltage range of 9-32V
Minimal set-up required
Compatible with all Oceanic Systems Display Solutions
No configuration required

INSTALLATION

Unpacking the box
In the box you will find:

6010 Ethernet To HDMI Adaptor
Micro HDMI to HDMI Cable
This Manual

Choosing a mounting location
The 6010 is designed for use with a DIN rail and should be mounted in a dry, cool location a maximum of 10 metres from the display that it is intended to drive. The unit should not be exposed to direct sunlight.

Connecting the 6010 Ethernet To HDMI Adaptor
The 6010 Ethernet to HDMI has 4 connections that need to be made in order to use the unit:

Ethernet Connection The unit should be connected via CAT5 Ethernet cable to the same network as the Poseidon System unit. HDMI Connection Ethernet cableThe unit should be connected to the display using the included Micro HDMI to HDMI Cable. The micro HDMI cable should connect to the 6010 at the port marked HDMI on the front label. The full-size HDMI cable should connect to the display to be driven.

USB Connection
Any USB port on the 6010 can be used to connect the 6010 to the USB connection on the Display. Please refer to your display documentation for information on how to connect it to a USB cable.

Power Connection
The 6010 includes a 1-metre tail for connecting the unit to a 9-32V DC power supply. It is recommended that this power supply is ground referenced the same as the display that it is to be connected to. It is recommended to connect the 6010 to a switchable power supply as the 6010 does not have on/off power control. The 6010 has an internal resettable fuse, so an external fuse is not required.
Once all connections are made, please ensure to securely retain all cables appropriately so that they do not work loose under vibration.

OPERATION

Turning the unit on / off
When the power supply to the 6010 is available, the 6010 will automatically turn on. You do not need to shut the unit down manually before switching the power off.

First use
Please ensure that your router has broadcast enabled and that the Poseidon System has a static IP before proceeding. When turning the 6010 on, you will see a message that the unit is searching for the Poseidon system. This process is automatic. After the Poseidon system has been found, you will be prompted to enter a PIN number. This is the Administrator PIN of the Poseidon System and defaults to 1111.

Enter the pin, and press accept. You will now be asked to name the device and select the screen to connect
Name the device according to the device location, for example, “Aft Display”
Select the page set to display, for new / unconfigured systems this will default to “MAIN”
Press accept

If your router does not support broadcast, the auto-configuration will not work and there is an alternate method to configure the 6010. To manually configure the 6010, create a text document named “IP” (Note, no .txt extension). In this file enter the IP address of the Poseidon System, for example: 192.168.16.200 Then, save this file to a USB memory stick on the root folder (ie. E:/) and insert it into the 6010. The 6010 will now load the Poseidon System Page and you can remove the USB from the 6010.

MAINTENANCE

Regular maintenance is important to ensure the continued proper operation and reliability of the 6010 Ethernet to HDMI Adaptor. Please perform the following tasks periodically:

Clean the unit with a soft, dry cloth. Do NOT use any chemical cleaners or Acetone as these can damage the finished surface. Do not spray any cleaning liquids or water onto the unit.
Ensure that the cable connections are all securely fitted and appropriately retained.
Ensure that the mounting bracket is secure on the DIN rail, and reposition if loose.
Ensure the cables to the display are not chafing any sharp edges and remain secure and un-damaged.

TROUBLESHOOTING

If the unit fails to power on then check:

The power feed to that cable is switched on and the fuse to that circuit is not blown
That the power cable is undamaged. If the unit powers on but does not show anything on the connected display, then check: That the Micro HDMI and HDMI ends of the display cable are both connected correctly and is not damaged If the unit does not respond to the touch screen events, then check: That the USB cable is connected correctly and is not damaged

If the unit is unable to find the Poseidon System ensure:

That the Poseidon System is turned on, and connected to the ethernet network
That the router is turned on and broadcast is enabled
That the ethernet cabling is correct, and all switches on the ethernet network are powered and functioning correctly

If these steps do not solve your problem then contact Oceanic for technical support.

TECHNICAL SPECIFICATION

As Oceanic Systems are constantly improving their products specifications are subject to change without notice. Oceanic System’s products are designed to be accurate and reliable however they should only be used as aids to navigation and not as a replacement for traditional navigation aids and techniques.

Electrical and Mechanical

Parameter	Value	Comment
Operating Voltage	9 to 32 Volts
Power Consumption	X.XA @ 24V	Average Operating
Overall Dimensions	XxYxZ	mm

Certifications

Parameter	Value
EC 60945	Electromagnetic Compliance
FCC	Part 15B Class A
CE	CE MarkedB

WARRANTY

OUR WARRANTY

Oceanic Systems warrants this product to be free from defects in materials and workmanship for one year from the date of original purchase. If within the applicable period any such products shall be proved to Oceanic Systems satisfaction to fail to meet the above-limited warranty, such products shall be repaired or replaced at Oceanic Systems option. Purchaser’s exclusive remedy and Oceanic Systems’ sole obligation hereunder, provided the product is returned pursuant to the return requirements below, shall be limited to the repair or replacement, at Oceanic Systemsoption, of any product not meeting the above-limited warranty and which is returned to Oceanic Systems; or if Oceanic Systems is unable to deliver a replacement that is free from defects in materials or workmanship, Purchaser’s payment for such product will be refunded. OceanicSystems assumes no liability whatsoever for expenses of removing any defective product or part, or for installing the repaired product or part or a replacement therefore or for any loss or damage to equipment in connection with which Oceanic Systems products or parts shall be used. The foregoing warranties shall not apply with respect to products subjected to negligence, misuse, misapplication, accident, damage by circumstances beyond Oceanic Systems’ control, to improper installation, operation, maintenance, or storage, or to other than normal use or service. THE FOREGOING WARRANTIES ARE EXPRESSLY IN LIEU OF AND EXCLUDE ALL OTHER EXPRESS OR IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND OF FITNESS FOR A PARTICULAR PURPOSE.

Statements made by any person, including representatives of Oceanic Systems, which are inconsistent or in conflict with the terms of this Limited Warranty, shall not be binding upon Oceanic Systems unless reduced to writing and approved by an officer of Oceanic Systems. IN NO CASE WILL OCEANIC SYSTEMS BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES, DAMAGES FOR LOSS OF USE, LOSS OF ANTICIPATED PROFITS OR SAVINGS, OR ANY OTHER LOSS INCURRED BECAUSE OF INTERRUPTION OF SERVICE. IN NO EVENT SHALL OCEANIC SYSTEMS AGGREGATE LIABILITY EXCEED THE PURCHASE PRICE OF THE PRODUCT(S) INVOLVED. OCEANIC SYSTEMS SHALL NOT BE SUBJECT TO ANY OTHER OBLIGATIONS OR LIABILITIES, WHETHER ARISING OUT OF BREACH OF CONTRACT OR WARRANTY, TORT (INCLUDING NEGLIGENCE), OR OTHER THEORIES OF LAW WITH RESPECT TO PRODUCTS SOLD OR SERVICES RENDERED BY OCEANIC SYSTEMS, OR ANY UNDERTAKINGS, ACTS OR OMISSIONS RELATING THERETO. Oceanic Systems does not warrant that the functions contained in any software programs or products will meet the purchaser’s requirements or that the operation of the software programs or products will be uninterrupted or error free. Purchaser assumes responsibility for the selection of the software programs or products to achieve the intended results, and for the installation, use and results obtained from said programs or products. No specifications, samples, descriptions,or illustrations provided by Oceanic Systems to Purchaser, whether directly, in trade literature, brochures or other documentation shall be construed as warranties of any kind, and any failure to conform to such specifications, samples, descriptions, or illustrations shall not constitute any breach of Oceanic Systems limited warranty.

WARRANTY RETURN PROCEDURE
To apply for warranty claims, contact Oceanic Systems or one of its dealers to describe the problem and determine the appropriate course of action. If a return is necessary, place the product in its original packaging together with proof of purchase and send to an Authorized Oceanic Systems Service Location. You are responsible for all shipping and insurance charges. Oceanic Systems will return the replaced or repaired product with all shipping and handling prepaid except for requests requiring expedited shipping (i.e. overnight shipments). Failure to follow this warranty return procedure could result in the product’s warranty becoming null and void. Oceanic Systems reserves the right to modify or replace, at its sole discretion, without prior notification, the warranty listed above.