SOUNDPEATS 230104 Run Free Wireless Headphones User Guide
- June 14, 2024
- SoundPEATS
Table of Contents
SOUNDPEATS 230104 Run Free Wireless Headphones
Product Information
Specifications
- Model: SOUNDPEATS RunFree
- IC ID: 27785-YK005
- FCC ID : 2AFTU-DD033
- Made in : China
Manufacturer
- Shenzhen SoundSOUL Information Technology Company Limited
- Room 1308-1309, Building B, Huihai Square, Chuangye Road,
- Longhua District, Shenzhen, China. 518109
- Email: support@soundpeats.com
- Website : www.soundpeats.com
EC Representative
- TANMET INT’L BUSINESS LTD
- 9 Pantygraigwen Road, Pontypridd, Mid Glamorgan, CF37 2RR, UK
- Email: tanmetbiz@outlook.com
Product Usage Instructions
Pairing
- Press and hold the power button for 3 seconds to turn on the RunFree headset. The headset enters pairing mode after a solid white light and then flashes in red and white.
- Activate Bluetooth on the device, and choose SOUNDPEATS RunFree on the Bluetooth List to pair.
Connected
- Press and hold the power button for 3 seconds to turn on the RunFree headset.
- Activate Bluetooth on the device, and choose SOUNDPEATS RunFree on the Bluetooth List to pair.
Reset
- Plug in the headset to have it enter the charging status.
- Press and hold the power button for 3 seconds, and the light flashes in red and white two times. The headset restores to the factory setting.
- Pull out the charging cable and turn on the headset. The reset is complete.
Wearing
- Identify the left and right earpieces.
- Rotate the headset to find the most comfortable fit.
Control
- Power On : Manually press and hold the power button for 3 seconds.
- Power Off : Manually press and hold the power button for 3 seconds. Automatically turns off after 3 minutes of disconnection.
- Play / Pause : Press the power button.
- Volume: Press the volume- button to decrease volume, press the volume+ button to increase volume.
- Previous Track : Press and hold the volume- button.
- Next Track : Press and hold the volume+ button.
- Answer / Hang Up Phone Call : Press the power button.
- Reject Phone Call : Press and hold the power button for 1.5 seconds.
- Switch Between Two Calls : Double press the power button.
- Activate Voice Assistant : Double press the power button.
Frequently Asked Questions (FAQ)
- Q: How do I pair the RunFree headset?
- A: To pair the RunFree headset, press and hold the power button for 3 seconds to turn it on. Then, activate Bluetooth on your device and choose SOUNDPEATS RunFree from the Bluetooth List to pair.
- Q: How do I reset the headset?
- A: To reset the headset, plug it in to enter the charging status. Press and hold the power button for 3 seconds until the light flashes in red and white two times. Then, pull out the charging cable and turn on the headset to complete the reset.
Pairing
- Press and hold the power button for 3 seconds to turn on the RunFree headset. The headset enters pairing mode after a solid white light and then flashes in red and white.
- Activate Bluetooth on the device, and choose “SOUNDPEATS RunFree” on Bluetooth List to pair.
Reset
- Plug in to have the headset enter charging status.
- Press and hold the power button for 3s, and the light flashes in red and white two times. The headset restores to the factory setting.
- Pull out the charging cable and turn on the headset. The reset is complete.
Wearing
- Identify the left and right.
- Rotate the headset to find the most comfortable fit.
Product Diagram
Control
Q&A
- Q1: How to charge the headset?
- Use a Type-C adaptor to charge the headset (current not over 1A).
- Please charge the headset at least once every three months when not in use for a long time.
- Q2: How to disconnect the headset from the phone?
- Press and hold both volume buttons simultaneously for 3s. (Invalid operation to do this while playing music or during a phone call)
- Turn off Bluetooth on the phone.
- Q3: How to connect with two devices at the same time?
- Turn on the headset and connect it to Device A.
- Disconnect from Device A and enter pairing mode.
- Connect the headset to Device B.
- Connect the headset to Device A again.
The RunFree headset will automatically connect with two devices next time after the first time connection.
FCC Statement
- This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o˝ and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions
- This device may not cause harmful interference.
- this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
IC ID
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions
- This device may not cause interference, and
- This device must accept any interference, including interference that may cause undesired operation of the device.
RF warning statement
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
- IC ID : 27785-YK005
- FCC ID : 2AFTU-DD033 MADE IN CHINA
MANUFACTURER
- Shenzhen SoundSOUL Information Technology Company Limited
- Room 1308-1309, Building B, Huihai Square, Chuangye Road, Longhua District, Shenzhen, China. 518109
- support@soundpeats.com
- www.soundpeats.com
- Company： Qing UG(haftungsbeschränkt)
- Address： Undinestr. 7, 12203 Berlin Germany
TANMET INT’L BUSINESS LTD
9 Pantygraigwen Road, Pontypridd, Mid Glamorgan, CF37 2RR,
References
Read User Manual Online (PDF format)
Loading......