Taylor 7084 Electronic Glass Bathroom Scale Instruction Manual
- June 14, 2024
- TAYLOR
Table of Contents
Taylor 7084 Electronic Glass Bathroom Scale
Introduction
Thank you for purchasing a Taylor® Electronic scale. All of our precision instruments for weight measurement are engineered and designed to meet the highest quality standards …to assure you years of uncompromising accuracy and consistently dependable, convenient performance. These instructions contain important and useful information about this unit’s operation. Please read instructions thoroughly to ensure that you have the full benefit of all the unit’s features. Keep these instructions handy for future reference.
Battery Installation
- Use 3 AAA batteries (included. Remove any plastic wrap from the batteries before proceeding). Always replace all batteries at the same time; do not combine old and new batteries. Do not mix Alkaline, carbon-zinc (standard) or Nickel-Cadmium (rechargeable) batteries.
- Remove the battery compartment cover on the bottom of the scale.
- Place the batteries into the battery compartments according to the “+” and “-” polarity symbols at the bottom of the compartment.
- Replace the battery compartment cover.
- Replace all the batteries if “LO“ is displayed and the scale says “Low Battery”, LCD readings grow dim or irregular, or the voice quality distorts or becomes too soft to hear.
NOTE : Please recycle or dispose of batteries per local regulations.
WARNING : Batteries may pose a choking hazard. Do not let children handle batteries.
General Operation
- Install 3 AAA batteries (please see “Battery Installation” section of this manual for battery installation instructions). Also, some models have a static cling label on the lens to prevent scratching. Please remove before use.
- Select language of English, Spanish, German, Greek or Croatian by pressing the button on the side of the scale. The scale will speak the corresponding language once the language is selected. (Note: Pound units of measurement will be spoken in English. Spanish, German, Greek and Croatian will be spoken in kilograms.)
- Select a volume level of high, low or off by moving the volume dial slide switch on the side of the scale. To turn the voice function off, turn the dial until it clicks off.
- Place scale on flat, hard surface. Carpeted or uneven floors may affect accuracy.
- Press firmly on the scale platform. The scale turns on, beeps and says “Ready for operation.” This process insures the scale is set and is now ready for use. Do this whenever the scale is moved. At all other times step straight onto the scale.
- Step onto the scale platform and remain still. The display will count up to your weight. The display will flash twice when the weight is locked. Your weight is now displayed and you will hear your weight.
- When you step off of the scale, the scale will say “Ready for operation’ and automatically turn off. If you continue to stand on the scale, the scale will beep twice and automatically turn off.
NOTE : If you’ve weighed yourself and the message “Err” is displayed with sound “Error”, simply step off of the scale and repeat the weight measurement procedure while standing still. Your weight cannot be locked-in if you do not stand still.
Reaching Target Weight
Maintaining proper weight is essential to healthy living. Obesity has been linked to a higher risk of heart disease, diabetes and some forms of cancer. The Body Mass Index (BMI) is the most widely accepted measurement of weight according to health professionals. Use the chart below to determine your own BMI by matching your height in the left hand column with your weight in the center. Anyone, male or female, with a BMI of 25 to 29 is considered over weight and a body mass index of 30 is considered obese. Remember to eat right and exercise.
Body Mass InDEX
Trouble Shooting
In Case of Difficulty…
- Place your feet in the same position every time you weigh yourself. Stand still during measurement.
- Weigh yourself without clothing whenever possible. Clothes can vary in weight.
- Move the scale to a location where it won’t be bumped. If your scale is bumped while being activated or while in use, an inaccurate reading may occur.
- For the most consistent readings, weigh yourself at the same time of day. Allow for weight fluctuations due to food or drink in your system.
- The maximum capacity of this scale is 440 lb / 200 kg. Should “O-Ld” appear on the display during a weighing, this indicates that the maximum weighing capacity of the scale has been exceeded. Remove the weight immediately; otherwise, permanent damage may occur.
Precautions
- Clean exposed parts with a soft, slightly damp cloth. To remove stains, use a mild soap. Never use detergents, excess water, treated cloths, harsh cleaning agents, or sprays. Do not attempt to lubricate or open scale casing.
- Although your scale is designed to be maintenance-free, it contains sensitive electronic parts.
- Avoid rough treatment. Do not drop, kick, or jump on it. Treat it with care to ensure the best performance.
- This scale is designed to read weights between 6.6 and 440 lb / 3 and 200 kg. To prevent damage do not place more than 440 lb / 200 kg on it.
- Do not store scale where you store cleaning chemicals. The vapors from some household products may affect the electronic components of your scale. Do not store scale on its side.
- This scale is an extremely sensitive weighing device. In order to prevent run down of the battery, do not store anything on the scale.
- Do not dispose of batteries in fire. Batteries may explode or leak. Do not mix Alkaline, carbonzinc (standard) or Nickel-Cadmium (rechargeable) batteries. Remove the batteries if the scale will not be used for a long period of time.
Five (5) Year Limited Warranty
This scale is warranted against defects in materials of workmanship (excluding
batteries) for five (5) years for the original purchaser from date of retail
purchase. It does not cover damages or wear resulting from accident, misuse,
abuse, commercial use, or unauthorized adjustmentand/or repair. Do not return
to retailer. Should this scale require service (or replacement at our option)
while under warranty, please pack the item in the original packaging and
return it prepaid, along with store receipt showing date of purchase and a
note explaining reason for return to:
- Taylor Precision Products, Inc.
- 2220 Entrada Del Sol, Suite A
- Las Cruces, New Mexico 88001 USA
- www.taylorusa.com
There are no express warranties except as listed above. This warranty gives
you specific legal rights, and you may have other rights which vary from state
to state. For additional product information, or warranty information outside
the USA, please contact us through
www.taylorusa.com
©2012 Taylor Precision Products, Inc. and its affiliated companies, all rights
reserved. Taylor® and Leading the Way in Accuracy® are registered trademarks
of Taylor Precision Products, Inc. and its affiliated companies. All rights
reserved.
Note : This device complies with part 15 of the FCC Rules. Operation is
subject to the following
two conditions:
- This device may not cause harmful interference, and
- his device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FAQs
What is the Taylor 7084 Electronic Glass Bathroom Scale?
The Taylor 7084 Electronic Glass Bathroom Scale is a digital bathroom scale designed for accurately measuring and displaying body weight.
How does the scale measure body weight?
The scale uses advanced electronic sensors to measure body weight when you step onto its surface.
What is the weight capacity of the Taylor 7084 scale?
The Taylor 7084 scale typically has a weight capacity of up to 400 pounds (or kilograms), but please check the product specifications for the specific model you have.
Is the scale suitable for both home and commercial use?
The Taylor 7084 scale is primarily designed for home use, but some models may be suitable for light commercial use. Check the product documentation for details.
Does it display weight in both pounds and kilograms?
Yes, most Taylor 7084 scales have the option to display weight in both pounds and kilograms, allowing you to choose your preferred unit of measurement.
Is the scale made of durable materials?
The scale typically features a tempered glass surface that is both stylish and durable.
Does the scale have an automatic on/off feature?
Many Taylor 7084 scales come with an automatic on/off feature, which means they turn on when you step on the scale and automatically shut off after a few seconds of inactivity to conserve battery power.
What type of batteries does the scale use?
The scale commonly uses standard AAA batteries, which are widely available and easy to replace.
Is the scale easy to clean?
Yes, the smooth glass surface of the scale is easy to clean with a damp cloth, making maintenance simple.
Does it have a memory feature to store multiple user profiles?
Some Taylor 7084 scales may offer a memory feature to store user profiles, allowing multiple users to track their weight over time. Check the product specifications for this feature.
Is there a warranty for the Taylor 7084 Electronic Glass Bathroom Scale?
The Taylor 7084 scale may come with a limited warranty. Be sure to check the product documentation or contact the manufacturer for warranty details.
Can the scale be calibrated if needed?
Most Taylor 7084 scales are factory-calibrated for accuracy. Calibration may not be necessary, but if needed, the product manual should provide instructions on how to calibrate it.
VIDEO-INTRODUCTION
Download This PDF Link:Taylor 7084 Electronic Glass Bathroom Scale Instruction Manual