GoPro HERO4 Silver Camera User Manual

: June 14, 2024
: GoPro

GoPro HERO4 Silver Camera User Manual

GoPro HERO4 Silver Camera

QUICK START GUIDE

HERO4 SILVER

Download the User Manual at
gopro.com/support

When using your GoPro camera as part of your active lifestyle, always be aware of your surroundings to avoid injury to yourself and others, and to prevent damage to your camera.

WARNINGS: Before using your GoPro camera, please read carefully all the safety precautions in the Important Product + Safety Information included with your camera.

HDMI: To see the complete list of country certifications, refer to the Important Product + Safety Information included with your camera

Hello

Congratulations on your new HERO4 Silver camera. This Quick Start Guide will show you the basics of capturing life’s most incredible moments with your GoPro.
To learn more, download the User Manual at gopro.com/support.

JOIN THE GOPRO MOVEMENT

JOIN THE GOPRO

Getting Started

STEP 1
Remove the camera from the housing.

STEP 2
Remove the camera side door and insert a microSD card (sold separately).
(Requires at least a Class 10 or UHS-I microSD card. For a list of GoPro- tested microSD cards, visit gopro.com/support.)

STEP 3
Open the battery door and insert the battery

STEP 4
Charge the battery using the included USB cable.

The Basics

POWERING CAMERA ON AND OFF

To Power On:
Press the Power/Mode button [ ].

To Power Off:
Press and hold the Power/Mode button [ ] for two seconds.

Touch Display

Frame your shots, play back footage and quickly adjust settings on the camera’s touch display.

TOUCH SCREEN GESTURES

Selecting Camera Modes

1. Swipe left on the touch display, and then tap the desired camera mode.

Camera Modes

2. If necessary, select a different capture mode:

a. Swipe up to open the settings menu.
b. Tap Mode, and then tap the desired capture mode.
c. Swipe down to close the settings menu.

Capturing Video and Photos

Select your camera mode, then press the Shutter/Select button [ ] to start/stop recording or take a photo.

QUIKCAPTURE

When the camera is off and QuikCapture is enabled, you can turn the camera on and immediately begin capturing video or Time Lapse photos just by pressing the Shutter/Select [ ] button. Press once for video, press and hold for two seconds for Time Lapse photos. Press again to stop recording and power off the camera. You can turn QuikCapture on/off in Setup mode.

HILIGHT TAG

Press the Settings/Tag button [ ] to tag key moments while recording or playing back video. HiLight Tags help you quickly find the highlights later for easy playback, editing and sharing.

Adjusting Camera Settings

1. On the touch display, swipe left to display the camera modes.
2. Tap the desired mode.
3. Swipe up to display the settings menu for that mode.
4. Swipe up or down to scroll through the options.

5. Tap to select your desired option.
6. When finished, swipe down to exit the settings menu.

To learn more about settings, download the User Manual at gopro.com/support.

Adjusting

Mounting Your Camera

Mount your GoPro to helmets, gear and more with the included Curved + Flat Adhesive Mounts and hardware.

APPLYING + REMOVING ADHESIVE MOUNTS
Apply adhesive mounts to clean, smooth surfaces at room temperature only, at least 24 hours before use. To remove, heat with a hair dryer then peel off mount.

MOUNTING

Mounting Your Camera

Mounting

To learn more about mounting your camera, visit gopro.com/support.

*Surfboard mounts are included with HERO4 Silver/Surf only.

Housing Backdoors

Your HERO4 Silver camera comes with three backdoors, each designed for different uses and environments.

STANDARD BACKDOOR
Provides waterproof protection to 131’ (40m).
Use when shooting under water or in wet, damp or dirty conditions.

TOUCH BACKDOOR
Enables access to the camera’s touch display. Provides waterproof protection to 10’ (3m).
(Touch functionality is not available under water.)

SKELETON BACKDOOR
Not waterproof—use in dry, dirt-free environments only. Enables enhanced audio capture during low-speed activities.

Swapping Backdoors

STEP 1
Open the housing so the backdoor hangs downward.

STEP 2
Pull down on the backdoor until it snaps free from the hinge.

STEP 3
Align the new backdoor with the hinge.

STEP 4
Push up on the backdoor until it clicks into place.

Playing Back Videos and Photos

There are several ways to play back your videos and view your photos.

COMPUTER

Connect the camera to your computer with the included USB cable to transfer content for playback.
For help accessing your GoPro content, download the latest GoPro software at gopro.com/getstarted.

SMARTPHONE + TABLET
Use the GoPro App to play back content on your smartphone or tablet. For more info, see GoPro App.

LCD TOUCH BACPAC™
This removable LCD touch screen seamlessly attaches to the back of your GoPro, delivering quick playback of videos and photos (sold separately).

TV
See your content on the big screen.
Connect your camera to your TV with a micro HDMI*, composite or combo cable (sold separately).

There are a few ways to share your videos and photos.

COMPUTER
Connect the camera to your computer with the included USB cable to transfer content for sharing.

SMARTPHONE + TABLET
Use the GoPro App to share videos and photos by text, email or on your social networks. For more info, see GoPro App.

*For video resolutions above 1080p60 fps, HDMI playback may only be supported at 1080p60 fps.

GoPro App

CONTROL. VIEW. SHARE.
The GoPro App lets you control your camera remotely using a smartphone or tablet. See what your camera sees with live preview. View photos and play back videos, then share your favorites via email, text, Facebook, Twitter and more.

TO CONNECT TO THE GOPRO APP
1. Download the GoPro App and open it on your smartphone or tablet.
2. Follow the app’s on-screen instructions to connect your camera.
(If needed, the default password for your camera is goprohero.)

For complete pairing instructions,
visit gopro.com/support.