dji Mini 4 Pro Fly More Combo Plus User Guide

June 14, 2024
DJi

DJI Mini 4 Pro Fly More Combo Plus

Product Information

Specifications

  • Weight: 3 units
  • Radius: 4 units
  • Installation Circumference: YCBZSS00256903

Product Usage Instructions

Installation

  1. Carefully read the entire user manual before use.
  2. Ensure that the device is powered off before installation.
  3. Attach the propeller guard to the designated area of the device. Refer to the provided link (https://s.dji.com/m4p-propeller-guard) for detailed instructions and diagrams.

Safety Precautions

Before using the product, it is important to follow these safety precautions:

  • Read and understand all safe and lawful practices provided in the user manual.
  • Avoid touching the moving parts of the device to prevent injuries.
  • Keep a safe distance from people, animals, and objects during operation.
  • Ensure that the propeller guard is securely installed before flying the device.

Troubleshooting

If you encounter any issues with the product, refer to the official website (https://www.dji.com/mini-4-pro/downloads) for troubleshooting guides and support.

Frequently Asked Questions (FAQ)

Q: How should I attach the propeller guard?

Q: What should I do if the propeller guard is loose?

  • A : Ensure that the propeller guard is securely attached before flying the device. If it continues to be loose, contact customer support for assistance.

Q: Are there any safety precautions I should follow?

  • A : Yes, it is important to read and understand all safety precautions provided in the user manual. Avoid touching moving parts, maintain a safe distance from people and objects, and always ensure the propeller guard is properly installed.

Q: Where can I find troubleshooting guides?

  • A : Visit the official website (https://www.dji.com/mini-4-pro/downloads) for troubleshooting guides and support.
  • Carefully read this entire document and all safe and lawful practices provided before use.

ASSEMBLY INSTRUCTION

  • DO NOT use the propeller guard in windy environments.
  • When the propellers are rotating, stay away from the propellers and propeller guards to avoid injury.
  • The aircraft weight exceeds 250 g after the propeller guard is installed. Make sure you understand and comply with the local laws and regulations and, if required, have obtained corresponding approval and clearance from the related government agencies before flight.
  • When using the propeller guard together with the Intelligent Flight Battery, the recommended maximum takeoff altitude of the aircraft is 1500 m (4,921 ft), the maximum flight height is 120 m, and the maximum flight distance is 500 m. DO NOT use the propeller guard together with the Intelligent Flight Battery Plus.
  • After installing the propeller guard, hover the aircraft for approximately six seconds until DJI Fly prompts that the propeller guard has been detected. The aircraft is ready to fly once the propeller guard is detected.
  • After installing the propeller guard, the flight height, flight distance, and maximum flight speed will be limited. Pay attention to prompts in DJI Fly. Fly with caution and maintain a visual line of sight of your aircraft when using the propeller guard.
  • Before installing the propeller guard onto DJI Mini 4 Pro, make sure to update the aircraft firmware to v01.00.0200 or later. Otherwise, flight stability cannot be guaranteed.
  • After installing the propeller guard onto DJI Mini 4 Pro, the obstacle sensing function will be unavailable.
  • The aircraft cannot actively bypass obstacles or brake when obstacles are on its route. There is no obstacle sensing when using intelligent flight modes, either.
  • If the max power load alarm prompts, fly with caution.

Specifications

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals