GoPro HERO10 Black Bones Camera User Manual

GoPro HERO10 Black Bones Camera User Manual

QUICK START

1. Download the GoPro Quik App

2. Insert SD Card

3. Connecting to Your Drone

Note: Please check polarity and wire configuration.
Incorrect wiring can permanently damage camera

4. Powering On

Note: The LED will blink 3x after powering on.

5. Pairing with the App

Aim your GoPro camera lens at the QR code to begin pairing with the GoPro Quik app on your phone.

Note: The LED will blink 2x to confirm QR has been read.

6. Finishing Pairing with the GoPro Quik App

The GoPro Quik app is the easiest way to switch modes, adjust settings and frame your shot.

Note: Your camera must be within 1 meter of your phone to pair with the GoPro Quik app. Auto Upload is not supported by HERO10 Black Bones.

Use the included mounting fingers to use your camera with GoPro mounts.

Aim your GoPro camera lens at the QR code to set up your camera up with these settings:

• Video: 4K60 4:3
• Lens: Wide
• ISO: Max 1600
• HyperSmooth: Off
• Color: Flat
• EV Comp: -0.5
• Bit Rate: High
• Sharpness: Medium

For more information and QR codes, go to gopro.com/bones

WARNING: HERO10 Black Bones is not waterproof.

For best performance, ensure there is enough airflow around your camera.

GoPro HERO10 Black Bones Camera

DOWNLOAD

GoPro HERO10 Black Bones Camera User Manual -[Download PDF]

GoPro HERO10 Black Bones Camera Quick Start Guide – [Download PDF]

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>