CASIO MA1211-ED Casual Classic Digital Bracelet Watch User Guide
- June 14, 2024
- Casio
Table of Contents
CASIO MA1211-ED Casual Classic Digital Bracelet Watch User Guide
Reading the display
SU: Sunday, MO: Monday, TU: Tuesday, WE: Wednesday, TH: Thursday, FR: Friday, SA: Saturday (Changeover between 12-hour and 24-hour formats) In regular timekeeping mode, with every push of A, the display is switched between 12-hour and 24-hour formats.
Setting daily alarm
If the daily alarm is set, the buzzer sounds for 20 seconds at the preset time every day until cleared. To stop the buzzer, press the L button. If the time signal is set, the watch sounds every hour on the hour. (Sound demonstration) Press and hold the A button in alarm mode to sound the buzzer.
[Hour setting]
Press L in the daily alarm mode to set hour. One hour advances with every push of A.
[Minute setting]
Press L to set minute digits. One minute advances with every push of A. Press L to complete.*
*If the C button is pressed, the watch reverts to the regular timekeeping mode. (Quick digit advance) When the A button is pressed for more than 2 seconds, the digit advances quickly. When released, the digit advance will stop.
[On or off setting of daily alarm and time signal]
Setting time and calendar
[Regular timekeeping]
Press Cthree times to change regular timekeeping mode to time/calendar setting mode.
[Second adjusting]
Press A to adjust seconds.*
[Hour setting]
Press L to move to the hour setting. Press Ato increase the number.
[Minute setting]
Press L to move to the minute setting. Press Ato increase the number.
*Precise time can be maintained by correcting the seconds once a month on a time signal from a radio, TV, telephone, etc.
(Quick digit advance) When the A button is pressed for more than 2 seconds,
the digit advances quickly. When released, the digit advance will stop.
Specifications
Accuracy at normal temperature: ±30 seconds a month Display capacity:
-
Regular timekeeping mode
Hour, minute, second, am/pm, date and day
Calendar system: Auto-calendar set at 28 days for February -
Daily alarm mode
-
Hourly time signal function
-
Stopwatch mode
Measuring capacity: 59 minutes 59.99 seconds
Measuring unit: 1/100th of a second
Measuring modes: Normal time, net time, split time and 1st-2nd place times
Battery:
One lithium battery (type: CR-2016 –– except Module 1271/BR-2020 –– Module
1271 only)
Approx. 7 years operation on type CR-2016 (except Module 1271) /10 years on
type BR2020 (Module 1271 only). [assuming alarm operation for 20 sec./day and
one light operation for 1 sec./day]
NOTE: THERE IS NO WAY unit components can be damaged or malfunction, due to misoperation of buttons. If confusing information appears on th
Stopwatch operation
A signal confirms start/stop operation (Working range) The stopwatch display is limited to 59 minutes 59.99 seconds, for longer times reset and start C again.
(a) Net time measurement
(b) Split time measurement
(c) 1st-2nd place times
IMPORTANT: Setting sequence MUST BE FOLLOWED when making any new setting.
[Month setting]
Press L to move to the month setting. Press A to increase the number.
[Date setting]
Press Lto move to the date setting. Press Ato increase the number.
[Day setting]
Press L to move to the day setting. Pressing Aadvances to the next day. And press C to complete.
- Correction of any digit, if not required, can be skipped by pressing the L button repeatedly.
- If you do not operate any button for a few minutes while a selection is flashing, the flashing stops and the watch goes back to the regular timekeeping mode automatically.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>