VIEWEDGE B0BVTLLP85 24 Inch Monitor FHD 1080p 100Hz User Manual
- June 15, 2024
- VIEWEDGE
Table of Contents
MONITOR
User Manual
B0BVTLLP85 24 Inch Monitor FHD 1080p 100Hz
ABOUT WARNING SIGNS
This symbol indicates a potentially hazardous situation which, if ignored and
mishandled, could result in personal injury and property damage, possibly
serious injury
- This manual is applicable to model cs270Hmonitor
- Please follow the instruction manual for proper handling and use of the monitor
- Do not tamper with the inside of the monitor
- Please use the power cord and cable provided with this product as far as possible
- Reproduction of all or part of the contents of this publication is strictly prohibited for the purpose of obtaining permission.
- The content of this publication is subject to change in the future, please subscribe to the website to get the latest content
- This manual has been carefully prepared, if you have found any errors or omissions, please contact our after-sales email : [email protected]
PRE-USE INSTRUCTIONS
Thank you for purchasing this product, please read it carefully and use the
book correctly before use.
In addition, the accompanying product manual and the product website describe
Warranty Policy.
If you have a problem with your product, please review the warranty policy and
contact our after-sales email
PRODUCT FEATURES
- 27Inch monitor
- Supports up to 2560X1440P resolution
- 165Hz refresh rate
- Flat screen
STANDARD PAYABLES
In addition to the monitor itself, please make sure that all of the
following items are included
- Power cord *
- Bracket screws
- Display base
- HDMI cable
- VESA screws
- DP cable
- Product manuals
IMPORTANT PRECAUTIONS
Before using the product, please read the following precautions carefully and
be sure to follow them.
If any abnormaities occur
If there is smoke, strange smell or noise, turn off the power switch
immediately, unplug from the power outlet and contact your dedler or VEWEDGE
after-sales center for service, Direct use can cause fire and electric shock.
Do not remove or modify cabinets
The cabinet is not dismantied or modified with higher voltage parts inside,
dismantiing the cabinet or modifying it can lead to fire or electric shock.
Do not place vases or cups near monitors
Do not place containers containing water or other liguids or solvents near the
monitor. Spillage or entry can cause fire, electric shock, or malfunction. If
water or other conditions are encountered, immediately turn off the power
switch and unplug the power supply from the electrical outiet.
Do not place it in an unstable place
Do ot place the device on an unstable surface, such as an unstable table or on
a tit. It couid fall or tip over and cause injury. Place the monitor on a
fiat, sufficiently sturdy and stable surface. If the monitor is dropped or the
case is damaged, immediately turn off the power switch and unplug it from the
outlet, which may cause a fire o electric shock f the monitor is used as is.
Do not use in places where water is present
Please do not use it in the bathroom and other places where water or moisture
enters. It can cause fire and electric shock.
Ground the power cord grounding lead
For safety reasons, make sure the grounding lead is grounded. Make the
grounding connection before inserting the power plug into the power outlet.
Also, when removing the grounding, remove the grounding after unplugging the
power plug from the power outlet. If the sequence is wrong, it can lead to
electric shock.
Before using the product, please read the following precautions carefully and
be sure to follow them.
Do not damage the power cord
Do not piace heavy objects on the power cord or press it under the monitor. In
addition, do not forcibly bend, pull or heat The cord is damaged, resulting i
fire or electric shock
Choose where to place it
Do not place it underneath. It may cause fire, electric shock or malfunction.
x Places where there is a lot of humidity or dust
x Places where fumes or heat shine, such as by cooking tables or humidifiers
x Places where direct sunlight or sighting shines directly onto the screen
x Near heating apphances
Hold the plug and pull it out.
Do not pull off the power cord when unplugging the AC adapter, power cord or
signal cord scratching the cord may result in fire or electric shock. Be sure
to unplug the plug by grasping the part
Do not touch the power plug with wet hands
Do not re-plug the power supply with wet hands. May cause electric shock
Disconnect external connection cords when moving.
Turn off the power switch, make sure that the power plug is unplugged from the
power outlet, and make sure that connections such as signal cables have been
unplugged and moved. Fire or electric shock may result.
CORRECT POSTURE TO USE THE PRODUCT
- Take care of your eyes
The position of the screen should be slightly lower than the height of the
eyes, about 40-60cm away from the eyes before itis easy to see and will not
feel fatigue. If the room used is too dark, the eyes will be fatigued. Please
use it at the appropriate brightness. In addition, a long time to continue to
look at the screen will cause eye fatigue, it is recommended to rest about 10
minutes every hour. TO PREVENT LCD SCREEN BURN-IN
Displaying the same screen for a long period of time may cause screen burn-in
(afterimage).
To prevent LCD screen burn-in:
-
Use screensavers with moving images or all-white screens
-
Change the desktop screen background regularly.
-
Set the LCD screen brightness to a subdued level
-
Turn off the LCD monitor when not using the computer.
If the LCD screen is burned out: -
Turn off the LCD monitor for several hours.
-
Set the screen saver to all black or all white and leave the screen saver on for a few hours.
MOVING AND LIFTING THE MONITOR
When moving or lifting the monitor, follow these instructions to prevent the
monitor from being scratched or damaged and to ensure safe transportation,
regardiless of its shape or size.
- Place the monitor in the original box or packing material before attempting to move it
- Before moving or lifting the monitor, disconnect the power cord and all other cables.
- Hold the bottom and side of the monitor frame firmly. Do not hold the panel itself.
- When holding the monitor, the screen should face away from you to prevent it from being scratched,
- When transporting the monitor, do not expose the monitor to shock or excessive vibration.
- When moving the monitor, keep it upright and never turn the monitor on its side or tit it sideways.
Avoid touching the monitor screen as much as possible.
– This may result in damage to the screen or some of the pixels used to create
images.
Maintenance Guide
Note: Please read and follow the safety instructions before cleaning the
monitor.
Warning: Before cleaning the monitor, unplug the monitor power cord from
the power outlet.
For best practice, please follow the instructions in the list below when
unpacking, cleaning, or operating the monitor:
- If you find white powder when you open the monitor package, please wipe it off with a cloth. The white powder may be generated during the transportation of the monitor.
- When cleaning the antistatic screen, wet a clean soft cloth slightly in water.
- If possible, use special screen cleaning tissues or solvents suitable for antistatic coatings.
- Do not use any harsh chemicals or harsh paper or cloth to clean the screen, as these may damage or scratch the screen surface.
- Avoid using excessive pressure: Do not press hard on the LCD screen as this may cause damage to it. Also, don’t place heavy objects on top of the screen that can put pressure on it
- Avoid using excessive pressure: Do not press hard on the LCD screen as this may cause damage to it. Also, don’ place heavy objects on top of the screen that can put pressure on it.
- Avoid direct sunlight: Avoid direct sunlight hitting the screen as this can darken or “burn in” the screen. If the screen is in direct sunlight, reposition the monitor or use a’sun visor.
- Turn off display when away: If you don’t need to use the display for a while, turn it off.
- This not only prolongs screen life, but also saves energy.
- Avoid Prolonged Use: Prolonged use of LCD monitors may cause “burn-in’ phenomenon.
Therefore, you should try to avoid using the monitor continuously for more than a few hours. If you need to use the monitor for a long time, you can display moving images on the screen or use a screen saver
OPERATION AND INSTALLATION
CONTROL MENU OPERATION
- ” ” Power wsich key
- ” E ” Source selection / Exit
- ” “ Volume adjustment / Up(Right) direction selection key
- ” ” sight / Down(Left) direction selection key
- ” M ” Menu Key / Enter Key
ON SCREEN DISPLAY (OSD)
* The above functions moy be adjusted due to different models or software
version upgrades.
For details, please refer to the electronic user manual on the VIEWEDGE
official website.
Input Source
Select the output method of the monitor
- If your monitor signal cable is connected to a different output device, you can use this option to select the signal cable of your output device, the output device to which the signal cable is connected is already displayed
ON SCREEN DISPLAY (OSD)
Brightness/Contrast
Brightness:
This option will adjust your displays brightness.
Contrast:
This option will adjust the amount of differ-ence between white values and black values.
DCR:
Turn on this feature and the monitor can automatically adjust the brightness and contrast to increase the depth of blacks when displaying dark scenes and the brightness of whites when displaying bright scenes
ON SCREEN DISPLAY (OSD)
Color Setting
Gamma:
This option will adjust your displays brightness. Use the up and down buttons to increase or decrease brightness setting
Picture Mode:
This option is a preset image mode for the monitor, which can help you quickly adjust brightness, contrast, color and other parameters to adapt to different usage scenarios
Color Temperature:
This option can adjust the color temperature of the display, that s the degree to which the colors displayed on the screen are warmer or cooler
Hue:
This option can adjust the color shift of the monitor and change the color tone displayed by the monitor
Saturation:
This function can adjust the saturation of the display to make your picture more vivid and soft
Low Blue Light:
Turning on this function can reduce the biue light output by the monitor ‘screen, thereby reducing eye irritation and relieving eye fatigue and discomfort caused by prolanged use of the monitor
ON SCREEN DISPLAY (OSD)
Picture Quality
Seating
Sharpness:
This option adjusts the monitor’s image sharpness, making the edges of the image clearer, However, setting Sharpness oo high can result in jagged edges and other unnatural visual effects in the image
Response Time:
After this option s turned on, the response speed of the display can be improved, image blurring and afterimages can be reduced, and the smoothness of games and videos can be improved
Noise Reduction:
Turn on this feature to reduce image noise on the monitor and improve image quality
Super Resolution:
Turn on this feature to convert a low-resolution image to a high-resolution image, improving image clarity and detail
Dynamic Luminous Control:
Turn on this function and the monitor will automatically adjust the brightness of the manitor according to the brightness change of the displayed content to improve the image quality and comfort
Blacklevel:
This option is used to adjust the monitors black level, which s the depth of black. By adjusting this setting, you can make blacks appear darker o lighter. Generally speaking, if the black is too dark, details will be lost; conversely, if the black is too light, the image will appear gray.
ON SCREEN DISPLAY (OSD)
Display
Aspect Ratio:
This option will adjust the monitors aspect ratio screen.
Use the Up and Down buttons to make your selection.
This option is automatically set by the system no need to adjust
ON SCREEN DISPLAY (OSD)
OSD
Language:
This selection will change the language on Screen Display.
After entering use the up and down buttons to change the position left to right
OSD H-Position:
This selection will change the horizontal position of the On Screen of the On Screen Display Menu
OSD V-Position:
This selection will change the vertical Display Menu.
OSD Transparency:
This selection will adjust OSD menu transparency on the screen
OSD Time Out:
This selection will adjust 0SD menu display time on the screen
OSD Rotation:
Press MENU to shows the main choice menus, press MENU into DCR choice item, press up or down to select ON or OFF, press menu to open or close DCR function
ON SCREEN DISPLAY (OSD)
Other
MPRT:
Turn on this feature to turn on the monitor’s game mode to reduce motion blur and interference, thus improving the visual effect and clarity of the game.
Reset:
This function can restore the settings of the monitor to the factory settings
INSTALLING THE MONITOR
PLEASE NOTE
- Illustrations in this document represent typical procedures, so they may look different from the actual product.
- Place the the product facing down on the Styrofoam (cushion) , If Styrofoam is unavailable, use a thick sitting mat.
- Applying excessive force when tightening screws may cause damage to the monitor. Damage caused in this way will not be covered by the product warranty.
- Do not carry the monitor upside down by just holding the base.This may cause the monitor to fall off the stand and could result in personal injury.
- When lifting or moving the monitor,do not touch the monitor screen.The force applied to the monitor screen may cause damage to it.
MAKING CONNECTIONS
Select a connection method suitable for your PC.
Connecting parts may differ in different products.
Provided ports may vary depending on the product.
For more cable descriptions, please refer to the VEWEDGE website
([email protected])
- If itis o desktop computer,the cable needs to be connected to the interface os the graphics card,not the interface of the motherboard
- High brush monitor to achieve a perfect picture refresh rate requires the use of DP cable support.
Connection Using the HDMI Cable
Connection Using an DP
Cable
– A DP cable shorter under 15 m in
length is recommended. Using a cable longer than 15 m can affect the picture
quality.
Connecting to Headphones
– Use headphones when
activating sound with an HDMI-HOMI or DP cable.
– The earphone jack supports only the 3 conductor tip-ring-sleeve (TRS) type
FREQUENTLY ASKED QUESTIONS
- If there is a problem with the monitor, you can refer to the following detection methods
- If you experience symptoms not listed here, or if they do not go away after you follow the instructions, please stop using the monitor and unplug it from the power outlet and contact viewence after-sales email with your Amazon order number with the fault video
Noting is displayed on the screen
Is the monitor's power cordplugged in?
• Check if the power cord is correctly plugged into the power outlet.
Is the power LED on?
• Check the power cable connection and press the power button. • Try to change a power cable with the same specifications (power cable specifications for 12V=4A 5.5mmxX2.0mm)
Is the power LED blinking?
• If the monitor is in sleep mode, move the mouse, or press any key on the keyboard, to switch the display on. • Check if the computer is turned on.
Is the OUT OF RANGE message being displayed?
• This occurs when signals transferred from the PC (graphics card) are out of the horizontal or vertical frequency range of the monitor. Please see the Product Specifcation section of this manual to set the appropriate frequency.
Is the No Signal message being displayed?
• Check whether the monitor is connected to the correct port(note that it is the graphices card interface,not the motherboard interface),check whether the device connection cable is inserted firmly,and use the buttons to adjust to the correct signal receiving prot.
How dol adjust the angle of my monitor
This type of monitor supports up and down adjustment of -5 ° to 15° 1. Hold the monitor base 2. And then, use your other hand to gently lift the bottom of the monitor to lift it up. Please be careful not to press the screen. You just need to adjust the monitor to the angle you need.
How do I turn the crosshair on
This product is built with multiple styles of crosshairs that you can turn on by clicking the second button on the back of the screen and dismiss it by pressing the menu button.
Why the monitor dose not reach 144Hz refresh rate
1. First you need to determine whether the monitor you buy can achieve a high brush of 165Hz 2. Check whether your computer graphics card has a DP interface 3. Use the correct cable, to reach the 165Hz refresh rate you need to use the DP cable 4. whether the signal cable is plugged into the interface of the graphics card rather than the motherboard interface
Why am I connected to the headset in the monitor but no sound
WARRANTY POLICY
- WARRANTY COVERAGE
- Within one month of purchasing the product the product will be returned if there is a quality problem
- WARRANTY TIME LIMIT
- The warranty period is there years from the date of purchase
- Please contact us with your order number from Amazon and we will provide you with an extended warranty
- Email:[email protected]
- THIS LIMITED WARRANTY DOES NOT APPLY TO: (“EXCLUSIONS”)
- Removal, modification, defacement or damage to the warranty seal and original factory serial number.
- Damage caused by improper installation, including but not limited to incorrect or inadequate power supply.
- Damage caused by long-term display of still images (also known as “image residue’) or by improper use.
- Damage (including cosmetic damage such as scratches, spots or dents), malfunction, loss or personal injury caused by abuse, misuse, neglect, improper maintenance and storage or acts of nature.
- Damage occurring during transportation or movement by the customer .
- Damage caused by infection or installation of illegal software.