MONITOR AUDIO TB 06 In Ceiling Speaker Music Streaming System Instruction Manual

June 14, 2024
MONITOR AUDIO

MONITOR AUDIO logo

TB 06
Installation Amplifiers Speaker
Library
Speaker Library Version 3

MONITOR AUDIO TB 06 In Ceiling Speaker Music Streaming
System

MONITOR AUDIO GROUP
ROKSAN
BLOK

Speaker Library

The Monitor Audio speaker library for the second generation of Installation Amplifiers contains a detailed database of all of the loudspeakers commonly used with the Installation Amplifiers. This includes the Creator Series, Climate Garden and Cinergy.
The Library should be used when setting up your loudspeakers with one of the amps. It can be downloaded from the URL below or by scanning the QR code:
https://brand.monitoraudio.group/d/n8o5sDWgpzZK/document- library/show/eyJpZCI6OTUwMSwidGltZXN0YW1wIjoiMTY4NzQ0MDAxMiJ9:monitor-audio :BwNf-F8bJRkXJYg8jPLsoeUbSoHEAyGHN0bqYgEb2oI

Change Log

Cinergy: limiter settings have now been added to reduce any damage to the speakers
Climate Garden: EQ profiles have been updated to improve tonal balance & performance

Loading the library

  1. After downloading the library from the above link, navigate to the web GUI for the amplifier you wish to setup. Select “Settings”, then “Speaker Library” and “Import”MONITOR AUDIO TB 06 In Ceiling Speaker Music Streaming System - Loading the library 1
  2. Click where it says “Speaker Library File (.zcl)”, select the file you have just downloaded and click on “Load”MONITOR AUDIO TB 06 In Ceiling Speaker Music Streaming System - Loading the library 2MONITOR AUDIO TB 06 In Ceiling Speaker Music Streaming System - Loading the library 3MONITOR AUDIO TB 06 In Ceiling Speaker Music Streaming System - Loading the library 4
  3. Next, go to “Output”, then “Speaker Preset” and then “Select Preset from Library”MONITOR AUDIO TB 06 In Ceiling Speaker Music Streaming System - Loading the library 5
  4. Select the loudspeaker you are installing and the correct profile will be loaded with the right limiters and settings for that particular loudspeaker.MONITOR AUDIO TB 06 In Ceiling Speaker Music Streaming System - Loading the library 6

MONITOR AUDIO TB 06 In Ceiling Speaker Music Streaming System - Loading the
library 7

If using one of the Climate Garden loudspeakers, the preset needs to be tweaked slightly because the 100v line option gets reset when loading the preset.
The same applies if the outputs are to be bridged. This will also need to be re-applied under Output Mode (not shown below).

  1. Click on “Customize Preset”MONITOR AUDIO TB 06 In Ceiling Speaker Music Streaming System - Customise Preset
  2. Click on “Output Mode” and the re-select “Hi-Z 100v”MONITOR AUDIO TB 06 In Ceiling Speaker Music Streaming System - Output ModeOnce the preset has been loaded all routing of the signal can be done along with any other customization.
    IMPORTANT: For the Cinergy Sub15 to meet THX requirements, it must be used with our preset profile.

Monitor Audio Ltd.
24 Brook Road
Rayleigh, Essex
SS6 7XJ
England
Tel: +44 (0)1268 740580
Email: technical@monitoraudio.group
monitoraudio.com
©Monitor Audio Ltd. | V1-2023 – M-3-06-006
Listen Again.
**** Read me, keep me or recycle me

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

MONITOR AUDIO User Manuals

Related Manuals