ODK 63 Inch Double Sided Keyboard Drawer Square Table User Manual

DESK WITH DOUBLE SHELVES
AND KEYBOARD TRAY
USER MANUAL

63 Inch Double Sided Keyboard Drawer Square Table

Thank you for choosing our product.
Parts List to make sure all parts are included.
Feel free to contact us if you have any concerns or questions about your
Package Contents

• Desk with double shelves and keyboard tray
• Assembly tool kit
• Instruction manual

Precautions

| 1. Avoid long-term direct sunlight exposure.
---|---
| 2. Keep away from heat.
| 3. Keep away from sharp objects.
| 4. Keep infants/children away from assembly parts to avoid choking and suffocation.
| 5. Keep away from corrosive substances.
| 6. Pay attention to avoid over-tightening fasteners, or they may induce cracking within the board.

Disassembly Diagram

Parts List

For ease and safety, we recommend two people for assembly.

Assembly Instructions

1 Please note the posion of screw holes while assembling foot pads on part N and M.

2 Please carefully browse the different positions indicated by the arrows in the figure to avoid the wrong installation of steel frame E. 3 Please note the hole direction of M and N while assembling them on part E.

5 There are 2 options when assembling part L, please choose a position that meet your needs.

8-1

1. Please note the hole position while assembling the left slides.
2. Please note that the screws are self-tapping, you’d better tighten them hard while assembling this part.
3. Any assmbling problems you can scan the code and watch the video on website.

8-2

1. Please note the hole position while assembling the left slides.
2. Please note that the screws are self-tapping, you’d better tighten them hard while assembling this part.
3. Any assmbling problems you can scan the code and watch the video on website.

9 Pay attention to the sliding direction of the slide rail during installation.

10

1. Please use the right screws to avoid breaking througn the board with wrong screw.
2. Please use side b conenct the main frame when assembling part H.
3. Please note the cable management hole should be at the same side with part F.
   Please pay attention to the direction of the hole on side “a”. After desktop H is turned over, the “a-1” part should be on the same side as “F”(as shown in the figure).

13 Install the assembled display table on the desktop with eight ③ screws.

Customer Service

30-DAY Return Policy
If you’re not completely satisfied with your purchase, simply return the merchandise via our official customer support.
Unused merchandise can be refunded or exchanged within 30 days from the original purchase date.

1-Year Warranty
We guarantee your product is free from defects in product material and workmanship for one (1) year starting from the date of purchase during normal use of household conditions. If your appliance fails to operate properly within our warranty period, we will arrange a new one. Replacement is free and all shipping costs are covered.

Quick Response within 24 Hours
If you are still unable to resolve the issue you are experiencing, please contact us immediately via our support email. It doesn’t matter if the product has been installed or not, our customer support team will respond within 24 hours and assist you quickly and efficiently. The most efficient way to confirm your problem to us is to attach a video, which illustrates your product issues.

Problems You May Encounter

You can contact us and we will get back to you within 24 hours.
Or, you can reach us via after-sales email.
Having issue(s) while reading the instruction or completing the assembly.| You can contact us and we will get back to you within 24 hours.
Or, you can reach us via after-sales email.
Encountering non-human caused damage during usage.| If the product is damaged due to non-human causes, please keep the product and send us photos of it. We will ascertain the cause of the product damage within 48 hours and provide you with a satisfactory solution.
Table Surface| Board Surface is broken, scratched or lack of somescrew holes.| You can contact us and we will get back to you within 24 hours.
Or, you can reach us via after-sales email.
The screw holes that on the board and the steel frame don’t line up.| 1. Please tighten the screws on the board by 70%, do not tighten completely.
2. Adjusting board and steel frame until the screw holes are lined up, then tighten all the screws.
The desk board is uneven or not tight that has gaps after being assembled.| 1. Loosen the screws in the uneven or gap positions; adjust until the desktops are flat and tight, and then tighten the screws.
2. If your problem still can’t be solved, please feel free to contact us.
Steel Frame| The steel frame is bent, broken, painted,
rusted or damaged.| You can contact us and we will get back to you within 24 hours.
Or, you can reach us via after-sales email.
The table is unstable after being assembled.| 1. Check if the screws are tightened.
2. Read throughout the manual, check are there any parts installed incorrectly or missing assembled.
3. If your problem still can’t be solved, please feel free to contact us.
Encountering non-human caused damage during usage.| If the product is damaged due to non-human causes, please keep the product and send us photos of it. We will ascertain the cause of the product damage within 48 hours and provide you with a satisfactory solution.

We are committed to providing our customers with premium
quality products and convenient customer service.
MADE IN CHINA

Documents / Resources

| ODK 63 Inch Double Sided Keyboard Drawer Square Table [pdf] User Manual
63 Inch Double Sided Keyboard Drawer Square Table, Double Sided Keyboard Drawer Square Table, Sided Keyboard Drawer Square Table, Keyboard Drawer Square Table, Drawer Square Table, Square Table, Table
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>