APC SRT10KRMXLI Smart-UPS SRT 10000VA Specification and Datasheet

APC SRT10KRMXLI Smart-UPS SRT 10000VA

Overview

• Presentation High density, double-conversion on-line power protection with scalable runtime.
• Lead time Usually in Stock

Main

• Main Input Voltage:
• • 230 V
  • 400 V (3 phases)
• Other Input Voltage:
• • 220 V
  • 240 V
  • 380 V
  • 415 V
• Main Output Voltage:
• • 230 V
• Other Output Voltage:
• • 220 V
  • 240 V
• Rated Power:
• • In Watts: 10,000 W
  • In VA (Volt-Amperes): 10,000 VA
• Output Connection Type:
• • 6 IEC 60320 C13
  • 3 IEC Jumpers
  • 4 IEC 60320 C19
• Output Connector Type:
• • Hard wire 3-wire (H N + E) – 1
• Number of Rack Units:
• • 6U
• Provided Equipment:
• • CD with software
  • Documentation CD
  • Installation guide
  • Rack mounting hardware
  • Rack mounting brackets
  • Rack mounting support rails
  • Temperature probe
  • USB cable
  • Warranty card
  • Web/SNMP management card

Batteries & Runtime

• Battery Type: Lead-acid battery
• Number of Battery Filled Slots: 0
• Battery Recharge Time: 1.5 hours
• Number of Battery Replacement Quantity: 2
• Battery Voltage: +/- 192 V (split battery referenced to neutral)
• Battery Charger Power: 876 W rated
• Battery Life: 3 to 5 years
• Replacement Battery: APCRBC140
• Extended Runtime: 1

General

• UPS Type: Double conversion online
• Product Web Sub-family: High density
• Number of Power Module Free Slots: 0
• Number of Power Module Filled Slots: 0
• Redundant: No

Physical

• Colour: Black
• Height: 26.3 cm
• Width: 43.2 cm
• Depth: 71.5 cm
• Net Weight: 111.82 kg
• Mounting Location: Front
• Mounting Preference: No preference
• Mounting Mode: Rack-mounted
• Two Post Mountable: 0
• USB Compatible: Yes

Input

• Network Frequency: 40…70 Hz auto-sensing
• Number of Input Connectors:
  • 1 hard wire 3-wire (1P + N + E)
  • 1 hard wire 5-wire (3P + N + E)
• Input Voltage Limits:
  • 100…275 V adjustable (half load)
  • 173…476 V adjustable (half load)

Output

• Maximum Configurable Power in VA: 10,000 VA
• Maximum Configurable Power in W: 10,000 W
• Output Frequency: 50/60 Hz +/- 3 Hz sync to mains
• Wave Type: Sine wave
• Harmonic Distortion: Less than 2%
• Crest Factor: 3 : 1
• Bypass Type: Internal bypass (automatic and manual)

Conformance

• Product Certifications:
• • CE
  • EAC
  • IRAM
  • RCM
  • VDE
• Marking:
• • CE Mark
• Standards:
• • EN/IEC 62040-1:2019/A11:2021
  • EN/IEC 62040-2:2006/AC:2006
  • EN/IEC 62040-2:2018

Environmental

Operating Conditions:

• Ambient Air Temperature for Operation: 0…40 °C
• Relative Humidity for Operation: 0…95% non-condensing
• Operating Altitude: 0…10,000 ft

Storage Conditions:

• Ambient Air Temperature for Storage: -15…45 °C
• Storage Relative Humidity: 0…95% non-condensing
• Storage Altitude: 0.00…15,240.00 m

Other Specifications:

• Acoustic Level: 55 dBA
• Heat Dissipation: 1,947 Btu/h
• IP Degree of Protection: IP20

Communications & Management

• Free Slots: 1
• Preinstalled Device: Network management card 3 with environmental monitoring
• Alarm: Audible and visible alarms (prioritized by severity)
• Emergency Power Off: Yes

Surge Protection and Filtering

• Surge energy rate: 480 J

Packing Units

• Unit Type of Package 1: 1 PCE
• Number of Units in Package 1: 1
• Package 1 Height: 46.1 cm
• Package 1 Width: 60 cm
• Package 1 Length: 100 cm
• Package 1 Weight: 129.727 kg

Offer Sustainability

• Sustainable Offer Status: Green Premium product
• REACh Regulation: REACh Declaration
• EU RoHS Directive: Compliant
  • EU RoHS Declaration: Included
• Mercury Free: Yes
• RoHS Exemption Information: Yes
• Environmental Disclosure: Product Environmental Profile
• Circularity Profile: End of Life Information
• WEEE (Waste Electrical and Electronic Equipment): The product must be disposed of in European Union markets following specific waste collection and should never end up in rubbish bins
• Optimized Energy Efficiency: Energy efficient product
• Take-back: Take-back program available

Contractual warranty

Warranty 3 years repair or replace (excluding battery) and 2 years for battery

Recommended replacement(s)

Nov 16, 2023

FREQUENTLY ASKED QUESTIONS

What is the main input voltage supported by this UPS?

The main input voltage supported is 230 V and 400 V (3 phases). It also supports other input voltages like 220 V, 240 V, 380 V, and 415 V.

What is the main output voltage of this UPS?

The main output voltage is 230 V, and it also supports other output voltages like 220 V and 240 V.

What is the rated power of this UPS?

The rated power of this UPS is 10,000 Watts (10,000 VA).

What types of output connections does it have?

It has various output connections, including 6 IEC 60320 C13, 3 IEC Jumpers, and 4 IEC 60320 C19. Additionally, it has a hardwired 3-wire (H N + E) output connector.

How many rack units (U) does this UPS occupy?

This UPS occupies 6 rack units (6U) when mounted.

What is the battery type used in this UPS?

It uses a lead-acid battery.

How long does it take to recharge the batteries?

The battery recharge time is approximately 1.5 hours.

What is the expected battery life, and how many replacement batteries are included?

The battery life is estimated to be 3 to 5 years. Two replacement batteries (APCRBC140) are included.

Is this UPS suitable for high-density applications?

Yes, this UPS is designed for high-density applications.

Does it have a built-in network management card for monitoring?

Yes, it comes with a preinstalled network management card 3 with environmental monitoring.

What are the environmental operating conditions for this UPS?

The UPS operates at ambient air temperatures between 0°C and 40°C, with a relative humidity range of 0-95% (non-condensing). It can also operate at altitudes up to 10,000 ft.

Is it compatible with USB connections for management?

Yes, it is USB compatible.

DOWNLOAD THE PDF LINK:APC SRT10KRMXLI Smart-UPS SRT 10000VA Specification and Datasheet

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>