ANKER A2599 Mag Safe Charger 737 User Manual
- June 14, 2024
- Anker
Table of Contents
ANKER A2599 Mag Safe Charger 737 User Manual
Specifications
Adapter
Input | 100-240V~50/60HZ 1.0A |
---|---|
Output | 5.0V ⎓ 3.0A 15W/ 9.0V ⎓ 3.0A 27W/12.0V ⎓ 2.5A 30W |
Average Active Efficiency | 83.54% |
Efficiency at Low Load (10%) | 78.06% |
No-Load Power Consumption | 0.08W |
Wireless Charger
Input | 9V ⎓ 3A /12V ⎓ 2.5A / 15V ⎓ 2A |
---|---|
Output | 15W Max/ 5W Max/ 5W Max |
(iPhone:15W Max /Apple
Watch:5W Max / TWS: 5W Max)
Radiated H-Field| EU / UK Only:
-27.59dBuA/m@10m (for iPhone)
-30.46dBuA/m@10m (for Apple Watch)
-10.18dBuA/m @10m (for AirPods)
TX/RX Frequency Range| EU / UK Only:
For iPhone: 358.80-361.20kHz
For Apple Watch: 325.40-327.60kHz
For AirPods: 145.20-147.60KHz
Size| 115.5101105 mm
Weight| 385g
LED Indicator| Status
---|---
Solid blue for 3 seconds, then off| Connected to power
Solid blue| Charging true wireless earbuds
Flashing blue| At 1 Hz: Over-voltage or under-voltage protection activatedAt 2
Hz: Metal objects detected
- Connect the wireless charger to the included charger. Do not connect to a wall charger with an output lesser than 30W as it may affect the wireless charging function.
- This wireless charger is not compatible with non-MagSafe phone cases, such as OtterBox Defender cases.
- Using a thick protective case or a case with a magnetic/iron plate is not recommended as it may affect the wireless charging function.
- Do not place any foreign objects between your phone and the wireless charger’s surface, including metal pads on a car mount, credit cards, door keys, coins, metal, or NFC cards, as it may cause overheating.
- Do not connect the wireless charger to a 5V/1A wall charger or a USB port on a computer as it may affect the wireless charging function.
Input | iPhone | Apple Watch | TWS |
---|---|---|---|
18W | × | √ | √ |
20W | √ | × | × |
27W | √ | √ | × |
30W | √ | √ | √ |
Important Safety Instructions
Please refer to the electrical and safety information at the bottom before installing or operating the product.
- Avoid dropping.
- Do not disassemble.
- Do not expose to liquids.
- This product is suitable for moderate climates only.
- The maximum ambient temperature during the use of this product must not exceed 32-95 ℉ /0-35 °C.
- Open flame sources, such as candles, must not be placed on this product.
- Only use a dry cloth or brush to clean this product.
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult a dealer or an experienced radio/TV technician for help.
Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
FCC RF Exposure Statement
This equipment complies with FCC Radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated at a
minimum distance of 0.6ft / 20cm between the product and your body.
Product Name: Anker 737 MagGo Charger (3-in-1 Station)
Model: A2599
The following importer is the responsible party (for FCC matters only).
Company Name: Fantasia Trading LLC
Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764
Telephone: +1 800 988 7973
IC Warning Statement:
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
IC RF exposure statement:
This equipment complies with IC Radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 10cm between the product and your body.
This product complies with the radio interference requirements of the European Community
Declaration of Conformity
Hereby, Anker Innovations Limited declares that this product is in compliance with Directives 2014/53/EU & 2011/65/EU. The full text of the EU declaration of conformity is available at the following internet address: https://www.anker.com
To comply with RF exposure requirements, a minimum separation distance of 0.6ft / 20cm must be maintained between the user’s body and the product.
GB Declaration of Conformity
Hereby, Anker Innovations Limited declares that this product is in compliance with Radio Equipment Regulations 2017 and The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012. The full text of the GB declaration of conformity is available at the following internet address: https://www.anker.com
To comply with RF exposure requirements, a minimum separation distance of 20cm
must be maintained between the user’s body and the product.
Anker Innovations Limited
Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong
Anker Innovations Deutschland GmbH I Georg-Muche-Strasse 3, 80807 Munich, Germany
Anker Technology (UK) Limited I GNR8, 49 Clarendon Road, Watford, Hertfordshire, WD17 1HP, United Kingdom
Indoor use only
This symbol indicates that this product shall not be treated as household waste. Instead, it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment.
Customer Service
18-Month Limited Warranty
Lifetime Technical Support
@Anker
@Anker Japan
@Anker Deutschland
@AnkerOfficial
@Anker_JP
@anker_official
@anker_jp
support@anker.com
support.mea@anker.com (For Middle East and
Africa Only)
(US/CA) +1 (800)988 7973
(UK) +44 (0) 1604 936200
(DE) +49 (0) 69 9579 7960
(Middle East & Africa) +971 42428633
(UAE) +971 8000320817
(KSA)+966 8008500030
(Kuwait) +965 22069086
(Egypt) +20 8000000826
(AU) +61 3 8331 4800
(TR) +90 (850) 460 14 14
(RU) +8 (800) 511-86-23
(中国)+86 400 0550 036
(日本)03 4455 7823
(한국)+82 02-1670-7098
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>