Shadowspec Wall Mounted Umbrella Bracket User Guide
- June 16, 2024
- Shadowspec
Table of Contents
Shadowspec Wall Mounted Umbrella Bracket
Specifications: Wall Bracket
The Shadowspec Retreat Wall Bracket provides strength and easy installat on. Please note, there are two types of fixing holes on the bracket. One set is for affixing the bracket to the wall.The other set is to affix the umbrella to the bracket. These are indicated on the left-hand diagram and the umbrella holes are covered with silver stickers, which do not need to be removed. The holes allow for up to 8mm diameter screws or bolts. 18 gauge. These are sold separately. Please refer to the installation manual for detailed installation guides.
Umbrella Fixing
- Wall Fixing 1
- Wall Fixing 2
- Wall Fixing 3
- Wall Fixing 4
Dimensions
| Dimension
---|---
Umbrella Fixing 1| 95mm (4′)
Umbrella Fixing 2| 33mm (1 1/3”)
Umbrella Fixing 3| 110mm (4 1/3”)
Umbrella Fixing 4| 170mm (6 2/3”)
Wall Fixing 1| 526mm (1’9”)
Wall Fixing 2| 194mm (8”)
Wall Fixing 3| Wall Fixing 3
Wall Fixing 4| 19mm (3/4”)
Note: All sizings and conversions are +/- 2.5mm (2/32”) and are subject to change without notice. We recommend commercial installations use metric measurement for any umbrella spacing to ensure accuracy. The above dimensions make the assumption that you have installed your umbrella at the recommended installation height on your wall. If you have installed your retreat lower or higher than the recommendations, you will need to add that difference to he above measurements.
Product Usage Instructions
Installation
- Start by selecting a suitable location on your wall for mounting the Shadowspec Retreat Wall Mounted Umbrella.
- Ensure that the wall is strong enough to support the weight of the umbrella and can withstand wind loads.
- Using the provided screws or bolts, attach the wall bracket to the wall using the designated fixing holes.
- Make sure the bracket is securely fastened to the wall.
- Remove any silver stickers covering the umbrella fixing holes on the bracket if necessary.
- Place the umbrella onto the bracket, aligning the umbrella fixing holes with the corresponding holes on the bracket.
- Insert screws or bolts through the holes to affix the umbrella to the bracket.
- Tighten the screws or bolts securely to ensure the umbrella is firmly attached to the bracket.
Adjustment
The Shadowspec Retreat Wall Mounted Umbrella can be adjusted for optimal shade coverage. Follow these steps:
- To rotate the umbrella, hold the handle and gently turn it clockwise or counterclockwise.
- To tilt the umbrella, locate the tilt mechanism on the umbrella pole and adjust it to the desired angle.
- Test the rotation and tilt adjustments to ensure they are functioning properly and securely locked in place.
Frequently Asked Questions (FAQ)
Q: Are screws or bolts included with the wall bracket?
A: No, screws or bolts are sold separately. You can use up to 8mm diameter screws or bolts with 18 gauge.
Q: Can I install the umbrella at a different height than recommended?
A: Yes, you can install the umbrella at a different height. However, if you do so, you will need to adjust the above measurements accordingly by adding or subtracting the height difference.
Specifications
- The Shadowspec Retreat Wall Bracket provides strength and easy installation.
- Please note, that there are two types of fixing holes on the bracket.
- One set is for affixing the bracket to the wall
- The other set is to affix the umbrella to the bracket
- These are indicated on this left-hand diagram and the umbrella holes are covered with silver stickers and these stickers do not need to be removed.
- The holes allow for up to 8mm diameter screws or bolts. 18 gauge. These are sold separately.
- Please refer to the installation manual for detailed installation guides.
Note: All sizings and conversions are +/- 2.5mm / 2/32’’ and are subject
to change without notice.
We recommend commerical installations use metric measurement for any umbrella
spacing to ensure accuracy. The Above dimensions make the assumption that you
have installed your umbrella at the recommented installation height on your
wall. If you have installed your retreat lower or higher than the
recommendations you will need to add that difference to the above
measurements.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>