REP Fitness FT-5000 2.0 Functional Trainer Instruction Manual

REP Fitness FT-5000 2.0 Functional Trainer

Product Information

The product model is FT-5004. It is a troubleshooting guide for the product.

The issue being addressed in this guide is that the cables are not pre- installed. Additionally, it mentions that a 6mm Allen wrench and a 13mm wrench are not included with the product. The guide provides instructions on how to install the cable and shows an exploded view of a generic pulley.

It also highlights the importance of not losing the small pulley spacer.

Product Usage Instructions

1. Start by uninstalling the pulley.
2. Thread the cable through.
3. Reinstall the pulley.
4. Repeat steps 1-3 for all pulleys.
5. Repeat the process for the other frame.

Note: Make sure to use the appropriate wrenches and be careful not to lose the small pulley spacer.

Overview And Tools

Installation

INSTALL CABLE

TO INSTALL CABLE

1. UNINTSALL PULLEY
2. THREAD CABLE
3. REINSTALL PULLEY
4. REPEAT 1-3 FOR ALL PULLEYS
5. REPEAT FOR OTHER FRAME

NOTE: DO NOT LOSE SMALL PULLEY SPACER

NOTE:
DO NOT LOSE SMALL PULLEY SPACER

If you are missing any parts, or otherwise have any warranty issues, please file a warranty claim on our website:

WWW.REPFITNESS.COM.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>