denver LCO-551 Strip Light User Manual

denver LCO-551 Strip Light

Product Information

The light strip is a versatile product that can be used for various lighting purposes. It is designed to provide customizable and vibrant lighting effects to enhance the ambiance of any space. The light strip is easy to install and can be controlled using a compatible device or remote control.

Specifications

• Flashing Rate: Twice per second
• Configuration Mode: Enabled when the light strip flashes quickly

Product Usage Instructions

Step 1: Preparation

Ensure that you have the following items ready:

• The light strip
• A compatible device or remote control

Step 2: Entering Configuration Mode

To enter the configuration mode, follow these steps:

1. Make sure the light strip is powered on.
2. If the light strip is not flashing quickly, turn the product switch on and off three times in the following sequence: on-off-on-off-on.
3. Once the light strip starts flashing quickly, it indicates that it is in configuration mode.

Step 3: Connecting the Light Strip

To connect the light strip to your device, proceed as follows:

1. Open the “Add Device” page on your device’s app or interface.
2. Tap the “Confirm” button when the light strip’s rapid blinking is observed.
3. Wait for the connection to be established. This may take a few seconds.

Step 4: Customizing Lighting Effects

Once the light strip is successfully connected, you can customize the lighting effects according to your preferences using the app or remote control.

Frequently Asked Questions

Q: What should I do if the light strip is not flashing quickly?

A: If the light strip is not flashing quickly, try turning the product switch on and off three times (on-off-on-off-on) until it starts flashing rapidly. This will activate the configuration mode.

Q: Can I control multiple light strips with one device?

A: Yes, you can control multiple light strips with one device as long as they are connected to the same network and configured properly.

Q: Can I cut the light strip to fit my desired length?

A: No, cutting the light strip may damage it and void the warranty. It is recommended to use the entire length of the light strip or consult the product manual for alternative solutions.

facebook.com/denver.eu

Denver Smart Home

Lighting product instructions for use Universal Edition Denver Smart Home App

Safety information

Please read the safety instructions carefully before using the product for the first time and keep the instructions for future reference.

1. This product is not a toy. Keep it out of reach of children.
2. Keep product out of the reach of children and pets to avoid chewing and swallowing.
3. Product operating and storage temperature is from -20 degree Celsius to 40 degree Celsius. Under and over this temperature might affect the function.
4. Never open the product. Touching the inside electrics can cause electric shock. Repairs or service should only be performed by qualified personnel.
5. Only charge with the original adapter supplied with this product!
6. Only use with the attached accessories. Using non original accessories can make the product work abnormal.
7. The direct plug-in adapter is used as disconnect device, the disconnect device shall remain readily operable. So, make sure there is space around the power outlet for easy access. Do not expose to heat, water, moisture, direct sunlight!

Preparation for use

1. Power on the lamp while ensuring that your smartphone is connected to the 2.4 GHz Wi-Fi network;
2. Download and open the app.
3. Search for”Denver Smart Home”in the App Store or scan the QR code below or on the package to download and install the app.
4. Tap the”Register”button to register if you download it for the first time.If you already have an account,tap the”Login”button.

Device Network configuration

1. Open the Denver Smart Home app and access the”Devices”page.Tap the”+”mark in the upper right comer of the page.
2. Select”Lighting devices”on the device list page.
3. Ensure the light strip flashes quickly (twice a second). This indicates that the light strip is in configuration mode. If it isn’t flashing, then turn the product switch on and off 3 times(on-offon-off-on) until the light flashes quickly. Tap the “confirm light blinks rapidly” button on the “add device” page to start connection.

ALL RIGHTS RESER.VBD, COPYltlGHT DENVBR.A/S

Electric and electronic equipment contains materials, components and substances that can be hazardous to your health and the environment, if the waste material (discarded electric and electronic equipment) is not handled correctly.
Electric and electronic equipment is marked with the crossed out trash can symbol, seen above. This symbol signifies that electric and electronic equipment should not be disposed of with other household waste, but should be disposed of separately.
All cities have established collection points, where electric and electronic equipment can either be submitted free of charge at recycling stations and other collection sites, or be collected from the households. Additional information is available at the technical department of your city.
Hereby, Denver A/S declares that the radio equipment type LCO-551 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: denver.eu and then click the search ICON on topline of website. Write model number: LCO-551. Now enter product page, and red directive is found under downloads/other downloads.

Wi-FI lamp control gears:
Operating Frequency Range: 2412-2472MHz
Maximum radio frequency power: 18.41 dBm
DENVER A/S
Omega 5A, Soften
DK-8382 Hinnerup
Denmark
www.facebook.com/denver.eu.

Nordics

Headquarter
Denver A/S Omega 5A, Soften DK-8382 Hinnerup Denmark
Phone: +45 86 22 51 00
(Push “2” for support)

E-Mail
For technical questions, please
write to: support@denver.eu
For all other questions please write to: denver@denver.eu

Benelux/France
Denver Benelux BV Barwoutswaarder 13C+D 3449 HE Woerden The Netherlands
Phone: +31 348 420 029
E-Mail: support-nk@denver.cu

Germany

Denver Germany GmbH Service
Gutenbergstrasse 1 94036 Passan
Phone: +49 851 379 369 40

E-Mail
Repair-germany@denver.eu

Fairfixx GmbH
Repair and service Rudolf-Diesel-Str. 3 TOR 2 53859 Niederkassel (for TV, E-Mobility/Hoverboards/Balanceboards, Smartphones & Tablets)
Tel.: +49 851 379 369 69
E-Mail: denver@fairfixx.de

Austria

Lurf Premium Service GmbH
Deutschstrasse I 1230 Wien
Phone: +43 1 904 3085
E-Mail: denver@lurfservice.at

Spain/Portugal

Denver AS Spain S.A C/ Moseú, 1 Pol.Ind.Mas de Tous 46185 La Pobla de Vallbona Valencia (Spain) Spain
Phone: +34 960 046 883
Mail: serviciotecnico.denver@denver.cu

Portugal:

Phone: +35 1255 240 294
E-Mail: denver.service@satfiel.com

Denver A/S
Omega 5A, Soeften DK-8382 Hinnerup Denmark
Denver.eu

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>