Bousnic pcollar 670 Dog Training Collar with Remote User Guide

Bousnic pcollar 670 Dog Training Collar with Remote

Product Information

Specifications

• Brand: Bousnic
• Product: Dog Training Collar
• Model: E-Collar
• Stimulation Levels: 1 to 16 (depending on the model)
• Communication: Remote Trainer

Introduction:
The Bousnic Dog Training Collar is a powerful tool for encouraging desired behavior in your dog. It provides instant feedback and improves communication during training, leading to off-leash reliability. This method of training is gentle and effective, reducing confusion and accelerating learning.

Benefits:

• Gentle and effective training method
• Instant feedback for better communication
• Reduces confusion and fosters positive training attitude
• Accelerates learning and produces off-leash reliability

Product Usage Instructions

Step 1: Finding the Best Stimulation Level for Your Pet. It is important to start with the vibration mode first and use the static shock mode as a last resort. Follow the steps below to find the best stimulation level for your pet:

1. Start at the lowest level of stimulation on the Remote Display.
2. Press the Vibration or Shock Stimulation Button continuously.
3. If your pet shows no reaction, repeat the stimulation level several times before moving up to the next level.
4. Ensure that your pet does not bark or panic when receiving stimulation. If this happens, the stimulation level is too high, and you need to go back to the previous level and repeat the process.
5. Continue moving up through the stimulation levels until your pet reliably responds to the stimulation.
6. If your pet continues to show no response at the highest level, check the fit of the Receiver Collar. If your pet has long or thick fur, use the longer set of Contact Points. Then, repeat the process from step 1.
7. If your pet still does not respond, consider trimming the hair around the Contact Points.

Step 2: Teaching Basic Obedience
Before using the Bousnic collar for training at a distance, it is important for your dog to learn how to respond to the e-collar for each command. Follow the procedures given even if your dog already knows the basic obedience commands. The following commands  are covered:

The Sit Command:
Teach your dog to sit on command using the e-collar. Use a combination of verbal cues and e-collar stimulation to reinforce the command.

The Come Command:
Teach your dog to come when called using the e-collar. Start in a controlled environment and gradually increase distractions while reinforcing the command with e-collar stimulation.

The Stay Command:
Teach your dog to stay in place using the e-collar. Start with short durations and gradually increase the time while reinforcing the command with e-collar stimulation.

Step 3: Eliminating Unwanted Behavior
The Bousnic collar can also be used to eliminate unwanted behaviors such as jumping up, digging, chasing, and trash raiding. Follow these general tips for effective behavior correction:

• Identify the specific unwanted behavior.
• Use the e-collar to interrupt the behavior with appropriate stimulation.
• Redirect your dog’s attention to an alternative behavior or command.
• Consistently reinforce the desired behavior and discourage the unwanted behavior.

Frequently Asked Questions (FAQ):

How many stimulation levels does the Bousnic Dog Training Collar have?
The Bousnic Dog Training Collar can have anywhere from 1 to 16 different stimulation levels, depending on the model.

Can I start with the static shock mode?
It is recommended to start with the vibration mode first and use the static shock mode as a last resort.

What should I do if my pet panics or barks when receiving stimulation?
If your pet panics or barks when receiving stimulation, it indicates that the stimulation level is too high. You should go back to the previous level and repeat the process.

My pet is not responding to the highest stimulation level. What should I do?
If your pet does not respond to the highest stimulation level, check the fit of the Receiver Collar. If your pet has long or thick fur, use the longer set of Contact Points. If there is still no response, consider trimming the hair around the Contact Points.

Dog Training Collar Introduction
Whether training a companion, working, or sport dog, we all want a happy and willing puppy that responds quickly to commands at a distance and under distraction. Your new Bousnic collar is a powerful training tool that can help you reach that goal. Bousnic electronic training collar (e-collar) is a safe, reliable, and effective training tool. With it, you can make perfectly timed corrections even at great distances. In addition, the adjustable intensity feature allows you to match the stimulation of the training collar to your dog’s temperament and the distraction level of the moment for maximum training efficiency. However, correcting to stop unwanted behavior is only a fraction of what you can do with your e-collar. Here is an example of a dog training collar that consists of the Remote Transmitter and Receiver Collar:

Bousnic e-collar can be a powerful tool for encouraging desired behavior. But first, you must identify an e-collar intensity setting for your dog that is high enough to be noticed but not so high as to be disruptive. Then, your dog must learn to act in response to the e-collar and that he can, by his actions, control it. You will find this method of e-collar training is even gentler than many traditional leash-training methods. Additionally, the e-collar improves communication by providing instant feedback to your dog during training. This reduces confusion, fosters a positive training attitude, and accelerates learning, rapidly producing off-leash reliability. Even if your dog already knows the basic obedience commands, follow the procedures given. Your dog must learn how to respond to the e-collar for each command before you can use your Bousnic collar for training at a distance.

Important : Start with the vibration mode first & use the static shock mode as a last resort. Based on the model, the Remote Trainer can have anywhere from 1 to 16 different stimulation levels. This allows you to choose the level that is best for your pet. Once you have placed the Receiver Collar on your pet, it is time to find the Stimulation Level that is best for him. This is called the Recognition Level. A slight change in your pet’s behavior, such as looking around in curiosity, scratching at his collar, or flicking his ears, indicates the Recognition Level that is best for him.

Follow the steps below to find your pet’s Recognition Level:

1. Starting at the Lowest Level of stimulation on the Remote Display, press the Vibration or Shock Stimulation Button continuously (further referred to as a [S] button).
2. If your pet shows no reaction, repeat the Stimulation Level several times before moving up to the next level.
3. YOUR PET SHOULD NOT BARK OR PANIC WHEN RECEIVING STIMULATION. IF THIS HAPPENS, THE STIMULATION LEVEL IS TOO HIGH AND YOU NEED TO GO BACK TO THE PREVIOUS LEVEL AND REPEAT THE PROCESS.
4. Move up through the Stimulation Levels until your pet reliably responds to the stimulation.
5. If your pet continues to show no response at the Highest Level, check the fit of the Receiver Collar. If your pet has long or thick fur, use the longer set of Contact Points. Then go back to step 1 and repeat the process. If this still does not yield any results, your pet’s hair will need to be trimmed around the Contact Points.

Teaching Basic Obedience

The “Sit” Command

1. Put a separate, non-metallic collar on your pet’s neck ABOVE the Receiver Collar, and attach a 10-foot leash. Note: Be sure the extra collar does not put pressure on the Contact Points.
2. Hold the leash and the Remote Transmitter in one hand. Keep your other hand free to guide your pet into a “Sit” position.
3. Press and hold the [S] Button, starting at your pet’s Recognition Level.
4. Immediately give the “Sit” command while continuing to hold the [S] Button.
5. Release the [S] Button as soon as your pet is in position, and praise him.
6. Release your pet from the “Sit” command and play.
7. Repeat Steps 2 through 6.

Note : If your pet breaks the “Sit” command, repeat steps 3 through 6. Keep your pet close to you while teaching the “Sit” command.

The “Come” Command

1. Put a separate, non-metallic collar on your pet’s neck ABOVE the Receiver Collar, and attach a 10-foot leash.
   • Note : Be sure the extra collar does not put pressure on the Contact Points.
2. Hold your leash in one hand and the Remote Transmitter in the other.
3. Wait for your pet to walk away from you. Using the Recognition Level for your pet, press and hold the [S] Button on your Remote.
4. Immediately give the command “Come” while continuing to hold the [S] Button.
5. Using the leash, gently guide your pet toward you until he begins to come in your direction.
6.  Immediately release the [S] Button as soon as your pet steps towards you, and praise him enthusiastically.
7. Quickly move backward as your pet begins to come back to you, praising him the entire time.
8. Praise your pet when he returns to you.
9. Repeat Steps 3 through 8.
10. Once your pet responds readily to the “Come” command several times, back away from him without giving a command. When your pet turns toward you, give the “Come” command (WITHOUT STIMULATION) and praise him while you continue to back up. Praise your pet when he returns to you.
11. Use your leash to prevent your pet from running past you. If your pet manages to run\ past you, repeat Steps 3 through 8.

The “Stay” Command

1. Put a separate, non-metallic collar on your pet’s neck ABOVE the Receiver Collar, and attach a 10-foot leash.
   • Note : Be sure the extra collar does not put pressure on the Contact Points.
2. Put your pet on his bed or a cooling mat. Hold your leash in one hand and the Remote Transmitter in the other.
3. Staying within 3 feet, walk the perimeter of the bed. Do not say anything to your pet.
4. If your pet tries to leave the bed, press and hold the [S] Button and give the “Stay” command. Continue to hold the button until your pet is back on his bed. If necessary, use the leash to guide your pet onto his place.
5. Praise your pet when he is back on his bed. You are welcome to use treats.
6. Once your pet has settled for a few seconds, release him and play calmly.
7. Repeat steps 1 through 5.

Eliminating Unwanted Behavior

Jumping Up
Pets typically jump up to get attention. If you do not want your pet to jump on you, then friends or members of the family should not encourage this behavior. That means every time your pet jumps on someone, he should be reprimanded or redirected to an alternate and acceptable behavior, for which he can receive praise.

Note : It is best if your pet first understands the “Sit” command.

1. Choose your pet’s Recognition Level.
2. As soon as your pet lifts his paws off the ground to jump on you, press the [S] Button and give the command “Sit.”
   • Release the [S] Button immediately once your pet is sitting, and verbally praise him.
   • If your pet ignores the stimulation, increase the Intensity Level.
   • Practice this exercise in several different areas and use different people for distractions.

Digging
It is important to first understand why your pet is digging. Many dogs, such as terriers, were bred to flush out prey, and digging is very natural to them. Other dogs may be digging to find a cool spot to lay down, or simply out of boredom. Your pet may no longer have the desire to dig if he is provided with the following:

• A cool, shaded area in which to lay down, and plenty of water.
• An alternate activity, such as a favorite toy.
• Plenty of play, exercise, and attention.
• A yard free from rodents or prey that your dog may be trying to find.

1. Choose the Intensity Level 1 higher than your pet’s Recognition Level.
2. Place the Receiver Collar on your pet and wait at least 10 minutes before placing him in the yard. No other people or pets should be in the yard, as you do not want your pet to associate the stimulation with anything other than his digging. Your pet must be securely fenced in or contained during training.
3. From a window or area where your pet cannot see you, wait until your pet begins to dig.
4. While your pet digs, press the [S] Button and release it when he stops digging. Only press the button while your pet is in the act of digging, and do not say anything to him.
5. If your pet ignores the stimulation, increase the Intensity Level.
6. Continue to watch your pet, as he may choose another area to dig.
7. Do not allow your pet in the yard unsupervised until he has completely stopped digging.

Chasing
Chasing is an instinctive behavior stimulated by moving objects. Some dogs have a particularly strong desire to chase that can put them in harm’s way and leave you helpless. Never allow your dog off the leash or out of a contained area until he has learned the “Come” command, regardless of the distraction. Be consistent and correct your dog every time he chases something.

CAUTION! It is vitally important that you and your dog remain safe while learning during on-leash training. Your dog should be on a strong leash, long enough for him to attempt to chase an object, but short enough for him not to reach a road or other unsafe area. You must also be physically strong to restrain your dog when he tries to chase.

1. If your dog has not learned the “Come” command, keep a leash on him so you can physically stop him before he reaches the object he is chasing.
2. Choose the Intensity Level 1 higher than your dog’s Recognition Level.
3. Set up a scenario where your dog is enticed to chase an object. Common items could be cars, motorcycles, bicycles, etc. (do not use toys).
4. When the object passes in front of your dog, make sure to hold the leash with a firm grip. As soon as your dog begins to chase the object, press and hold the [S] Button until he stops.
5. When your dog stops chasing the object, immediately release the button, walk backward, and give the “Come” command. Praise your dog as he comes to you.
6. Repeat the process until your dog stops chasing the object.

Trash Raiding
The easiest way to prevent trash raiding is to remove garbage and tempting food from your pet’s environment. You can use the Remote Trainer to teach your pet to stay away from these items; however, you must be prepared to correct your pet every time he approaches them.

1. Choose the Intensity Level 1 higher than your pet’s Recognition Level.
2. Pick a temptation for your pet and position yourself where he cannot see you.
3. While your pet’s mouth is touching the temptation, press and hold the [S] Button. Immediately release the button when your pet leaves the temptation.
4. Do not say anything, as you want your pet to associate the stimulation with his behavior, not you.
5. If your pet does not respond to the stimulation, increase the Intensity Level by 1 and repeat the process.
6. Repeat this process in several different locations with different temptations.

General Tips

• Bousnic Dog Training Collar is not designed to be worn constantly. We recommend you limit collar usage just for active Training Sessions. Always take off the collar when you leave your dog unattended.
• Most dogs will feel uncomfortable when wearing a collar for the first time. Don’t use any commands until your dog has gotten used to the collar which will normally take several days.
• Eliminate one unwanted action or teach one obedience command at a time. If you move too quickly with training, your dog may become confused.
• Be consistent in your training. Give your dog the same stimulation for each unwanted action. We suggest you use Vibration Stimulation before starting the Static Shock Stimulation. If you follow this training method, your dog will learn that Static Shock Stimulation might come after Vibration. Hence, the Vibration Stimulation alone can effectively cure unwanted behavior of your dog.
• Do not overcorrect. Use as little stimulation as possible to train your dog.
• Following a predefined scenario in all Training Sessions can dramatically improve your chances of success.
• Should your dog react to the training by hiding or reacting fearfully, redirect his attention to a simple command such as “Speak” or “Sit” to calm him down. Use treats to help your dog understand what commands have been done correctly.

Terms of Use and Limitation of Liability

Terms of Use
This Product is designed to be used with dogs where training is desired. The specific temperament of your dog may not work with the product. We do not recommend you to use this product if your pet is less than 8 lbs or under 6 months old, or if your pet is aggressive. If you are unsure whether this is appropriate for your pet, please consult your veterinarian or a certified trainer. Proper use includes reviewing the entire User Manual and Dog Training Guide provided with the product. Pay extra attention to all Caution statements.

No Unlawful or Prohibited Use
This Product is designed for use with dogs only. Bousnic dog training collar is not intended to harm, injure, or provoke. Using this product in a way that is not intended could result in a violation of Federal, State, or local laws.

Limitation of Liability
In no event shall we be liable for any direct, indirect, punitive, incidental, special, or consequential damages, or any damages whatsoever arising out of or connected with the use or misuse of this Product. Buyer assumes all risks and liability from the use of this Product.

Modification of Terms and Conditions
We reserve the right to change the terms, conditions, and notices under which this Product is offered.

Troubleshooting

No shock function /My pet does not respond when I press a button

1. Make sure the Contact points or the Contact Spring Sheet is in contact with the dog’s skin and not blocked by hair.
2. Make sure the Receiver Collar has been turned on.
3. If the range has reduced from the first time you used the Remote Training Collar, the battery(s) may be low in either the Remote or Receiver Collar.
4. The distance between the transmitter and the receiver is too far, or blocked by metal objects.
5. Test the Receiver Collar. Refer to “Function Test” for details.
6. Increase the Shock Level. Maybe the level is too low for the dog to feel.

The Receiver Collar will not turn on

1. Make sure the Receiver Collar has been charged. For the initial charge, be sure to charge it for 4 hours. Subsequent charges only take 2-3 hours.
2. Check if your receiver can take charge. Well plugged in the charger, see if the red light on the receiver comes out or turns to green. If the red light doesn’t come out or turn to green, contact the support team.
3. Try different outlets or chargers to check if the charging device is workable. 4. If the receiver can be charged normally, help confirm if you can hear the click when the button is pushed.

The Receiver Collar is not responding to the Remote

1. Make sure the Receiver Collar is on.
2. If the Indicator Light does not come on when any button is pressed on the remote, ensure that the remote is on and has enough batteries.
3. If the first two solutions did not resolve your problem, Refer to”Pair the Remote and the Receiver Collar”.

The Receiver Collar or The Remote cannot be charged.

1. Check if the output voltage of the adapter or USB port to which the charging cable is connected is 5V. For safety, the device won’t take charge when the voltage is higher than 5V.
2. Check if there is dirt or rust in the charging hole, try to clean it.
3. Make sure that the charger and charging cable are not damaged or broken.
4. If the battery is completely consumed and the device is stored for too long, when recharging, it will take a few more minutes before the decisive displays the charging status.
5. When the temperature is below 0 degrees Celsius, the charging speed will be slower.

Customer satisfaction is always our top priority. Any issues, please feel free to contact us at any time. We will help you at our best. Take care and have a good day!

@Bousnic

support@bousnic.com

Frequently Asked Questions

Is the static safe for my pet?

The static electricity of this collar is safe for your pet, please feel safe. Please select the appropriate static electricity level.Electronic training equipment requires the interaction and training of the owner.

How old does my pet have to be before using the electronic training collar?

Your pet should be able to recognize basic obedience commands such as Sit or Stay.Pets should be at least 6 months old before using the training collar.

Once my pet is trained and has been obeying my commands, will he have to continue to wear the receiver collar?

It is recommended to wear it until you completely correct the dog's bad behavior.

Is the receiver collar waterproof?

Yes, the receiver collar is IPX7 waterproof. But the remote is not waterproof. Please keep the remote away from the water.

WillI get exactly 1000 feet of range with the electronic training collar?

The effective wireless communication range will be affected by terrain, weather, vegetation, and interference from other radio equipment.

Once my pet is trained does he have to continue to wear the collar?

You might have to reinforce training with the collar from time to time.

How long can I continuously deliver Vibration or Static Shock to my pet?

The max amount of time you can deliver the Vibration or Static Shock to you dog continuously should be no more than 10 seconds. IMPORTANT While it is fine to use the Vibration for up to 10 seconds, it is highly recommended to limit the continuous Static Shock delivery to no more than 3 seconds the smaller the dog the shorter it should be.

What should I do if my dog’s neck becomes red and irritated?

Stop using the product immediately for at least 48 hours. If the condition persists beyond 48 hour please consult your veterinarian.

Can I attach a leash to the Receiver collar?

No, this can result in pulling the contact points to tightly against your dog’s neck. Use a separate collar when needed.

How long can I leave a Receiver Collar on my dog?

The Collar is not design to be worn continuously. We recommend the Collar to be worn only during training sessions or other outdoor activities.

How long should the training session be?

Training sessions should be kept short and positive 10-15 minutes.

How can I get support when I have product problems?
Please feel free to contact our official customer service mailbox, any problems with the product will be resolved here: support@bousnic.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>