ViewSonic VA2432-H 24 Inch 1080p IPS Monitor User Guide

: June 14, 2024
: Viewsonic

ViewSonic VA2432-H 24 Inch 1080p IPS Monitor

ViewSonic VA2432-H 24 Inch 1080p IPS Monitor-fig-1

Product Information

Specifications

Model No.: VS17789
P/N : VA2432-H | VA2432-MH
Hole pattern (W x H): 75 x 75 mm
Interface Pad (W x H x D): Pad Hole
Screw Specification: Screw Quantity 4 pieces
VESA wall mounting hole

Product Overview
The VA2432-h and VA2432-mh are display monitors designed to provide high- quality visuals and a comfortable viewing experience. The monitors come with a stand for desktop use and can also be wall-mounted using the VESA wall mounting hole.

Front and Rear View
The front of the monitor features a slim bezel design with a high- resolution display. The rear of the monitor houses the I/O ports and the VESA wall mounting hole.

I/O Ports
The I/O ports on the monitor include:

Power input port
HDMI port
VGA port
Audio input/output ports

Product Usage Instructions

Initial Setup

Start by unpacking the monitor and its components.
If you plan to use the stand, attach it to the monitor by aligning the stand’s connector with the slot on the monitor and pushing it gently until it clicks into place.
If you prefer to wall mount the monitor, use the VESA wall mounting hole and follow the instructions provided in the wall mounting section.

Making Connections

Connect the power cable to the power input port on the monitor and plug the other end into a power outlet.
If you’re using an external device such as a computer or gaming console, connect it to the monitor using the appropriate cables (HDMI or VGA).
If you want to use audio, connect your headphones or speakers to the audio output port on the monitor. You can also connect an audio source to the audio input port if needed.

Using the Monitor

Adjusting the Viewing Angle
To adjust the viewing angle of the monitor:

Hold the edges of the monitor firmly with both hands.
Gently tilt the monitor forward or backward to achieve your desired viewing angle.

Turning the Device On/Off
To turn on/off the monitor:

Press the power button located on the front or side of the monitor.

Quick Menu
The quick menu allows you to access commonly used settings quickly. Press the menu button on the monitor to open the quick menu, then use the navigation buttons to select and adjust settings such as brightness, contrast, and color temperature.

Hot Keys
The monitor also features hot keys for quick access to specific functions. Refer to the manual for a detailed explanation of each hot key’s functionality.

Configuring the Settings
You can further configure the monitor’s settings using the on-screen display (OSD) menu. The OSD menu allows you to adjust various settings such as picture mode, input source, and audio settings. Refer to the OSD menu tree in the manual for a complete list of available settings.

FAQ

Can I use this monitor with a Mac computer?
Yes, this monitor is compatible with Mac computers. Simply connect your Mac to the monitor using the appropriate cables (HDMI or VGA).

Can I mount this monitor on any wall?
The monitor can be wall-mounted using the VESA wall mounting hole. Make sure to follow the instructions provided in the wall mounting section of the manual for proper installation.

How do I clean the monitor?
To clean the monitor, use a soft, lint-free cloth lightly dampened with water. Avoid using harsh chemicals or abrasive cleaners as they may damage the screen or the monitor’s surface.

Thank you for choosing ViewSonic®
As a world-leading provider of visual solutions, ViewSonic® is dedicated to exceeding the world’s expectations for technological evolution, innovation, and simplicity. At ViewSonic®, we believe that our products have the potential to make a positive impact in the world, and we are confident that the ViewSonic® product you have chosen will serve you well.
Once again, thank you for choosing ViewSonic®!

Safety Precautions

Read these instructions completely before using the equipment.
Keep these instructions in a safe place.
Heed all warnings and follow all instructions.
Sit at least 18” / 45 cm from the monitor.
When installing the monitor, please leave 4” / 10 cm of open space around the monitor for ventilation safety purposes.
Always handle the display with care when moving it.
Always use cabinets or stands or installation methods recommended by the manufacturer of the monitor set.
Always use furniture that can safely support the monitor.
Always ensure the monitor is not overhanging the edge of the supporting furniture.
Do not place the monitor where children are likely to be present.
Always educate children about the dangers of climbing on furniture to reach the monitor or related equipment.
Always route and manage cords and cables connected to your monitor so they cannot be tripped over, pulled, or grabbed.
Exercise caution when removing the rear cover of the monitor. This monitor contains high-voltage parts.
Do not use this equipment near water. To reduce the risk of fire or electric shock, do not expose the monitor to rain or moisture.
Avoid exposing the monitor to direct sunlight or other sources of sustained heat. Do not install near any heat sources such as radiators, heat registers, stoves, or other devices (including amplifiers) that may increase the temperature of the monitor to dangerous levels.
Clean with a soft, dry cloth. If further cleaning is required, see the “Maintenance” section in this guide for further instructions.
Avoid touching the screen. Skin oils are difficult to remove.
Do not touch, rub, or apply pressure to the monitor screen, as it may permanently damage the screen.
Do not place the monitor in an unstable location.
Do not place the monitor on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and the monitor to a suitable support.
Do not place the monitor on cloth or other materials that may be located between the product and supporting furniture.
Place the monitor in a well-ventilated area. Do not place anything on the display that prevents heat dissipation.
Do not place heavy objects on the display, video cable, or power cord.
Do not place items that might tempt children to climb, such as toys and remote controls, on the top of the monitor or furniture on which the product is placed.
If smoke appears, an abnormal noise, or a strange odor is present, immediately switch the display off and contact your dealer or ViewSonic. It is dangerous to continue using the display.
Do not attempt to circumvent the safety provisions of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade and the third prong are provided for your safety. If the plug does not fit into your outlet, obtain an adaptor and do not attempt to force the plug into the outlet.
Please confirm the distribution system installed in the building. The system should provide a circuit breaker rated at 120/240V, 20A.
When connecting to a power outlet, DO NOT remove the grounding prong. Please ensure grounding prongs are NEVER REMOVED.
Protect the power cord from being treaded upon or pinched, particularly at the plug, and at the point where it emerges from the equipment. Be sure that the power outlet is located near the equipment so that it is easily accessible.
Only use attachments/accessories specified by the manufacturer.
Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the equipment. When a cart is used, use with caution when moving the cart/equipment combination to avoid injury from tipping over.
Unplug this equipment when it will be unused for long periods of time.
Refer all servicing to qualified service personnel. Service will be required when the unit has been damaged in any way, such as: if the power-supply cord or plug is damaged, if liquid is spilled onto or objects fall into the unit, if the unit is exposed to rain or moisture, or if the unit does not operate normally or has been dropped.
Excessive sound volume from ear-/headphones may cause hearing damage/hearing loss.
Adjustment of the volume control as well as the equalizer may increase the ear-/headphones output voltage and therefore, the sound volume level.
The factors influencing the ear-/headphones output other than those specified by the manufacturer (e.g. operating system, equalizer software, firmware, driver) may increase the ear-/headphone output voltage and therefore, the sound volume level.
Stability Hazard: The display may fall, causing serious personal injury or death. To prevent injury, this display must be securely attached to the floor/wall in accordance with the installation instructions.
Fastening the monitor to a wall or fixed object using cordage or other restraining devices can help support the weight of the monitor in order to prevent the monitor from falling over.
NOTE:
- Restraining device/cordage should be able to withstand 100N force.
- Make sure the cordage is straightened, and any slack is removed. The back of the device shall face the wall to ensure the device cannot tilt under external force.
- Make sure the monitor does not tilt under external force at any height and rotation angle of the device.
If the existing monitor is going to be retained and relocated, the same considerations as above should be applied.

Introduction

Package Contents

Monitor
Power cord
Power adapter
Video cable
Quick start guide
NOTE: The power cord and video cables included in your package may vary depending on your country. Please contact your local reseller for more information.

Product Overview

Front and Rear View

I/O Ports

ViewSonic VA2432-H 24 Inch 1080p IPS Monitor-fig-4

HDMI
VGA
Audio Out
DC IN

Initial Setup

Installing the Stand

NOTE: Always place the device on a flat, stable surface. Failure to do so may cause the device to fall and damage the device and/or result in personal injury.

Wall Mounting
NOTE: Only use UL Certified wall mount kits.

Refer to the table below for the standard dimensions for wall mount kits.

ViewSonic VA2432-H 24 Inch 1080p IPS Monitor-fig-8

NOTE: Wall mount kits are sold separately. To obtain a wall mounting kit, contact ViewSonic® or your local dealer.

Turn off the device and disconnect all cables.
Place the device on a flat, stable surface with the screen facing down.
Remove the monitor stand.
Attach the mounting bracket to the VESA mounting holes at the rear of the device. Then secure it with four (4) screws (M4 x 10 mm).
Follow the instructions that come with the wall mounting kit to mount the monitor onto the wall.

Using the Security Slot

To help prevent the device from being stolen, use a security slot locking device to secure the device to a fixed object.
Additionally, fastening the monitor to a wall or fixed object using a security cable can help support the weight of the monitor in order to prevent the monitor from falling over.
Below is an example of setting up a security slot locking device on a table.

Making Connections

This section guides you on how to connect the monitor with other equipment.

Connecting to Power

Connect the power cord to the DC IN jack at the rear of the device.
Plug in the power cord to a power outlet.

Connecting External Devices

Using the Monitor

Adjusting the Viewing Angle

Tilt Angle Adjustment
Tilt the monitor forwards or backwards to the desired viewing angle (-5˚ to 20˚).

NOTE: When adjusting, support the stand firmly with one hand while tilting the monitor forwards or backwards with the other hand.

Turning the Device On/Off

Plug the power cord into a power outlet.
Press the Power button to turn on the monitor.
To turn the monitor off, press the Power button again.
NOTE: The monitor will still consume some power as long as the power cord is connected to the power outlet. If the monitor is not being used for a long period of time, please disconnect the power plug from the power outlet.

Using the Control Panel Keys
Use the control panel keys to access the Quick Menu, activate Hot Keys, navigate the On-Screen Display (OSD) Menu, and change the settings.

ViewSonic VA2432-H 24 Inch 1080p IPS Monitor-fig-15

Quick Menu
Press the 1(«) to activate the Quick Menu.

NOTE: Follow the key guide that appears on the screen to select the option or make adjustments.

ViewSonic VA2432-H 24 Inch 1080p IPS Monitor-fig-17

Hot Keys
When the On-Screen Display (OSD) Menu is off, you can quickly access special functions by using the Joy Key.

ViewSonic VA2432-H 24 Inch 1080p IPS Monitor-fig-18

Configuring the Settings

General Operations

Press the 2/3/4 key to display the On-Screen Display (OSD) Menu.
Press the 1(«) or 2 key to select the main menu. Then press the 3 key to enter the selected menu.
Press the 1(«) or 2 key to select the desired menu option. Then press the 3 key to enter the sub-menu.
Press the 1(«) or 2 key to adjust/select the setting. Then press the 3 key to confirm.
NOTE: Certain menu option adjustments do not require the user to press the 3 key to confirm the selection. Follow the key guide that appears on the bottom of the screen to select the option or make adjustments.
Press the 4 key to return to the previous menu.
NOTE: To exit the OSD Menu, press the 5( ) key.

On-Screen Display (OSD) Menu Tree

ViewSonic VA2432-H 24 Inch 1080p IPS Monitor-fig-24

Appendix

Specifications

ViewSonic VA2432-H 24 Inch 1080p IPS Monitor-fig-28

Do not set the graphics card in your computer to exceed these timing modes; doing so may result in permanent damage to the display.
Please use the power cord from ViewSonic® or an authorized source only.
The test condition follows EEI standards.

Glossary

This section describes the standard glossary of terms used in all LCD display models.
All terms are listed in alphabetical order.
NOTE: Some terms may not be applicable to your monitor.

A
- Advanced DCR
  Advanced DCR technology automatically detects the image signal and intelligently controls the backlight brightness and color to improve on the ability to make the black blacker in a dark scene, and make the white whiter in a bright environment.
- Audio Adjust
  Adjusts the volume, mutes the sound, or toggles between inputs if you have more than one source.
- Auto Detect
  If the current input source has no signal, the monitor will automatically switch to the next input option. This function, on some models, is disabled by default.
- Auto Image Adjust
  Automatically sizes, centers, and fine tunes the video signal to eliminate waviness and distortion.
B
- Blue Light Filter
  Adjusts the filter that blocks high-energy blue light for a more comfortable viewing experience.
- Brightness
  Adjusts background black levels of the screen image.
C
- Color Adjust
  Provides several color adjustment modes, to help adjust the color settings to fit the user’s needs.
- Color Space
  Allows users to choose which color space they would like to use for monitor color output (RGB, YUV).
- Color Temperature
  Allows users to select specific color temperature settings to further customize their viewing experience.
- Contrast
  Adjusts the difference between the image background (black level) and the foreground (white level).
I
- Information
  Displays the timing mode (video signal input) coming from the graphics card in the computer, the LCD model number, the serial number, and the ViewSonic® website URL. See your graphics cards’s user guide for instructions on changing the resolution and refresh rate (vertical frequency).
  NOTE: VESA 1024 x 768 @ 60Hz, for example, means that the resolution is 1024 x 768 and the refresh rate is 60Hz.
- Input Select
  Toggles between the various input options that are available for the monitor.
M
- Manual Image Adjust
  Displays the “Manual Image Adjust” menu. You can manually set a variety of image quality adjustments.
- Memory Recall
  Returns the adjustments back to factory settings if the display is operating in a factory preset timing mode listed in the “Specifications” of this manual.
  NOTE: (Exception) This control does not affect changes made in the “Language Select” or “Power Lock” setting.
O
- Overscan
  Refers to a cropped image on your monitor’s screen. A setting on your monitor zooms in on movie content, so that you cannot see the outermost edges of the film.
R
- Recall
  Resets the ViewMode monitor settings.
- Resolution Notice
  The notice tells users that the current viewing resolution is not the correct native resolution. This notice will appear in the display settings window when setting up the display resolution.
- Response Time
  Adjusts the response time, creating smooth images without streaking, blurring, or ghosting. A low response time is perfect for the most graphicintense gaming, and provides amazing visual quality while watching sports or action movies.
S
- Setup Menu
  Adjusts On-Screen Display (OSD) Menu settings. Many of these settings can activate on-screen display notifications so users do not have to reopen the menu.
- Sharpness
  Adjusts the picture quality of the monitor.
V
- ViewMode
  ViewSonic’s unique ViewMode feature offers “Game”, “Movie”, “Web”, “Text”, “MAC”, and “Mono” presets. These presets are specifically designed to deliver an optimized viewing experience for different screen applications.
1
- 1ms Mode
  Choose whether to activate Moving Picture Response Time (MPRT); default setting is Off.
  NOTE:
- Make sure Input Timing detection is >100Hz to turn on 1ms Mode from default.
- If 1ms Mode is set to “On”, when turning on FreeSync, MPRT will automatically turn off.
- When 1ms Mode is set to “On”, the following functions will be grayed out and disabled: Brightness, Advanced DCR, Eco Mode, Response Time, DDC/CI Brightness adjustment.
- The IC controls Moving Picture Response Time, so the overall Brightness will be dark.

Troubleshooting
This section describes some common problems that you may experience when using the monitor.

No power
- Make sure you have turned on the monitor by pressing the Power button.
- Make sure the power cord is properly and securely connected to the monitor and power outlet.
- Plug another electrical device into the power outlet to verify that the outlet is supplying power.
Power is On, but no image appears on screen
- Make sure the video cable connecting the monitor to the computer is properly and securely connected.
- Adjust the brightness and contrast settings.
- Make sure the correct input source is selected.
Wrong or abnormal colors
- If any colors (red, green, or blue) are missing, check the video cable to make sure it is properly and securely connected. Loose or broken pins in the cable connector could cause an improper connection.
- Connect the monitor to another computer.
Screen image is too light or dark
- Adjust brightness and contrast settings via the OSD Menu.
- Reset the monitor to factory settings.
Screen image cuts in and out
- Make sure the correct input source is selected.
- Check for bent or broken pins in the video cable connector.
- Make sure the video cable connecting the monitor to the computer is properly and securely connected.
Screen image is blurred
- Adjust the resolution to the correct Aspect Ratio.
- Reset the monitor to factory settings.
The screen isn’t centered correctly
- Adjust the horizontal and vertical controls via the OSD Menu.
- Check the Aspect Ratio.
- Reset the monitor to factory settings.
The screen appears yellow
Make sure the “Blue Light Filter” is Off.
The OSD Menu does not appear on the screen/the OSD controls are inaccessible
- Check whether the OSD Menu is locked.
- Turn off the monitor, unplug the power cord, plug it back in, and then turn on the monitor.
- Reset the monitor to factory settings.
Control panel keys do not work
- Press only one key at a time.
- Restart the computer.
Some menus aren’t selectable in the OSD
- Adjust the ViewMode or the input source.
- Reset the monitor to factory settings.
No audio output
- If using ear-/headphones, ensure the mini stereo jack is connected.
- Make sure the volume is not muted, nor set to 0.
- Check the Audio Input setting.
The monitor will not adjust
- Make sure there are no obstructions near or on the monitor, and that there is adequate spacing.
- For more information, see “Adjusting the Viewing Angle”.
USB devices connected to the monitor do not work
- Make sure the USB cable is connected properly.
- Try changing to another USB port (if applicable).
- Some USB devices require a higher electric current; connect the device directly to the computer.
The external device is connected, but no image appears on the screen
- Make sure the Power is On
- Adjust brightness and contrast via the OSD Menu.
- Check the connecting cable and make sure it is properly and securely connected. Loose or broken pins in the cable connector could cause an improper connection.

Maintenance

General Precautions

Make sure the monitor is turned off and the power cable is unplugged from the power outlet.
Never spray or pour any liquid directly onto the screen or case.
Handle the monitor with care, as a darker-colored monitor, if scuffed, may show marks more clearly than a lighter-colored monitor.

Cleaning the Screen

Wipe the screen with a clean, soft, lint-free cloth. This removes dust and other particles.
If the screen is still not clean, apply a small amount of non-ammonia, nonalcohol based glass cleaner onto a clean, soft, lint-free cloth; then wipe the screen.

Cleaning the Case

Use a soft, dry cloth.
If the case is still not clean, apply a small amount of non-ammonia, non-alcohol based, mild non-abrasive detergent onto a clean, soft, lint-free cloth, then wipe the surface.

Disclaimer

ViewSonic® does not recommend the use of any ammonia or alcohol-based cleaners on the display screen or case. Some chemical cleaners have been reported to damage the screen and/or case of the monitor.
ViewSonic® will not be liable for damage resulting from use of any ammonia or alcohol-based cleaners.

Regulatory and Service Information

Compliance Information
This section addresses all connected requirements and statements regarding regulations. Confirmed corresponding applications shall refer to nameplate labels and relevant markings on the unit.

The following information is only for EU-member states:
The mark shown to the right is in compliance with the Waste Electrical and Electronic Equipment Directive 2012/19/EU (WEEE). The mark indicates the requirement NOT to dispose of the equipment as unsorted municipal waste, but use the return and collection systems according to local law.

Declaration of RoHS2 Compliance
This product has been designed and manufactured in compliance with Directive 2011/65/EU of the European Parliament and the Council on restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS2 Directive) and is deemed to comply with the maximum concentration values issued by the European Technical Adaptation Committee (TAC) as shown below:

ViewSonic VA2432-H 24 Inch 1080p IPS Monitor-fig-31

Certain components of products as stated above are exempted under the Annex III of the RoHS2 Directives as noted below. Examples of exempted components are:

Copper alloy containing up to 4% lead by weight.
Lead in high melting temperature type solders (i.e. lead-based alloys containing 85% by weight or more lead).
Electrical and electronic components containing lead in a glass or ceramic other than dielectric ceramic in capacitors, e.g. piezoelectronic devices, or in a glass or ceramic matrix compound.
Lead in dielectric ceramic in capacitors for a rated voltage of 125V AC or 250V DC=or higher.

Indian Restriction of Hazardous Substances
Restriction on Hazardous Substances statement (India). This product complies with the “India E-waste Rule 2011” and prohibits use of lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers in concentrations exceeding 0.1 weight % and 0.01 weight % for cadmium, except for the exemptions set in Schedule 2 of the Rule.

Product Disposal at End of Product Life
ViewSonic® respects the environment and is committed to working and living green. Thank you for being part of Smarter, Greener Computing. Please visit the ViewSonic® website to learn more.

USA & Canada:
https://www.viewsonic.com/us/go-green-with-viewsonic
Europe:
https://www.viewsonic.com/eu/go-green-with-viewsonic
Taiwan:
https://recycle.epa.gov.tw/

Copyright Information

Copyright© ViewSonic® Corporation, 2023. All rights reserved.
Macintosh and Power Macintosh are registered trademarks of Apple Inc.
Microsoft, Windows, and the Windows logo are registered trademarks of Microsoft Corporation in the United States and other countries.
ViewSonic®, the three birds logo, OnView, ViewMatch, and ViewMeter are registered trademarks of ViewSonic® Corporation.
VESA is a registered trademark of the Video Electronics Standards Association.
DPMS, DisplayPort, and DDC are trademarks of VESA.
Disclaimer: ViewSonic® Corporation shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from furnishing this material, or the performance or use of this product.
In the interest of continuing product improvement, ViewSonic® Corporation reserves the right to change product specifications without notice. Information in this document may change without notice.
No part of this document may be copied, reproduced, or transmitted by any means, for any purpose without prior written permission from ViewSonic® Corporation.

Customer Service
For technical support or product service, see the table below or contact your reseller.
NOTE: You will need the product’s serial number.

ViewSonic VA2432-H 24 Inch 1080p IPS Monitor-fig-32

Limited Warranty

What the warranty covers:
ViewSonic® warrants its products to be free from defects in material and workmanship during the warranty period. If a product proves to be defective in material or workmanship during the warranty period, ViewSonic® will, at its sole option, and as your sole remedy, repair or replace the product with a similar product. Replacement Product or parts may include remanufactured or refurbishedparts or components. The repair or replacement unit or parts or components will be covered by the balance of the time remaining on the customer’s original limited warranty and the warranty period will not be extended. ViewSonic® provides no warranty for any third-party software whether included with the product or installed by the customer, installation of any unauthorized hardware parts or components (e.g. Projector Lamps). (Please refer to: “What the warranty excludes and does not cover” section).
How long the warranty is effective:
ViewSonic® displays are warranted for between 1 and 3 years, depending on your country of purchase, for all parts including the light source and for all labor from the date of the first consumer purchase.
Who the warranty protects:
This warranty is valid only for the first consumer purchaser.
What the warranty excludes and does not cover:
- Any product on which the serial number has been defaced, modified, or removed.
- Damage, deterioration, or malfunction resulting from:
- Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification, or failure to follow instructions supplied with the product.
- Repair or attempted repair by anyone not authorized by ViewSonic®.
- Damage to or loss of any programs, data, or removable storage media.
- Normal wear and tear.
- Removal or installation of the product.
- Software or data loss occurring during repair or replacement.
- Any damage of the product due to shipment.
- Causes external to the product, such as electric power fluctuations or failure.
- Use of supplies or parts not meeting ViewSonic’s specifications.
- Failure of owner to perform periodic product maintenance as stated in the User Guide.
- Any other cause which does not relate to a product defect.
- Damage caused by static (non-moving) images displayed for lengthy periods of time (also referred to as image burn-in).
- Software – Any third-party software included with the product or installed by the customer.
- Hardware/Accessories/Parts/Components – Installation of any unauthorized hardware, accessories, consumable parts or components (e.g. Projector Lamps).
- Damage to, or abuse of, the coating on the surface of the display through inappropriate cleaning as described in the product User Guide.
- Removal, installation, and set-up service charges, including wall-mounting of the product.
How to get service:
- For information about receiving service under warranty, contact ViewSonic® Customer Support (Please refer to the “Customer Service” page). You will need to provide your product’s serial number.
- To obtain warranty service, you will be required to provide: (a) the original dated sales slip, (b) your name, (c) your address, (d) a description of the problem, and (e) the serial number of the product.
- Take or ship the product, freight prepaid, in the original container to an authorized ViewSonic® service center or ViewSonic®.
- For additional information or the name of the nearest ViewSonic® service center, contact ViewSonic®.
Limitation of implied warranties:
There are no warranties, express or implied, which extend beyond the description contained herein including the implied warranty of merchantability and fitness for a particular purpose.
Exclusion of damages:
ViewSonic’s liability is limited to the cost of repair or replacement of the product.
ViewSonic® shall not be liable for:
- Damage to other property caused by any defects in the product, damages based upon inconvenience, loss of use of the product, loss of time, loss of profits, loss of business opportunity, loss of goodwill, interference with business relationships, or other commercial loss, even if advised of the possibility of such damages.
- Any other damages, whether incidental, consequential or otherwise.
- Any claim against the customer by any other party.
- Repair or attempted repair by anyone not authorized by ViewSonic®.
Effect of state law:
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Some states do not allow limitations on implied warranties and/or do not allow the exclusion of incidental or consequential damages, so the above limitations and exclusions may not apply to you.
Sales outside the U.S.A. and Canada:
- For warranty information and service on ViewSonic® products sold outside of the U.S.A. and Canada, contact ViewSonic® or your local ViewSonic® dealer.
- The warranty period for this product in mainland China (Hong Kong, Macao, and Taiwan Excluded) is subject to the terms and conditions of the Maintenance
Guarantee Card.
For users in Europe and Russia, full details of warranty provided can be found at: http://www.viewsonic.com/eu/ under “Support/Warranty Information”.

Mexico Limited Warranty

What the warranty covers:
ViewSonic® warrants its products to be free from defects in material and workmanship, under normal use, during the warranty period. If a productproves to be defective in material or workmanship during the warranty period, ViewSonic® will, at its sole option, repair or replace the product with a like product. Replacement product or parts may include remanufactured or refurbished parts or components & accessories.
How long the warranty is effective:
ViewSonic® LCD displays are warranted for between 1 and 3 years, depending on your country of purchase, for all parts including the light source and for all labour from the date of the first consumer purchase.
Who the warranty protects:
This warranty is valid only for the first consumer purchaser.
What the warranty excludes and does not cover:
- Any product on which the serial number has been defaced, modified or removed.
- Damage, deterioration, or malfunction resulting from:
- Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification, unauthorized attempted repair, or failure to follow instructions supplied with the product.
- Causes external to the product, such as electrical power fluctuations or failure.
- Use of supplies or parts not meeting ViewSonic®’s specifications.
- Normal wear and tear.
- Any other cause which does not relate to a product defect.
- Any product exhibiting a condition commonly known as “image burn-in” which results when a static image is displayed on the product for an extended period of time.
- Removal, installation, insurance, and set-up service charges.
How to get service:
For information about receiving service under warranty, contact ViewSonic® Customer Support (Please refer to the attached “Customer Service” page). You will need to provide your product’s serial number, so please record the product information in the space provided below on your purchase for your future use. Please retain your receipt of proof of purchase to support your warranty claim.
For Your Records****
- To obtain warranty service, you will be required to provide (a) the original dated sales slip, (b) your name, (c) your address, (d) a description of the problem, and (e) the serial number of the product.
- Take or ship the product, in the original container packaging, to an authorized ViewSonic® service center.
- Round trip transportation costs for in-warranty products will be paid by ViewSonic®.
Limitation of implied warranties:
There are no warranties, express or implied, which extend beyond the description contained herein including the implied warranty of merchantability and fitness for a particular purpose.
Exclusion of damages:
ViewSonic®’s liability is limited to the cost of repair or replacement of the product.
ViewSonic® shall not be liable for:
- Damage to other property caused by any defects in the product, damages based upon inconvenience, loss of use of the product, loss of time, loss of profits, loss of business opportunity, loss of goodwill, interference with business relationships, or other commercial loss, even if advised of the possibility of such damages.
- Any other damages, whether incidental, consequential or otherwise.
- Any claim against the customer by any other party.
- Repair or attempted repair by anyone not authorized by ViewSonic®.

contact

Contact Information for Sales & Authorized Service (Centro Autorizado de Servicio) within Mexico:

Hermosillo:
- Distribuciones y Servicios Computacionales SA de CV.
- Calle Juarez 284 local 2
- Col. Bugambilias C.P: 83140
- Tel: 01-66-22-14-9005
- E-Mail: disc2@hmo.megared.net.mx
Villahermosa:
- Compumantenimietnos Garantizados, S.A. de C.V.
- AV. GREGORIO MENDEZ #1504
- COL, FLORIDA C.P. 86040
- Tel: 01 (993) 3 52 00 47 / 3522074 / 3 52 20 09
- E-Mail: compumantenimientos@prodigy.net.mx
Puebla, Pue. (Matriz):
- RENTA Y DATOS, S.A. DE C.V. Domicilio:
- 29 SUR 721 COL. LA PAZ
- 72160 PUEBLA, PUE.
- Tel: 01(52).222.891.55.77 CON 10 LINEAS
- E-Mail: datos@puebla.megared.net.mx
Veracruz, Ver.:
- CONEXION Y DESARROLLO, S.A DE C.V. Av.
- Americas # 419
- ENTRE PINZÓN Y ALVARADO
- Fracc. Reforma C.P. 91919
- Tel: 01-22-91-00-31-67
- E-Mail: gacosta@qplus.com.mx
Chihuahua:
- Soluciones Globales en Computación
- C. Magisterio # 3321 Col. Magisterial
- Chihuahua, Chih.
- Tel: 4136954
- E-Mail: Cefeo@soluglobales.com
Cuernavaca:
- Compusupport de Cuernavaca SA de CV
- Francisco Leyva # 178 Col. Miguel Hidalgo
- C.P. 62040, Cuernavaca Morelos
- Tel: 01 777 3180579 / 01 777 3124014
- E-Mail: aquevedo@compusupportcva.com
Distrito Federal:
- QPLUS, S.A. de C.V.
- Av. Coyoacán 931
- Col. Del Valle 03100, México, D.F.
- Tel: 01(52)55-50-00-27-35
- E-Mail : gacosta@qplus.com.mx
Guadalajara, Jal.:
- SERVICRECE, S.A. de C.V.
- Av. Niños Héroes # 2281
- Col. Arcos Sur, Sector Juárez
- 44170, Guadalajara, Jalisco
- Tel: 01(52)33-36-15-15-43
- E-Mail: mmiranda@servicrece.com
Guerrero Acapulco:
- GS Computación (Grupo Sesicomp)
- Progreso #6-A, Colo Centro
- 39300 Acapulco, Guerrero
  Tel: 744-48-32627
Monterrey:
- Global Product Services
- Mar Caribe # 1987, Esquina con Golfo Pérsico
- Fracc. Bernardo Reyes, CP 64280
- Monterrey N.L. México
- Tel: 8129-5103
- E-Mail: aydeem@gps1.com.mx
MERIDA:
- ELECTROSER
- Av Reforma No. 403Gx39 y 41
- Mérida, Yucatán, México CP97000
- Tel: (52) 999-925-1916
  E-Mail: rrrb@sureste.com
Oaxaca, Oax.:
- CENTRO DE DISTRIBUCION Y
- SERVICIO, S.A. de C.V.
- Murguía # 708 P.A., Col. Centro, 68000, Oaxaca
- Tel: 01(52)95-15-15-22-22
- Fax: 01(52)95-15-13-67-00
- E-Mail. gpotai2001@hotmail.com
FOR USA SUPPORT:
- ViewSonic® Corporation
- 381 Brea Canyon Road, Walnut, CA. 91789 USA
- Tel: 800-688-6688
- E-Mail: http://www.viewsonic.com