E Bycco LCD-X1 Electric Bike Meter User Guide
- June 1, 2024
- E Bycco
Table of Contents
E Bycco LCD-X1 Electric Bike Meter
Product Information
Specifications:
- Product Shell Material: ABS
- Liquid Crystal Transparent Window Material: High Hardness Acrylic
- Operating Voltage: DC24V, 36V, 48V, 52V, 60V (customizable)
- Connection Mode: Wired
- Communication Protocol: UART
Product Usage Instructions
Appearance and Size:
The product shell is made of durable ABS material, and the transparent
window is crafted from high hardness acrylic, providing a clear display
similar to tempered glass.
Operating Voltage and Connection:
The operating voltage options include DC24V, 36V, 48V, 52V, and 60V. Custom
voltages can also be accommodated. The device can be connected via a wired
connection.
Display and Control Functions:
The LCD-X1 panel offers various display functions including speed display,
power driving gear display, power quantity indication, fault prompts, total
and single mileage tracking, headlight display, and more. Users can control
power switch, headlight switch, movement control, speed settings, hibernation
time settings, and other configurable options.
Display Content Introduction:
The display screen provides information on headlights, USB charging status,
brake status, battery level display, power-assist gear range, speed display,
vehicle status codes, and fault code meanings.
Settings:
Users can adjust settings such as backlight brightness, mileage unit (KM or
MILE), voltage level, sleep time, power gear mode, wheel diameter, speed
measuring magnetic steel quantity, and more through the settings menu.
Frequently Asked Questions (FAQ):
-
Q: Can I customize the operating voltage beyond the listed options?
A: Yes, the operating voltage can be customized to suit specific requirements. -
Q: What is the material of the product shell?
A: The product shell is made of ABS material for durability. -
Q: How can I adjust the backlight brightness?
A: You can adjust the backlight brightness through the settings menu by selecting from brightness levels ranging from 1 (darkest) to 3 (brightest).
Appearance size and material
Product shell is ABS, liquid crystal transparent window is imported high hardness acrylic, hardness value is equivalent to tempered glass.
Operating voltage and wiring mode
Operating voltage: DC24V, 36V, 48V, 52V, 60V (instrument selection and setting), and other voltages can be customized.
mode of connection:
Note: the leads of some products use waterproof connector, and the user cannot see the lead color in the harness.
function declaration
-
Display function
Speed display, power driving gear display, power quantity indication, fault prompt, total mileage, single mileage, headlight display, single driving time display -
Control and setting functions
Power switch control, headlight switch control, 6 Km/h point movement control, wheel Diameter setting, maximum speed setting, idle automatic hibernation time setting, backlight brightness setting, voltage level setting, etc -
Communication protocol: UART
All contents of the display screen (full display in boot 1S)
Display content introduction
Total mileage ODO, single mileage TRIP, digital voltage Pow, single ride time Time, metric mileage Km, British system mileage Mile;
- Power-assist gear
- Range 0-9 can display, 6km boost and cruise control display;
- Speed display area
Maximum speed MAX, average speed AVG
Unit of MPH, KM / H
The instrument calculates the true speed based on the wheel diameter and the signal data
Vehicle status, and the significance of the fault code Significance of the vehicle status code:
| Status code (decimal system) | State meaning | remarks |
|---|---|---|
| 0 | whack | |
| 1 | continue to have | |
| 2 | stop a vehicle by applying the brake | |
| 3 | Power sensor failure (ride sign) | This is not going to happen |
| 4 | 6KM / H Cruise | |
| 5 | Real-time cruise | |
| 6 | Battery under pressure | |
| 7 | Motor failure | |
| 8 | Turn the fault | |
| 9 | Controller fault | |
| 10 | Communication reception failure | |
| 11 | Communication send fault | |
| 12 | A BMS communication failure | |
| 13 | Headlight fault |
Settings
P01: backlight brightness, 1 the darkest, 3 the brightest;
P02: Mileage unit, 0: KM; 1: MILE;
P03: Voltage level: 24V, 36V, 48V, default 36V;
P04: Sleep time: 0, no sleep; other numbers are sleep time, range: 1-60;
per unit minute;
P05: Power gear: 0,3 gear mode: 1,2V, 2 gear, 3V, 3,4V; 1,5 mode: 1,2V,
2,2.5V, 3,3V,4 gear, 3.5V, 5 gear, 4V;
P06: Wheel diameter: unit, inch; precision: 0.1;
P07: Number of speed measuring magnetic steel: range: 1-100;
P08: Speed limit: range 0-100 km/h, 100 indicates no speed limit,
- Non-communication state (instrument control): turn off PWM output when the speed is greater than the speed set; when the speed is less than the set speed, automatically open PWM output and the driving speed is ± 1 km/h; (for power speed limit only, no speed limit not)
- Communication status (Controller Control): Drive speed is maintained at the set point, Error: ± 1 km/h; (transfer speed limit)
Note: The value here is based on km. When the unit setting is converted
from km to mile, the speed value of the display interface will be
automatically converted to the correct mile value, but the speed limit value
data set at this menu under the mile interface is not converted, which is
inconsistent with the actual displayed mile speed limit value;
P09: zero start, non-zero start setting, 0: zero start; 1: Non-zero
start;
P10: Drive mode setting 0: Power drive (how much power output by power
gear, the switch is invalid).
- Electric drive (the power gear is invalid by the knob drive).
- Both power drive and electric drive coexist (electric drive zero start state).
P11: Power assist sensitivity setting range: 1-24;
P12: Power to start the strength setting range: 0-5;
P13: power magnetic steel disk type set 5,8,12 grain magnetic steel three
types
P14: The controller flow limit value sets the default 12A range: 1-20A
P15: The function has not been yet opened
P16: ODO zero clearance setting long press the key for 5 seconds ODO zero
clearance
P17:0: Non-enable cruise, 1: enable cruise; automatic cruise is optional
(valid for Protocol 2 only)
P18: Display speed ratio adjustment range: 50%~150%,
P19:0 gear enabling level, 0: including 0 gear, 1: excluding 0 gear
P20:0:2 Agreement 1:5S Agreement 2: standby 3: standby
Button Introductions
- During riding, need change PAS/Speed grades, shortly press
- During riding, need change data in Multi-function Area, shortly press
Long press , could switch status between MODE and ON/OFF;
Long press as a compound button, is mainly used for parameter setting, which could reduce misoperation due to complicated operation.
(No compound button with short-time press, because it’s difficult to operate.)
Specific operation explanations
- Change PAS grade
Suppose it’s PAS mode now,
shortly press , PAS grade +1
shortly press , PAS grade -1
Note: Due to the upgrade of the company’s product, the display content of the product part you get will be different from the instructions, but it will not affect your normal use.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>