DARK FOREST DK680 Wallfacer Series Tri Mode Mechanical Keyboard User Manual
- June 5, 2024
- DARK FOREST
Table of Contents
DK680 Wallfacer Series Tri Mode Mechanical Keyboard
User Manual **Wallpaper Series**
Product Parameter:
Brand: DARK FOREST
Series: Wallpaper
Model: DK680
Number of keys: 68 keys
Transmission line length: 1.8M
Charging port: Type-C (USB-C)
Working voltage:5V
Backlight effect: RGB
Total travel: 4.010.4mm
Pre-travel: 2.0±0.6mm
Operating force: 50±15gf
Switches’ durability: z50 million
Products size: 314.8mm(L)x104.8mm(W)x37.0mm(H)
Connection modes: Wired connection, 2.4G wireless connection, Bluetooth
connection.
Operating Environment:-10°C to50°C (5°F to 31°F )
Performance and specifications may be updated according to the operating
environment and requirements without notice.
Packing Content:
Keyboard, Type-C cable, 2.4G Receiver, Standby keycaps, Standby switches, Key puller, Switch puller, Manual, Service Guide, Dust cover.
Features & Advantages:
Tn-mode connection 16.8 million RGB light All switches hot-swappable function
Semi suspended keycap Detachable cable
Gateron switch and pedestal Type-C USB Doubleshot PBT keycaps Programmable
macros 1.6 Double-sided fiberglass PCB
Programmable macros download links:
www.darkforest2019.com
FUNCTION DESCRIPTION:
Charging
Plug the cable into a USB port and plug the other end into the keyboard port.
Charging Indicator:
When the battery is below 30%, a red Fn blinking indicator will be triggered.
A red light will stay on while charging; Fully charged in around 3 hours, The
red Fn will be restored.
The DK680 keyboard is compatible with all USB ports. Please use a 5V 2A
adapter or USB 3.0 for the best performance. The DK680 keyboard can be charged
in Bluetooth on/off mode.
This product supports up to 5V charging voltage and 2A charging current. We
are not responsible for any problems caused by improper charging.
Wired/2.46/Bluetooth mode (toggle switch)
Wired mode
- Switch the toggle switch to the cable option (it only works when a Use cable is plugged in).
- Connect our cable with your PC and keyboard. 3. Backlit will be turned on.
2.4G mode
- Switch the keyboard to the wireless option.
- The Backlit will be turned on.
- Connect our 2.4G receiver with your PC.
- HolcisFn+V key for 3 seconds until blinking indicator to activate 2.4G wireless pairing.
Slow or failed connections may exist due to different receiver versions,
please make sure all the settings are correct
Bluetooth mode
- Switch the keyboard to the Bluetooth option.
- The Backlit will be turned on.
- Hold’Fn+Z ‘ key for 3 seconds until blinking indicator to activate Bluetooth pairing.
- Search for the Bluetooth device’G68K8-5.0’on your device and connect it ( the Bluetooth indicator goes off after successful pairing).
Note: This keyboard supports pairing up to 3 devices simultaneously via
combination key Fn+Z/Fn+X/Fn+C. Simply short press combination keys Fn+X/Fn+C
to switch. Follow the above procedures to connect with other devices.
Slow or failed connections may exist due to different Bluetooth versions,
please make sure all the settings are correct.
Switch Bluetooth devices
Short press combination key Fn+Z/Fn+X/Fn+C to switch to another device.
Reconnect
- Switch the keyboard to the Bluetooth option to activate the keyboard (the keyboard will connect to the last connected device by default).
- The Bluetooth indicator flashes for 3 seconds and automatically pairs with the last paired device.
- If the Bluetooth indicator is off, press any button to enter the connection again. The keyboard must have been paired with the device to perform this function.
Backlit setting
For the RGB version Press Fn+ \ to change backlight mode (21 modes) Press
Fn+Tab to change single backlight color (Red/Green/Blue/Yellow/Purple/Ice
blue/White) In order to turn down the brightness of the backlight, you need to
press Fin( In order to turn up the brightness of the backlight, you need to
press Fn+) Press the Fn+Backspace to quick turn on and off the backlight In
order to turn down the speed of the backlight you need to press Fn+; In order
to turn up the speed of the backlight you need to press Fn+’
Electrical specifications
Charge current: 524mA
Wired maximum brightness current: 524mA
Working time with backlight: 6h
Working time without backlight: 10h
2.4G/Bluetooth maximum brightness current: 254.2-274.5mA
2.46/Bluetooth sleep current : 0.05mA
2.4G/Bluetooth without backlight current: 18mA
TROUBLESHOOTING:
If unable to pair the keyboard to the device, confirm that the device you’re
trying to pair with is Bluetooth-capable. If so, restart the device and try
pairing it with the keyboard again.
Note: On a Windows computer, a new Bluetooth connection will sometimes
require an additional software updates process that may still be ongoing after
a message appears indicating successful completion. Wait at least 20 minutes
after pairing to make sure all updates are completed before restarting the
computer.
Confirm that the device is configured to accept Bluetooth connections
(windows)and supports an external keyboard(HID profile).
Go to Bluetooth Devices Open Settings and select the following: Allow
Bluetooth devices to find this computer. Allow Bluetooth devices to connect to
this computer. Alert me when a Bluetooth device wants to connect.
My keyboard isn’t working.
For the keyboard: Turn the keyboard off and back on. Turn Bluetooth off and
restart the computer(Windows). For the device Go to Bluetooth settings and
turn off Bluetooth anflorgeethe keyboard. Restart the device and turn on
Bluetooth to reconnect.
Bluetooth connection is interrupted even within 10 meters.
Check if the keyboard is resting on a metal surface that can interfere with
the Bluetooth signal.
Third-party input tools are not compatible with the keyboard.
Due to compatibility, version brands, and drivers of windows / Android OS, the
functions of third-party input tools may be affected while using the keyboard.
please make sure your operating system and drivers are updated.
C ertain Fn keys or multimedia keys do not work under Windows/Android
mode.
Functions of certain multimedia keys may be disabled due to compatibility,
versions, brands, and drivers of Windows/Android OS.
Cautions:
Keep the product, accessories, and packaging parts out of reach of children to
prevent any accidents and choking hazards. Always keep the product dry to
avoid corrosion. Do not expose the product to extreme temperatures below 10
°C(5°F)or above 50°C(131°F) to preserve the lifetime of the keyboard and
battery.
Designed by DARK FOREST in New York Made in China Dark Forest Technology Co.,
Ltd Website:www.darkforest2019.com
Switch Replacement Guide
Shortcuts key:
| |
---|---|---
Documents / Resources
| DARK
FOREST DK680 Wallfacer Series Tri Mode Mechanical
Keyboard
[pdf] User Manual
DK680, 2A7HC-DK680, 2A7HCDK680, Wallfacer Series, Tri Mode Mechanical
Keyboard, Wallfacer Series Tri Mode Mechanical Keyboard, DK680 Wallfacer
Series Tri Mode Mechanical Keyboard
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>