ZAQE A22 Voice Recoder User Manual
- June 16, 2024
- ZAQE
Table of Contents
ZAQE A22 Voice Recoder
Instruction of Buttons
Pre-use preparation
This voice recorder can be used alone or Bluetooth with the APP DVR Link . Follow the steps to use the APP.
- Scan the QR code and open it in browser, download and install the APP.
- Connect with the Bluetooth.
- Transfer recording files from the voice recorder to your mobile phone.
Charging
When low power, the device will turn off automatically, please charge the
device in time.
Bluetooth
Long press the power button about 8 seconds to reset the Bluetooth, the indicator flashes blue.
Recording
-
When using the device individually
Long press the REC button, the indicator flashes red to start a recording. While recording, long press the REC button, the indicator turns from red to blue to pause the recording. -
When using the APP
When connected with the APP, select Start REC to start a recording.
Select End REC and confirm Save to finish and save a recording.
Swipe left on the recording file, select Edit to rename the recording, and select Share to share.
Troubleshooting
- Cannot connect with the APP DVR Link.
- Make sure you’ve turned on the device.
- Reset the Bluetooth.
- No response from the voice recorder.
- If there is no operations over 3 minutes, the device turns off automatically, so you might mistaken it as no response, simply long press the power button to turn on it.
- Cannot turn on the device.
The battery may have run out, please charge it and try again.
Troubleshooting
| Size | 6021.517mm (include the back clip) |
|---|---|
| CPU | ATS2837, dual core 240MHZ, CK802 + 400MHZ 32bit DSP |
| Bluetooth | Bluetooth 5.0 |
| Recording Format | WAV |
| REC Bit Rate | 256Kbps |
| REC Distance | ≤3 meters |
| Mobile Phone OS | Above Android 5.0 / Above IOS 9.0 |
| Computer OS | Above WINDOWS XP/VISTA/ 7 |
| Battery | 250mAh |
| Max. Internal Memory Recording time | ≈400 hours |
| Full Charged Recording time | ≈11 hours |
| Working Temperature | -10°C~55°C (14°F~131°F) |