denver PFF-1160 Frameo Photo Frame User Manual
- June 14, 2024
- Denver
Table of Contents
USER MANUAL
PFF-2160
Before connecting, operating or adjusting this product, please read this users manual carefully and completely.
If the user manual is not printed in your local language, then please enter our website to see if it is found online under the model you have. The website address is: denver.eu
Important safety information
WARNING: Please read the safety instructions carefully before using the product for the first time and keep the instructions for future reference. Read all the safety information below before using this Frameo product.
1. This product is not a toy. Keep it out of reach of children. If operated
by children, please always make adult supervision.
2. Please keep the product away from pets.
3. Do not try to open the Frameo product! The device may contain parts with
deadly voltage.
4. Do not expose to heat, water, moisture, direct sunlight!
5. Only charge with the original adapter supplied with this product!
6. Repairs or service should only be performed by qualified personnel.
7. To reduce the risk of fire or electric shock, do not expose this apparatus
to rain or moisture. The apparatus shall not be exposed to dripping or
splashing and that objects filled with liquids, such as vases, shall not be
placed on apparatus.
8. The direct plug-in adapter is used as disconnect device, the disconnect
device shall remain readily operable. So make sure there is space around the
power outlet for easy access.
9. Product operating and storage temperature is from -10 degree Celsius to 40
degree Celsius. Under and over this temperature might affect the function.
-
POWER
After connecting power adapter, please press and hold power button for approximately 5 seconds (until screen turns on).
When it is on, press and hold power button for approximately 3 seconds to access reboot or power off menu. Short press on power button will turn off/onscreen (but leave the photo frame in on position). -
Type-c
Connect a USB flash drive. USB is for service use only. -
USB
Insert USB stick here to import pictures. -
MicroSD card
Load external max 32GB microSD memory card here. -
DC
Connect DC adapter to power on the device.
User Manual
2023
Get started
Congratulations on your brand new Frameo photo frame!
If you are new to using Frameo then start by following the Frameo quick setup
or follow the on-screen guide when powering it on for the first time.
Once you have set up your Frameo frame, you can start connecting it to your friends and family.
Frameo app
To send photos to your frame, use the Frameo app for iOS or Android.
Frameo App
Instantly Share Photos & Videos
Video tutorials
Check out our “Frameo Tutorials” playlist on YouTube with informative videos where we guide you on how to get started using Frameo. two the code to the right or use the link to find the playlist.
Frameo quick setup
When starting your frame for the first time, you will need to set up the frame.
- Select a language. This will be the language used on the Frameo.
- Connect your frame to the internet by connecting it to Wi-Fi.
- Verify or correct the date and time.
- Frameo may ask you to update to the latest version. It is recommended to update your frame before continuing if asked to.
- Enter your name, and the location where you have placed your frame e.g. “John Doe” and “Living room”, “Kitchen” or “Office”. Finally set the timezone if not already correct.
Start using Frameo
Next step is to connect Frameo with your friends and family by providing them with a code from your frame.
If you want to be able to send photos to the frame yourself, start by downloading the app for icy or Android on App Store or Google Play. Then use the code to connect your frame and app as described below.
Connecting a new friend
Make sure that your friend has downloaded and installed the Frameo app.
Click the add friend icon on your frame . A dialog will appear showing a connection code, which is valid for 12 hours.
Now share this code in whatever fashion you prefer e.g. SMS, E-Mail, IM, phone call, to your friend.
Once your friends have added the code in their Frameo app, they will automatically appear on your frame and be able to send you photos.
Read chapter Change options for a friend to allow connected friends, to retrieve and share the connection code via the smartphone app.
Navigating your Frameo
Swipe left or right to go through your photos.
To access the menu, simply tap once on the screen.
In the menu you will find the most used features.
Add friend
This will generate a code that you can share with your friends and family
so they can connect and send photos to your frame.
Settings
Opens the Settings.
Power menu
Opens the power menu.
React
Opens the React menu.
NB. The React menu can also be accessed by double-tapping on the screen.
Hide photo
Hides the current photo. This means that the photo will no longer be shown
in the slideshow. If needed the photo can be shown again through the settings
menu.
Gallery
Opens a gallery which allows for easy and fast navigation through your
photos.
Fit to frame/Fill frame
This toggles how the photo is shown.
The Fill frame option is the default. The photo is scaled so that it fills the whole screen. It will be centered around what is selected as the most important part. See the first picture below.
Fit to frame will make sure that the entire photo is shown on the screen. See the second picture below.
Adjust photo
Allows you to adjust the position of the photo in the frame for an even
better fit. Here you can also use to rotate your photo, and you can use to
edit the caption on imported photos. For received photos, please ask the
sender to edit the caption in the Frameo app.
Interacting with videos
When a video is shown two additional controls are shown. One for play/pause
of the video and one to control the volume level for video sounds.
Press to start the video playback. Pressing will pause the video playback.
Press to open the volume slider. Use the slider to adjust the volume level for video sounds.
Pressing will mute the video while pressing will unmute the video.
Power menu
Tap the power icon to access the power menu. Here you can power off using ,
restart your frame using or enter sleep mode using .
NB. Make sure to always use the power off button on the device or in the power menu to turn Frameo off. Never disconnect power when Frameo is running.
React menu
Tap one of the reactions to let the sender know how it made you feel.
External storage menu
When inserting an external storage (e.g. a microSD card) a menu will
automatically appear with three options: Press to play photos directly from
the external storage, press to import photos to the internal memory of your
frame or press to make a backup of your frame.
Clock and Weather widgets
The current time and weather will appear in the upper-right corner of the
frame when the frame has received at least one photo. Tapping either of these
will open the weather menu.
Weather menu
The weather menu contains more detailed weather forecasts and has shortcuts
to weather-related settings.
Shows the weather location of your frame. Tap to access the weather location settings.
1 DAY
1-day forecast which includes weather conditions for time periods of the day.
4 DAY
4-day forecast. Tap to see the weather forecast for the next four days.
Displays the frame’s current time. Tap to access the time settings.
Settings
Through the settings, you can personalise your frame to your needs.
My frame
Frame name
Changes the name of your frame. This is also the name that connected
friends and family will see in their list of connected frames in the
smartphone app.
Frame location
Changes the location of your frame. This is the location displayed on your
friends’ and family’s list of connected frames which can help to distinguish
frames from each other.
Set language
Sets the language used on the frame.
Weather location
Sets the location for the frame’s weather feature, ensuring that your frame
displays the appropriate weather forecast for you.
Temperature unit
Toggles between the Fahrenheit and Celsius temperature scales.
Date
Sets the data used on the frame.
Time
Sets the time used on the frame.
Frameo will automatically try to set the correct date and time when connected
to the internet.
Time zone
Sets the time zone used on the frame.
Set first day of week
Sets which day of the week is considered the first.
Enable/Disable 24-hour format
Enables, and disables, 24-hour time format.
Manage photos
In the manage photos menu you can see how many photos are on your frame and the storage they use. You can also see the amount of storage left available on your device for storing new photos.
Show/hide photos
Select which photos to hide by tapping them. Hidden photos will NOT be
deleted from your frame and you can always select them to be shown again.
Use to hide or show all photos.
Delete photos
Select photos that you want to permanently delete from your frame by
tapping the photo.
Use to select or deselect all and to permanently delete the selected photos.
Import photos
Allows you to import photos from an external storage (e.g. microSD card).
Before you try to import photos, make sure you have an external storage (e.g. microSD card) inserted into your frame with the photos you wish to import.
Start by selecting the photos that you want to import onto your frame. Once selected tap the import button to start the import process.
Use to select or deselect all photos on the external storage (e.g. microSD card).
Use to set the sort order of photos before import and to order by ascending/descending.
Transfer from computer
Allows you to transfer photos from a computer using a USB cable. Enable the
feature and then follow the on-screen guide for step-by-step instructions on
how to transfer photos to your frame.
For more information, please visit our help center: https://frameo.net/usb_faq
Export photos
Allows you to export photos from the frame to external storage (e.g.
microSD card).
The export function will export all photos on the frame as well as profile pictures.
Play from external storage
Enables / disables playback of photos and videos directly from an external
storage (e.g. microSD card) without taking up space on the frame.
My Friends
This list contains all the connected friends that are allowed to send photos to your frame.
Change options for a friend
Click the options icon to open the friend options menu. From here you can
allow / disallow if a friend may share the code to the frame. If this is
enabled the friend can retrieve and share the code to the frame from his/her
app.
From the options menu you can also delete a friend, by pressing the DELETE FRIEND button. This will remove the friend from the list and thereby remove their permission to send photos to the frame. You will then be asked to confirm the removal and if you would like to remove all photos previously received from this friend.
Add person
To allow a new person to send you photos, simply tap the add friend button
and share the presented code in whatever way you prefer.
Display
Brightness level
Adjust the brightness level of the screen.
Sleep mode
Frameo offers a sleep mode which turns off the screen to reduce power
consumption. The default setting is to turn off the screen at 23:00 and turn
on the screen again at 07:00 every day.
This can be altered by changing your sleep schedule(s). It is possible to have
multiple schedules active at once to e.g. have different settings for weekdays
and the weekend or a separate schedule to turn off the frame while at work.
Your frame is not powered down or in standby, so you will still be able to receive photos during sleep mode.
Slideshow
Timer
Set the duration that a photo should be displayed before showing the and
photo.
Fill frame
Set the default frame photo setting. Check to set default to fill which
makes the photos fit the device screen according to the most important part of
the photo. Uncheck to make the photo fit inside the screen of the device,
adding background bars on the sides or top/bottom.
Frame background
Choose between several different frame background options to be shown as
bars if the photo does not fill the screen.
Photo display order
Sets the order in which your photos are displayed on the frame.
- By date taken: Photos are shown in order of when it was taken.
- By date received: Photos are shown in order of when it was received.
- Shuffle: Photos are shuffled and shown in a random order.
Reverse photo display order
Sets if photos are displayed newest to oldest or oldest to newest.
Show caption
Set whether or not to display the captions that your friends have sent with
the photo. Check to display captions. Uncheck to hide captions.
Show clock
Set whether or not to display the clock widget in the upper-right corner of
the slideshow.
Show weather
Set whether or not to display the weather widget in the upper-right corner
of the slideshow.
Autoplay
Enables/disables autoplay of videos in the slideshow. Videos can always be
manually started regardless of this setting.
Video playback
Determines how videos should be played when autoplay is enabled.
- Loop videos: The video will loop until the slideshow timer is up.
- Play once: The video will play once and show its thumbnail until the timer is up.
- Play once and continue: The video will play once and continue to the and photo, or video, once it completes.
Auto mute
Enable to automatically mute the video volume after a short period of time
of not interacting with the frame.
Video volume
Adjust the volume level for video sounds on the frames.
Wi-Fi
Set which Wi-Fi the frame connects to. If you are connecting to a network with a captive portal Connection status will say that Wi-Fi login is required and show . Tap this to open a login screen where you can enter credentials to access the network.
Wi-Fi details
Use to show details about the current connected Wi-Fi.
Reset Wi-Fi
Use to delete all Wi-Fi information and restart your frame.
Notifications
Show notifications
Enables/disables whether notifications are shown in the slideshow (e.g.
when a new photo is received).
Notification volume
Adjust the volume level for notification sounds.
Storage space
Enables/disables notifications shown when frame storage is low.
Backup
Enables/disables notifications shown if automatic backup has failed.
Network connection
Enables/disables notifications showing network connection status.
New photos
Enables/disables notifications shown when receiving new photos.
New friends
Enables/disables notifications shown when new friends are added.
Software update
Enables/disables notifications shown when a software update has been
installed.
Feature news
Enables/disables notifications shown when new exciting features are added.
Date and time
Enables/disables notifications shown if time or date is not set correctly.
Backup and Restore
Backup frame to external storage (e.g. microSD card)
Tap to make a backup of your photos, friends and settings. The time of the
latest successful backup is also displayed here.
Any existing backup on the external storage will be overridden!
Automatic backup
If checked, your frame will automatically take a backup within 30 hours of
receiving new photos or making changes to your frame.
Restore from backup
Before you attempt to restore your frame, start by confirming that your
backup is up-to-date. This is done by confirming the date under “Backup frame
to external storage (e.g. microSD card)”. If e.g. the last backup is too old
or if no backup is made, than press the “Backup frame to external storage
(e.g. microSD card)” button to make a new backup.
NB: To keep both the old and the new frame operational at the same time after restoring from backup, please make sure that both frames are updated to the latest version beforehand.
If you wish to restore a backup on a frame that has already been setup, then you must first reset the frame. This is done by pressing the “Reset frame” button. This will delete all data on the Frameo and reset the Frameo to its setup screen.
On the setup screen you can select the “Restore from backup” button which will restore your frame according to the backup.
If the “Restore from backup” button isn’t visible, than confirm that the external storage (e.g. microSD card) is correctly mounted.
Reset frame
Removes all data from your frame.
This will permanently remove all your photos, friends/connections and settings.
Help
Guide
Shows the quick start guide, which was shown when you first started the
frame.
Support
Find contact information for Frameo’s support team, and find technical
device information.
The menu features a special QR code that is there for our support staff to scan. It contains additional device details and information, enabling our support team to efficiently address your specific concerns and provide accurate assistance. Simply take a photo of the QR code and share it with our support staff.
About
Peer ID
This is a unique ID for your photo frame. When contacting our support,
please provide this ID with your message.
Frameo version
Shows what version of the Frameo software is currently installed on your
frame.
Check for update
Check if an update is available for your frame.
Beta program
If checked the device will join the Beta program where it will receive
updates more frequently and before normal release devices.
Third party attributions
Open source libraries
Opens a list of open source libraries used in the app and their licenses
Share anonymous analytics data
Sharing anonymous analytics data helps us tremendously to improve the
Frameo software. We understand if you do not wish to share this data with us.
Keep it checked if you wish to help us improve Frameo. but unchecked to deny
the sharing of anonymous analytics data.
Privacy
For more information regarding privacy, please visit http://privacy.frameo.net
Support
Please visit https://support.frameo.net/hc for FAQ, support and to provide feedback.
Warranty, Compliance, Support and Safety information
For more information regarding warranty, hardware compliances, support and safety please refer to the material included in the package.
Manufacturer’s name or trade mark,
commercial registration number and address| Zhongshan MLS Electrical Appliance
Co.,Ltd
5F, Building 4, No.1, Mulinsen Road, Xiaolan
Town,528400 Zhongshan City, Guangdong
Province, China
commercial registration number: 91442000
MA7L3KGF41
---|---
Model identifier| M120300-A010EU
Input voltage| 100-240V
Input AC frequency| 50/60HZ
Output voltage| 12V
Output current| 3A
Output power| 36W
Average active efficiency| 89.73% at 115V 60Hz
89.55% at 230V 50Hz
No-load power consumption| 0.06W at 115V 60Hz
0.07W at 230V 50Hz
Please notice – All products are subject to change without any notice. We take reservations for errors and omissions in the manual.
ALL RIGHTS RESERVED, COPYRIGHT DENVER A/S
Electric and electronic equipment contains materials, components and substances that can be hazardous to your health and the environment, if the waste material (discarded electric and electronic equipment) is not handled correctly.
Electric and electronic equipment is marked with the crossed out trash can symbol, seen above. This symbol signifies that electric and electronic equipment should not be disposed of with other household waste, but should be disposed of separately.
All cities have established collection points, where electric and electronic equipment can either be submitted free of charge at recycling stations and other collection sites, or be collected from the households. Additional information is available at the technical department of your city.
Hereby, Denver A/S declares that the radio equipment type PFF-2160 is in
compliance with Directive 2014/53/EU. The full text of the EU declaration of
conformity is available at the following internet address:
denver.eu and then click the search ICON on topline of
website. Write model number: PFF-2160
Now enter product page, and RED directive is found under downloads/other
downloads.
Operating Frequency Range: 2412-2472MHZ, 5180-5240MHZ, 5745-5825MHZ
Max Output Power: 17dBm
DENVER A/S
Omega 5A, Soeften
DK-8382 Hinnerup
Denmark
www.facebook.com/denver.eu
Contact
Nordics
Headquarter
Denver A/S
Omega 5A Soeften
DK-8382 Hinnerup
Denmark
Phone: +45 86 22 61 00
(Push “1” for support)
E-Mail
For technical questions, please write to:
support.hq@denver.eu
For all other questions please write to:
contact.hq@denver.eu
Benelux
DENVER BENELUX B.V.
Barwoutswaarder 13C+D
3449 HE Woerden
The Netherlands
Phone: 0900-3437623
E-Mail: support.nl@denver.eu
Spain/Portugal
DENVER SPAIN S.A
Ronda Augustes y Louis Lumiere, n° 23 – nave 16
Parque Tecnológico
46980 PATERNA
Valencia (Spain)
Spain
Phone: +34 960 046 883
Mail: support.es@denver.eu
Portugal:
Phone: +35 1255 240 294
E-Mail: denver.service@satfiel.com
Germany
Denver Germany GmbH Service
Max-Emanuel-Str. 4
94036 Passau
Phone: +49 851 379 369 40
E-Mail
support.de@denver.eu
Fairfixx GmbH
Repair and service
Rudolf-Diesel-Str. 3 TOR 2
53859 Niederkassel
(for TV, E-Mobility/Hoverboards/Balanceboards, Smartphones & Tablets)
Tel.: +49 851 379 369 69
E-mail: denver@fairfixx.de
Austria
Lurf Premium Service GmbH
Deutschstrasse 1
1230 Wien
Phone: +43 1 904 3085
E-Mail: denver@lurfservice.at
If your country is not listed above, please write an email to
support@denver.eu
DENVER A/S
Omega 5A, Soeften
DK-8382 Hinnerup
Denmark
denver.eu
facebook.com/denver.eu
Version 1.1
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>