Primevolve NFJ2002E Space Heater with Thermostat Instruction Manual
- June 14, 2024
- Primevolve
Table of Contents
PTC SPACE HEATER INSTRUCTION MANUAL
(Model: NFJ2002E)
Thanks for choosing our PTC heater. Your product is covered by 12-month warranty. If you have any problem or question, please feel free to contact us via email: support@primevolve.com. We will provide you with the best solution according to your exact issue. Please read all instructions carefully before using the heater.
FEATURES:
- Stylish appearance design, elegant shape.
- High-quality ceramic heating element, saving electricity and energy.
- Multi-level power selection to meet different requirements.
- Multiple intimate protections to ensure safe use.
- Standard power cord, safe and reliable.
- 12-hour timing/reservation, free control of time.
PRODUCT DISPLAY:
- Control Panel
- Net Cover
- Front Shell
- Base
- Display Area
- Fan
- Intelligent Temperature Control
Remote Control
Usage of the remote controller: the key functions are basically the same as
the body operation panel.
(NOT INCLUDE BATTERIES)
- ON/OFF: Product power on/ power off ，the internal fan is delayed for 30s after shutdown in order to fully dissipate the heat and avoid damaging the heater.
- MODE: Natural wind/Low heat/ Mid heat/High heat mode Setting
- TIMER: Timing settings, maximum 12h timer support
- OSC: Oscillation setting
- TEM+/TEM-: Temperature settings
SPECIFICATION:
- Wattage: 1500W(US) / 2000W(EU)
- Voltage: 120V(US) / 220-240V(EU)
- Frequency: 60HZ(US) / 50-60Hz(EU)
- Dimensions(BOX): 210x170x440mm
- Gross Weight: 2.0KG
IMPORTANT SAFETY INSTRUCTIONS:WARNING!
When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock or personal injury.
INSTALLATION:
Take the chassis out of the box, load the body from top to bottom, align the slots of the chassis with the sliding buttons of the body, and keep the direction of the power cord outlet of the body and the chassis in the same direction (Picture 1), rotate the chassis after loading, and then put the power cord into the slot to finish the installation (Picture 2).
OPERATION:
-
Start the machine
Ensure the machine is OFF, then plug the heater into outlet and the power light is on . Press the ON/ OFF key (or press the ON / OFF key of the 120V(US) / 220-240V(EU) remote controller) for start, the machine at middle gear after starting, the digital screen displays ” Ambient temperature “. -
Mode setting
Repeatedly press the “Mode” key so that the heater switches to ” low gear -middle gear-high gear-Fan “. -
Temperature setting—-“+” or “-” Intelligent temperature control
Press “+” or “-” button, the machine is under the intelligent temperature control mode and you can set the temperature value, set the range of 10-30℃/(maximum 30℃/86℉, minimum 10℃/50℉）. When you press “+” or “-” , the display screen will flash. The display screen flashes for 5 seconds means you set the temperature successfully. 50-86℉
Note:
The gear mode of the machine operation will change according to the change to the ambient temperature. When the set temperature is less than the ambient temperature, PTC does not work, the machine will delay the air supply for 20 seconds to stop working; When the ambient temperature < set temperature ≤ ambient temperature +6℉(ambient temperature +3℃), the PTC runs in the medium range and the fan runs normally; When the ambient temperature +6℉ (the ambient temperature +3℃) < the set temperature, the PTC is in high operation and the fan is in normal operation. -
Timing function
When the heater is working, press the Timer/Reserve key to enter the timing stop state (within 0-12 hours, 0 is considered to cancel the timing function). The display flashes for 5 seconds mean you set the timer successfully and the display screen shows the ambient temperature. -
Oscillation Function
When the space heater is operation mode, press the “Oscillation” key to open in the oscillation function, pressing this button to turn off the oscillation function; when the electric heater stops heating function, the wind oscillating function also stops. -
Touch the button of ON/Off mode and unplug the heater when you are finished using it.
NOTE: After the heater is turned off, it will send cold air for 30 seconds to avoid overheating.
IMPORTANT NOTE:
According to the rules of physics, hot air goes up and cold air goes down.
Therefore, Please do not place the heater in a high place, otherwise it will
be hard to feel the heat directly.
COMMON QUESTIONS & ANSWERS:
1.What size room is the heater suitable for?
This heater covers the area up to 30 ㎡.
2.Will this automatically shut off if it overheats? And will it automatically stop working if it is tilted or tipped?
Yes, this heater has intelligent temperature control to ensure the safety. And this heater has tip-over protection. It will stop working when it is tilted or tipped.
3.What is the noise level? Will it affect sleeping when using at room?
The noise level is ＜45dB and it will not affect sleeping when using at room.
4.Can I touch it when in use?
The heater will get hot when in use, but the temperature does not cause damage. To avoid burns, please be careful and do not touch it when in use.
5.Why Ido feel like heat doesn't get distributed throughout the space evenly?
The heating effect will affect by the room size and the temperature. Please turn on the thermostat to the max setting first.
ATTENTION: PLEASE READ CAREFULLY BEFORE USING!
Read all instructions before using heater:
- This heater is hot when in use. To avoid burns, do not let bare skin touch a hot surface. Please use handle in the rear when moving this heater.
- Keep combustible materials such as furniture, pillows, bedding, papers, clothes and curtains at least 0.9m from the front of the heater and keep them away from the sides and rear.
- Extreme caution is necessary when any heater is used by or near children or invalids and whenever the heater is left operating and unattended.
- Do not use outdoors. Always unplug the heater when not in use.
- Do not operate the heater with a damaged cord or plug or after the heater malfunctions or has been dropped or, damaged in any manner. Return heater to an authorized service facility for examination, electrical or mechanical adjustment, or repair.
- This heater draws 12.5 amps during operation. To prevent overloading a circuit, do not plug the heater into a circuit that already has other appliances working.
- This heater is not intended for use in bathroom, laundry areas and similar moist indoor locations. Never locate heater where it may fall into a bathtub or other water container.
- Do not run cord under carpeting. Do not cover cord with throw rugs, runners or the like. Arrange cord away from traffic areas where it will not be tripped over.
- It is normal to feel warm when touch the plug; however, a loose fit between the AC outlet (receptacle) and plug may cause overheating and distortion of the plug. Contact a qualified electrician to replace loose or worn outlet.
- To disconnect the heater, first press the ON/OFF key (or press the ON/OFF key of the remote controller) to the OFF, then grip the plug and pull it from the wall outlet. Never pull by the cord.
- Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire, or damage the heater.
- To prevent a possible fire, do not block air intakes or exhaust in any manner. Do not use on soft surface, like a bed, where openings may become blocked.
- A heater has hot and arcing or sparking parts inside. Do not use it in the areas where gasoline, paint, or flammable liquids are used or stored. Use this heater only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock, or injury to persons.
- Avoid the use of an extension cord because the extension cord may overheat and cause a risk of fire. However, if you have to use an extension cord, the cord shall be No.14 AWG minimum size and rated not less than 1500 watts.
- The output of this heater may vary and its temperature may become intense enough to burn exposed skin. Use of this heater is not recommended for persons with reduced sensitivity to heat or an inability to react to avoid burns.
- SAVE THESE IMPORTANT INSTRUCTIONS FOR EASY REFERENCE.
CLEANING AND STORAGE
We recommend that the heater be cleaned at least once a month and before off season storage.
- Turn off the heater and unplug it. Allow it to cool.
- Use a dry cloth to clean the external surfaces of the heater.
NOTE: DO NOT USE WATER,WAX,POLISH, OR ANY CHEMICAL SOLUTIONS.
- Clean your heater using the above-mentioned steps, then pack the heater in its original container and store it in a cool dry place.
- This heater does not disassemble.
WARRANTY:
We offer 1 year warranty, if any question or problem, please feel free to contact us via email: support@primevolve.com. We will provide you the best solution according to your exact issue.
www.primevolve.com
Name: Oule Ltd
Address: 39-41 High Street, New Malden,
Surrey, England, KT3 4BY
E-mail: oule.ukrep@outlook.com
Company: Qing UG (haftungsbeschränkt)
Address: Undinestr. 7, 12203 Berlin Germany
Tell: 004917662179550
E-mail: pmdheinrich@gmail.com
References
- Primevolve™ - Best Battery Operated Portable Standing Ffor Summer 2022
- Primevolve™ - Best Battery Operated Portable Standing Ffor Summer 2022
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>