Primevolve YND-1200D Primevolve Ceramic Desk Heater User Guide

Primevolve YND-2000D Ceramic Electric Heater with Remote

Specifications

• BRAND: Primevolve
• SPECIAL FEATURE: Digital Display, On Off Timer, Electronic Thermostat, Remote Control, Overheat Protection
• COLOR: Pith Black
• FORM FACTOR: Tower
• INDOOR/OUTDOOR USAGE: Indoor
• POWER SOURCE: AC, Corded Electric
• HEATING METHOD: Convection
• RECOMMENDED USES FOR PRODUCT: Office, Desk, Home
• MOUNTING TYPE: Free Standing
• ROOM TYPE: Living room, Bedroom, Home Office, Nursery
• HEATING COVERAGE: 200 square feet
• BURNER TYPE: Ceramic
• HEAT OUTPUT: 1500 Watts

Introduction

Remote control and a 90° oscillation in all directions. This ceramic heater can turn 90 degrees to produce uniform warmth across the room, keeping it nice and comfy all the time. You may use the included remote control to adjust the heat and oscillation settings from your bed or couch. This tower space heater can reach full temperature in 3 seconds thanks to its strong 1500W PTC ceramic element. UL certified With two heat settings (high 1500 watts/low 1000 watts) and a thermostat-controlled setting, it may be used to warm up a variety of rooms, including garages, living rooms, offices, dorm rooms, and hot yoga studios. Made of V0 flame-retardant materials, it has a number of safety features, such as a 15° tip-over guard, built-in overheat guard (which shuts off automatically when it reaches 185°F), V0 flame-retardant 2-prong plug, and a robust 59in.

This indoor space heater has a noise level lower than 45dB, making it suitable for use in a bedroom while you sleep. Timer sets provide 12 hours of restful sleep or a long snooze, making them ideal for warming a room while someone reads, works, studies, or watches TV. After it is shut off, there is a 30-second countdown delay since the fan continues to run for a time to dissipate heat and prolong the life of your heater. To make the heater more responsive to commands from the remote, please aim the remote control at the front of the heater. The UP button allows for temperature adjustment (No DOWN button).

PRECAUTIONS

• Before using it for the first time, please check that the voltage you are using matches the one required by the product nameplate.
• If the power cord is damaged, in order to avoid danger, it must be replaced by the manufacturer or the professional staff of the maintenance department.
• Do not use the product near objects that can be easily absorbed such as curtains, and avoid places where there are obstacles and instability around.
• This product is strictly prohibited to use in the environment with flammable and explosive materials, and the use environment should not exceed 30 degrees, and leave combustible materials at least 1 meter to prevent fire.
• When leaving or not used for a long time, please make sure to cut off the power and unplug the power supply.
• Make sure the machine is disconnected from the power supply when the power is off or moving.
• Please check the power cord and plug for damage before use.
• Do not bend or pull the power cord to avoid poor contact.
• When using the apparatus should be avoided on the sloping surface, should be placed on a flat surface to use and cannot be put down to use.
• Prohibit the use of touching the air outlet iron mesh, in order to avoid burns.
• Before pulling out the plug should first turn off the power, do not pull the power cord, should hold the plug head pull out.
• Do not use wet hands to pull the power plug, the risk of electric shock.
• Do not use this product to heat around the bathtub, nozzle or swimming pool.
• Electric heater should not be placed directly under the power outlet.
• When working, it is absolutely forbidden to insert hands or foreign objects into the body of the machine.
• When there is a strange smell or sound during use, please stop using it immediately and unplug it from the power supply.
• Do not use if the power cord is exposed or damaged.
• Children should be supervised to ensure that they do not play with the machine.
• The machine should not be used by people (including children) with physical, sensory and intellectual impairments or lack of experience and common sense, and should be used in the presence of a guardian who is able to provide adequate supervision and instruction on how to use the machine.
• Electric heating surface stains, use a soft cloth with soap to wipe clean, do not use gasoline or alcohol and other organic solutions, clean the machine first cut off the power, unplug the power.
• Do not use in high temperature, humid, dusty or volatile places such as acid and alkali oil.
• Do not spray pesticides and flammable sprays around the product.
• If there is a problem with the product, it is strictly forbidden to disassemble the machine by yourself, and the machine should be sent to a service point for repair.
• Do not use this heater with an external programmer, timer or any other device with automatic power on because the heater can cause a fire hazard if it is covered or incorrectly placed.
• Without supervision, children should not clean and maintain the appliance.
• This product is limited to use in the home or similar indoor locations.

Function Instructions

When using the unit, please plug it into a standard socket with the specified current and voltage.

• Plug in the power, press the mechanical switch button on the back, the machine enters standby mode.
• Touch the key, the product enters the power-on mode, the default natural wind. Press the  key again, the product enters the standby state, the fan delayed air supply 30 seconds.
• Touch the key, the product begins to oscillation left and right, and then touch to stop auto oscillation.
• Touch the key, the product set temperature intelligent switching gear.
• Touch the key to switch the product to  natural wind,  low heat,  high heat. The corresponding indicator lights up.
• Touch the key product timing settings, respectively 2H, 4H, 6H, 2H + 6H = 8H, 4H + 6H = 10H, 2H + 4H + 6H = 12H, a total of 6 time settings.

Remote Precautions

• Remote must be equipped with CR2025 twist button battery, when loading the battery, pay attention to the polarity must not be installed in reverse.
• When using the remote control, the front end of the remote control must be aligned with the receiving window (digital display screen) of the machine.
• Avoid direct sunlight on the receiving window, so as not to affect the effect of reception.
• Please keep the remote control in a safe place to avoid impact and dropping.
• When not in use for a long time, please take out the battery to avoid the battery leakage and damage to the remote control.
• When replacing the battery of the remote control, please replace it according to the assembly diagram on the back of the remote control.

Simple Troubleshooting

• Machine does not start: a. Please check whether the power cord plug into the socket; b. Whether the power switch on the back of the machine; c. Whether the power socket is connected to the power.
• Machine operation noise: check whether the machine is placed on the ground is balanced, whether shaking.
• Heating time is too short and on: check whether the air inlet and outlet are blocked (such as curtains, plastic bags, pieces of paper, etc.), eliminate the factors and then cool the machine and start again.
• After the above checks fail to exclude the fault, please feel free to contact us via email: support@primevolve.com. We will provide you the best solution according to your exact issue.

Storage and Maintenance

• Before cleaning, please turn off the power and unplug the power supply.
• Allow the machine to cool completely before wiping the outer surface with a wet soft cloth, and use a soft brush to brush the ventilation holes.
• After cleaning, wait until the machine is completely dry before powering on and using or putting into the original packaging, and place in a dry and ventilated environment.
• Do not rinse directly with water during the cleaning process to avoid damage to the machine.
• Do not use thinner, toluene, acidic detergent, alcohol and other chemical reagents to wipe the machine.

WARRANTY

We offer 1 year warranty, if any question or problem, please feel free to contact us via email: support@primevolve.com.

We will provide you the best solution according to your exact issue.

FAQs

Is its panel touchable or buttoned?****

It’s a touchable panel. You can use the touchable panel to operate all features: oscillating, 12H-Timer, 3 Modes, Power on/off, Temperature Up. Also, with a remote controller, you can remotely control the heat and oscillation settings from your bed or sofa.

It is UL certified ?****

Yes, this Primevolve SH02( YND-1200D ) heater is UL listed. If necessary, you can contact us via support@primevolve.com or Amazon message to get the UL certification report.

Is there a tilt turn off function? If it falls to the floor, will it auto turn off?****

Yes, this ceramic space heater will auto shut off once the tilt angle is over 15°.

Can this ceramic space heater be used on 220V or is it only 120V?****

This electric heater works only on 110-120V in the US.

Anything I need to pay attention to, use this heater at the first time?****

The air outlet is a little hot during use because ceramic heating element helps to heat faster and offer more energy, so please DO NOT touch or cover the air outlet during use.

Does it have a warranty?****

Yes, of course. We provide a 1-year warranty from the manufacturer. If any questions, please feel free to contact us via support@primevolve.com.

Is this product considered a heater or can it be used as a regular fan with no heat?****

We don’t suggest using this heater as a regular fan even though it has a fan feature. The fan is just for forcing out the heat and dissipating the heat of the air outlet.

Why is it recommended to be plugged into wall outlet instead of a powerstrip?****

Because the power generated by the heater is too intense for a strip.  The power of this space heater is 1500W, which is relatively higher than other small appliances. For a long time of usage, you need to make sure that the powerstrip is fit and reliable enough. For your peace of mind, please use a wall socket instead of a power strip during use.

Is it cordless?****

No, it’s not wireless. This ceramic space heater does not take batteries and it does have a cord to plug into an outlet.

Is this portable cordless heater too?****

No, Must be plugged in to work.

Can we get a Replacement remote if lost??****

Not sure, but I would email the seller; they seem responsive in my experience.

Is it fully assembled?****

Yes, Primevolve room heater SH02 is fully assembled. You can take this space heater out of package and warm your room.

Can we use it on a carpeted floor?****

Yes, of course, you can use this Primevolve SH02 electric heater on a carpeted floor. If any questions, please feel free to contact us via Amazon message or support@primevolve.com.

If there’s a power interruption will this heater come back on by itself or does have to be turned back on manually?****

The heater will power up but not in the heating mode. You would need to turn the heat, timer, fan and swing mode back on.

if you’re 1-2 feet away from it with nice heat on ya & then you power off, that extra 30 secs the fan runs–Is it cold air on you then for that time??****

Please don’t worry, because the air outlet is hot, 30 seconds of fan wind is only enough to dissipate the heat of the air outlet and will not let you feel the cold air. If any question, please feel free to contact us via support@primevolve.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>