Ponek M08F Portable Wireless Printers User Guide
- June 14, 2024
- Ponek
Table of Contents
Ponek M08F Portable Wireless Printers
PRODUCT INFORMATION
Computer Printing with Data Cable
- Open the link: m08f.phomemo.com
- Download the corresponding drive for your computer system.
- Windows
- Windows ARM
- Mac OS
- Linux
- Chrome OS
- Follow the above instructions to install the driver.
- Press and hold for 3s to turn on the M08F printer.
- Connect the printer to your computer with a Type-C data cable.
- Load the paper according to the prompt.
- Right-click the file and click the print button.
- Select M08F on your computer and start printing.
MOSF
Smartphone-controlled
- Get/install the Phomemo App.
- Press and hold for 3s to turn on the M08F printer.
- Turn on Bluetooth from phone settings.
- Connect the printer via Bluetooth in the Phoneme app.
- Load the paper according to the prompt
- Select the file in the Phomemo App to print.
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction
IC Warning
IC Caution:
Radio Standards Specification RSS-Gen, issue 5: This device contains license-
exempt transmitter(s)/receiver(s) that comply with Innovation, Science and
Economic Development Canada’s license-exempt RSS(s). Operation is subject to
the following two conditions: This device may not cause interference. This
device must accept any interference, including interference thatmay causee
undesired operation of the device.
RF exposure statement:
- The device has been evaluated to meet general RF exposure requirements.
- The device can be used in portable exposure conditions without restriction.
Scan the OR code to view more instructions.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>