PDP LVL50 Wireless Gaming Headset User Guide

: June 14, 2024
: PDP

Table of Contents

PDP LVL50 Wireless Gaming Headset
OVERVIEW
INSTALLATION
FCC
LIMITED WARRANTY
MORE INFORMATION
Read User Manual Online (PDF format)
Download This Manual (PDF format)

PDP LVL50 Wireless Gaming Headset

OVERVIEW

LVL50 Wireless Headset

Wireless USB Dongle

USB Cable

INSTALLATION

Setup/Pairing

A. Plug the dongle into the USB port and power on the headset. Both should pair automatically.
If the headset and dongle are not paired:
B. Press and hold a button on the USB Dongle until the LED blinks rapidly.
C. Press and hold the power button on the headset until it pairs with the USB Dongle (Solid LED).

Flip-to-Mute

A. Mic Boom up to mute.
B. Mic Boom down to unmute.
Audio Mode
C. The MODE button controls your headset’s
Audio Mode (1 beep = Pure Audio; 2 beeps
- Bass Boost).

PDP-LVL50-Wireless-Gaming-Headset-fig-5

Audio Controls
Adjust the volume dial on the right ear cup to the preferred audio level.

Charging
To charge, plug the USB cable into the headset Up to 16+ Hours of Battery Life

Pulsing LED = Charging
Solid LED = Charged
Low Battery Tone = Descending Tones every minute

Volume Settings

Check your audio settings to ensure your headset is selected as the assigned audio device.
To adjust your volume: Go to the PlayStation® 5 menu > Settings > Sound > Volume

3D Audio Settings

To enable 3D Audio: Go to the PlayStation® 5 menu > Settings > Sound > Audio Output >
Enable 3D Audio and turn it on

Microphone Settings
To adjust the microphone level: Go to the PlayStation® 5 menu > Settings > Sound > Microphone > Adjust the Microphone Level.

©2021 Performance Designed Products LLC. PDP, PDP Gaming and their respective logos are trademarks and/or registered trademarks of Performance Designed Products LLC. “ ”, “PlayStation”, “PS5”, “PS4”, and “PlayStation Shapes Logo” are registered trademarks or trademarks of Sony Interactive Entertainment Inc. All rights reserved. All other trademarks are the property of their respective owners. Manufactured and distributed under license from Sony Interactive Entertainment LLC

This product is manufactured and imported by Performance Designed Products Ltd
This symbol is known as the ‘Crossed out Wheelie Bin Symbol’. When this symbol is marked on a product or packaging, it means that the product should not be disposed of with your general household waste. Only discard electrical/electronic items in separate collection schemes, which cater to the recovery and recycling of materials contained within. Your co-operation is vital to ensure the success of these schemes and for the protection of the environment

To prevent possible hearing damage, do not listen at high volume levels for long periods

Battery Warning Words for lithium-ion battery

WARNING – BATTERY LEAKAGE

This product contains a rechargeable lithium-ion battery pack. Leakage of ingredients contained within the battery pack, or the combustion products of the ingredients, can cause personal injury as well as damage to your product. If battery leakage occurs, avoid contact with the skin. If contact occurs, immediately wash thoroughly with soap and water. If liquid leaking from a battery pack comes into contact with your eyes, immediately flush thoroughly with water and see a doctor.

To avoid battery leakage:
Do not expose the battery to excessive physical shock, vibration, or liquids.
Do not disassemble, attempt to repair, or deform the battery.
Do not dispose of the battery pack in a fire.
Do not touch the terminals of the battery or cause a short between the terminals with a metal object.
Do not peel or damage the battery label.

FCC

FCC AND IC STATEMENT FOR WIRELESS PRODUCTS

CAUTION:
Changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.

The equipment complies with FCC RF exposure limits set forth for an uncontrolled environment. The equipment must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment has been tested and found to comply with the limits for a Class B digital device, according to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help

FCC ID: X5B-051049R/T
This device complies with FCC radiation exposure limits set forth for an uncontrolled environment and it also complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

this device may not cause harmful interference, and
this device must accept any interference received, including interference that may cause undesired operation.

IC: 8814A-051049R/T
Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada,. To reduce potential radio interference to other users, the antenna type and its gains should be so chosen that the equivalent isotopically radiated power (e.i.r.p.) is not more than that necessary for successful communication.

This device complies with Industry Canada license-exempt RSS standard(s).

Operation is subject to the following two conditions:

this device may not cause interference,
this device must accept any interference, including interference that may cause undesired operation of the device.

LIMITED WARRANTY

Coverage and Term: PDP warrants that this product will be free from manufacturing defects for two years from the original date of purchase. Manufacturing defects are those defects in materials and/or workmanship, subject to final determination by PDP’s customer service department. This warranty applies only to original purchasers with a valid proof of purchase from an authorized PDP retailer that clearly shows the date of purchase.
Exclusive Remedy and Exclusions: The exclusive remedy for valid claims will be the replacement or refund of the product. This warranty does not cover defects caused by accidents, improper or abusive use of the product, unauthorized or improper modifications, repairs, or handling.
How to Get Service: Purchasers with product issues should not return the product to the store, but instead contact PDP’s customer service department first. You can contact PDP customer service by phone at 1-800-331-3844 (US and Canada only), Monday to Friday from 8 AM to 6 PM PST. International customers can contact us by phone at +442036957905. You can always reach us, 24/7, by visiting support.pdp.com and clicking the “Submit a Request” button top right of the page to open a support ticket. Inquiries are typically answered within 24 business hours.
Your Rights Under Applicable Law: This warranty does not affect the legal rights of customers under the applicable state, provincial, or national laws governing the sale of consumer goods.
Additional Information for Australian Consumers: PDP products come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. The benefits given to you under our express warranty are in addition to other rights and remedies you have under the Australian Consumer Law and other laws.

Hereby, Performance Designed Products, declares that this device complies with the essential requirements and other relevant provisions of Directive 2014/53/EU. The declaration of conformity may be consulted at www.pdp.com/en/sitemap