ibiza SOUND STREET-WAVE 400W Stand Alone Portable Sound Box Instruction Manual

STAND-ALONE PORTABLE SOUND BOX 400W with BLUETOOTH, USB, MICROSD, TWS & REMOTE
CONTROL
ENCEINTE ACTIVE AUTONOME 400W avec BLUETOOTH, USB, microSD, TWS
& TELECOMMANDE
Ref.
STREET-WAVE MANUAL

STAND-ALONE ACTIVE BOX 400W
WITH BLUETOOTH, USB, MICROSD, TWS & REMOTE CONTROL

OPERATING INSTRUCTIONS

Congratulations to the purchase of your new speaker.
EXPLANATION OF SIGNS
Accordance with the requirements of UK standard
The product is for indoor use only
This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable  reuse of material resources.
To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.

IMPORTANT SAFETY INSTRUCTIONS AND DANGER WARNINGS

• Please read the manual carefully and keep it for future reference.
• The unit shall be connected to a power supply only of the type described.
• To reduce the risk of fire or electrical shock, do not expose this unit to rain or moisture.
• The appliance is approved for operation in dry, closed rooms only. Do not operate the device nearby water, such as in bathrooms or nearby swimming pools.
• The appliance may not be exposed to extreme temperatures (< +5°C / > +35°C) in operation.
• The appliance may not be subject to strong vibrations or heavy mechanical strain. Unplug the unit from the wall socket when it is not to be used for a long period of time.
• Adequate care shall be taken so that foreign objects do not fall, or liquids are not spilled into the enclosure through openings. The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.
• Do not place on the apparatus as naked flame source, such as lighted candles.
• Do not use the unit in a tropical climate. Only for use in moderate climates.
• A minimum distance of 0.5m around the unit must be kept to ensure sufficient ventilation and avoid overheating.
• All safety instructions and warnings must be adhered to. They are part of the manual and must be kept with the manual.
• Any guarantee claims are rendered invalid if damage occurs due to non-observance of these operating instructions. We assume no liability for any consequent damage.
• Unauthorized conversions and/or modifications of the appliance are not permitted for safety and licensing reasons (CE).
• Do not remove the cover or back, as there are no user-serviceable parts inside.
• In the event of a serious operating problem, stop using the unit immediately. Never try to repair the unit by yourself. Repairs carried out by unskilled people can lead to damage or malfunction. Please contact the nearest authorized technical assistance centre. Always use the same type of spare parts.
• DISCONNECT DEVICE: Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.

CHARGING THE BATTERY

Connect the mains adaptor into an AC outlet and the built-in battery will start charging, no matter if the speaker is on or off.
IMPORTANT NOTE ON LEAD-ACID BATTERIES

1. PRIOR TO USING THE UNIT FOR THE FIRST TIME, PLEASE CHARGE FULLY THE BATTERY WITHOUT ANY INTERRUPTION.
2.  CHARGE THE BATTERY REGULARLY AFTER EACH USE. DON’T WAIT UNTIL IT IS DISCHARGED!
3. DON’T ALLOW THE BATTERY TO DISCHARGE COMPLETELY! ONCE THE BATTERY IS FULLY DISCHARGED, THE CURRENT DRAIN FOR RECHARGING WILL BE SO HIGH THAT IT WILL DAMAGE THE CHARGER AND/OR THE POWER SUPPLY OF THE UNIT.
4. IF YOU DON’T USE THE UNIT FOR A LONGER PERIOD OF TIME, PLEASE CHARGE THE BATTERY COMPLETELY AT 100% AND CHECK/CHARGE IT ONCE PER MONTH OTHERWISE THE BATTERY WILL BE OUT OF USE. THE LIFE TIME OF THE BATTERY DEPENDS ON THE OBSERVANCE OF THESE RECOMMENDATIONS.

BATTERIES ARE NOT COVERED BY THE WARRANTY
WE CANNOT BE HELD RESPONSIBLE FOR DAMAGED BATTERIES FURTHER TO THE NON- OBSERVANCE OF THESE BASIC RULES.

TOP PANEL DESCRIPTION

1. AUX input
2. USB inputs: For playing music
3. TF /microSD card input
4. Press to disconnect any device that was paired with STREET-WAVE. Long press to switch into Bluetooth mode from any other mode
5. TREBLE/BASS: adjusts the high/low frequencies. Press the button and bA (bass) or Tr(treble) is displayed. Rotate the wheel (6) to adjust the bass or treble of the sound output from -10 to +10. Long press to activate the Mega Bass function.
6. VOLUME Rotate to adjust the overall volume.
7. Light switch: Press to cycle through the various light effects and switch the light effect off.
8. REPEAT: Press this button to repeat the track on your USB/ TF card
9. PREVIOUS SONG : Press this button to move to the previous track.
10. PLAY/PAUSE MUSIC ▶ǁ: Press this button to pause or play.
11. NEXT SONG : Press this button to move to the next track.
12. MODE (cycle through USB/SD/BLUETOOTH).

DESCRIPTION OF REAR PANEL

1. AUDIO output for connection to other devices
2. Power input
3. MIC1/MIC2 connector
4. ON/OFF switch

REMOTE CONTROL
Please operate the remote control within a distance of 6m and 30° between the remote and the appliance. Aim the remote at the sensor. Remove all obstacles between the remote and the sensor.
The remote control might not work properly if the sensor is exposed to strong sunshine.
If the remote control doesn’t work properly, please check the batteries

INSTALLING THE BATTERIES IN THE REMOTE CONTROL
Remove the battery cover from the back of the remote control as shown and insert 2x AAA size batteries ensuring correct polarity

RECOMMENDATIONS FOR BATTERIES

** This symbol indicates that used batteries should not be disposed of with household waste but deposed correctly in accordance with your local regulations.. Batteries shall not be exposed to excessive heat such as sunshine, fire or the like. When the internal batteries are not to be used, remove them to avoid damage caused by battery leakage or corrosion.
ATTENTION: Danger of explosion if battery is incorrectly placed. Only replace by the same or equivalent type.
WARNING** :Do not swallow the battery. Danger of chemical burns. Keep new and old batteries out of the reach of children. If the battery compartment doesn’t close properly, stop using the product and keep it out of the reach of children. If you are in doubt whether the batteries have been swallowed or introduced into any other part of the body, contact immediately a doctor.

REMOTE CONTROL

Mute
Mode key: (Choose from AUX/USB/TF/BLUETOOTH)
0-9 keys: Access directly the file number
ECHO + / ECHO -: Increases / reduces the echo effect on the microphone
AUX: Press to select AUX mode
EQ: Sound mode key (Choose from rock, pop, jazz and etc.)
BT: Press to select Bluetooth mode
PREVIOUS : Previous track
PAUSE/PLAY : Press to pause and resume play.
NEXT : Next track
TREBLE + / TREBLE -: Increases / reduces the high frequencies
MIC VOL + / MIC VOL -: Increases / reduces the volume of the connected mic
VOL+ / VOL-: Increase/reduce the overall volume
LIGHT SW: Press to cycle through the various light effects
BASS + / BAbSS -: Increases / reduces the low frequencies
M.TRE +/M.TRE+: Increases / reduces the high frequencies of the microphone
M.BASS +/M.BASS+: Increases / reduces the low frequencies of the microphone
MIC PRI: Press to reduce the volume of all other input sources while you are talking into the microphone
REPEAT: Repeat one/all tracks.
REC: Press to record your voice on USB or TF
FOLDER: Press to select a folder on your USB or TF card that contains the songs you want to play

BLUETOOTH PAIRING PROCEDURE

• Press MODE or BT button on the unit or the remote control until BT is displayed.
• Put the cell phone within 3 meters
• Activate the BT search function on your cell phone to search for the BT device. Please refer to the user manual for details
• Select STREET-WAVE in the list of found devices.
• Shortly press the PLAY/PAUSE button to play or pause the music. Shortly press the “ ” or “ ” button to select the previous or next track.

AUX MODE:
Press the MODE button on the unit until AUX is selected, or the AUX button on the remote control. Play the music of the device connected to the AUX input. USB
MODE:

• Press MODE to select “USB” and insert the USB device. The unit will automatically read and play the music in the USB device.
• Press “ ” button shortly to pause or play.
• Shortly press “ ” button to go to the previous song.
• Shortly press “ ” button to go to the next song.

Please note that the 2 USB inputs CANNOT be used at the same time. Unplug the USB device first before you connect another USB device to the other input.
MICRO-SD MODE:

• After start up, press MODE to select “SD” and insert the microSD card. The unit will automatically read and play the music on the microSD card.
• Press “ ” key shortly to pause or play the music.
• Shortly press “ ” key to skip to the previous track.
• Shortly press “ ” key to skip to the next track.

TWS PAIRING MODE:

• Make sure both speakers are OFF.
• Go to your phone’s Bluetooth interface and make sure that it is not connected to either of the speakers. If your phone is connected, remove the speakers from the list of available devices.
• Turn both speakers ON, press the MODE button on both speakers. The word « BLUE » should appear on both LCD screens and flash intermittently.
• Press the « » button on either one of the speakers for 5 seconds. Both units will enter pairing mode.
• One of the units will show the word « BLUE » on the LCD display. This is the master unit and will act as the left channel, while the other one will be the slave unit and will act as the right channel.
• Go to your phone’s Bluetooth interface and select « STREET-WAVE » from the list of available devices. If pairing is successful, the word BLUE on the master unit will stop flashing.
• To disconnect the speakers, select any other mode on either one of the speakers.

TROUBLESHOOTING

2: Volume knob in the lowest position
3: USB/SD no plug| 1: Connect a Line signal 2: Adjust volume
3: Insert a USB/SD Card
Distortion of sound| 1: Volume too loud
2: Audio file error| 1: Reduce volume
2: Check and change the audio file
3: Adjust Bass/Treble via “MENU” and “Main volume”
No sound from the Microphone| 1: Microphone socket not fully plugged in
2: Microphone switch is not on
3: Microphone volume too low| 1: Completely plug in the microphone socket 2: Power on microphone
3: Adjust microphone volume
No sound from the USB/SD card| 1: incompatible song format 2: Illegal copy causes failures
3: USB/SD Card not inserted properly| 1: songs format should be MP3/WMA 2: Power off, then power on
3: Insert USB/SD card properly
Speaker makes noise| 1: Wired Microphone too close to the speaker
2: Wired Microphone is switched on but not in use
3: Microphone volume too loud 4: Mobile phone too close to the speaker
5: Too close to the equipment which interferes with the speaker| 1: Do not let the wired microphones head point at the speaker
2: Turn off wired microphone if not in use
3: Reduce the microphone volume
4: Keep mobile away from the speaker during calls 5: Keep the speaker away from other sources of interference
Bluetooth consecution fails| 1: Bluetooth disconnected
2: Bluetooth connected but no voice
3: Bluetooth distance too short| 1: Find the right device Name or press “MENU” But- ton to restore factory settings.
2: Confirm if you are connected to the right device Name
3: Try to keep away from barriers, such as walls, glasses…etc

SPECIFICATIONS

Max. power …………………………………………………………………400W
Consumption …………………………………………………………………..50W
Woofer ……………………………………………………………………………..8″/20cm
Tweeter ………………………………………………………………………3″/7.5cm
Freq. range ………………………………………………………………….50Hz-18kHz
S/N ratio …………………………………………………………………………≥70dB
Power supply …………………………………………. 15V? 3.6A via supplied 100-240V~ (±10%) 50/60Hz adaptor
Built-in battery ……………………………………………………..Lead-acid 12V? 4.5Ah
Charging time …………………………………………………………………….5.5 hours
Playing time ……………………………………………………………………….3-5 hours
Bluetooth frequency band………………………………………….2402-2480MHz
BT max. RF emission power ……………………………………………………..0.50dBm
Dimensions ……………………………………………………………….290 x 280 x 545mm
Weight …………………………………………………………………11.5kg EU Declaration of Conformity

Hereby we,| LOTRONIC SA
Avenue Zénobe Gramme, 9
1480 SAINTES
Belgique
+32.2.390.91.91
---|---

Certify and declare under our sole responsibility that the following product:
Trade name: IBIZA
Product name: Portable speaker
Type or model: STREET-WAVE
Conforms to the essential requirements of RED directive 2014/53/EU, ErP directive 2009/125/EC, commission regulation (EC) N° 2009/1782, the 2011/65/EU RoHS directive and the Commission
Delegated Directive (EU) 2015/863 based on the following applied:
EN 62368-1 : 2018
EN 62479 : 2010
EN 50663 : 2017
EN 55032 : 2015 + A11 : 2020
EN 55035 : 2017 + A11 : 2020
EN 61000-3-2 : 2014
EN 61000-3-3 : 2013
ETSI EN 300 328 V2.2.2 : 2019-07
ETSI EN 301 489-1 V2.2.3 : 2019-11
ETSI EN 301 489-17 V3.2.4 : 2020-09
EN 50563 : 2011 + A1 : 2013
IEC 62321-3-1 : 2013
IEC 62321-4 : 2013 + AMD1 : 2017
IEC 62321-5 : 2013 Ed. 1.0
IEC 62321-6 : 2015 Ed. 1.0
IEC 62321-7-1 : 2015 Ed 1.0
IEC 62321-7-2 : 2017 Ed 1.0
IEC 62321-8 : 2017
Place and date of issue:
Saintes ( Belgium ), on 10/01/2022
Manuel De Sousa
Quality Manager

View the product on our website
https://www.lotronic.net/STREET-WAVE
Imported from China by LOTRONIC S.A.
Avenue Zénobe Gramme 9
B-1480 Sainteswww.ibiza-light.com
©Copyright LOTRONIC 2022

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>