ibiza SOUND MIX500 2 Channel Mixer Instruction Manual

June 8, 2024
ibiza SOUND

ibiza SOUND MIX500 2 Channel Mixer Instruction Manual
ibiza SOUND MIX500 2 Channel Mixer

IMPORTANT SAFETY INSTRUCTIONS AND DANGER WARNINGS

Accordance with the requirements of CE standard
Class II protection without earth connection
The product is for indoor use only

  • Read all safety and operating instructions prior to using the device for the first time and keep them for future reference.
  • All warnings on the device and in the operating instructions should be adhered to.
  • Unplug the device from the wall outlet before cleaning. The device should be cleaned only with a dry cloth. Avoid solvents or other cleaning detergents.
  • Do not use the device near water for example, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool and the like.
  • Ventilation slots and openings in the cabinet are provided for ventilation and to ensure reliable operation by avoiding overheating. These openings must not be blocked nor covered.
  • Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them. Pay particular attention to cords at plugs, convenience receptacles and the point where they exit from the appliance.
  • For added protection of the device during a thunderstorm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the cable system. This will prevent damage to the appliance due to lightning and power-line surges.
  • Never push objects of any kind into the appliance through openings as they may touch dangerous voltage points or short-circuit parts that could result in a fire or electric shock. Never spill liquids of any kind on the appliance.
  • Do not attempt to service the appliance yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
  • When spare parts are required, be sure the service technician has used replacement parts specified by the manufacturer or that the spare parts have the same specifications as the original parts. Unauthorized substitutions may result in fire, electric shock or other hazards.
  • Keep away from heat sources such as radiators, heat registers, stoves or other appliances (including amplifiers) that produce heat.

DISCONNECT DEVICE

Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.

CHANNEL CONTROL SECTION:

  1. GAIN control: Adjustment of the input signal level for channel 1 & 2
  2. TREBLE control: Adjustment of the high frequencies for channel 1 & 2
  3. BASS control: Adjustment of the low frequencies for channel 1 & 2
  4. MIC volume control:
  5. HEADPHONE volume control
  6. MASTER volume control
  7. Crossfader: Set the crossfader to the left side to mute the LINE 2 input signal or move the crossfader to the right side to mute the LINE 1 input signal. If the crossfader is in the middle position, both LINE 1 input signal & Line 2 input signal will be mixed and sent to OUTPUT Jacks
  8. POWER LED: Lights up when the unit is powered.

REAR PANEL CONTROLS:

  1. 12V Power supply: Connect the adapter here

  2. Master output: Connect this RCA output to the RCA input of an amplifier or active speaker

  3. REC output: Connect this RCA output to the RCA input of a tape recorder, amplifier or active speaker.

  4. Line 2 RCA input: Connect the Line 2 Signal here

  5. Line 1 RCA input: Connect the Line 1 signal here
    Rear Panel controls
    FRONT PANEL CONNECTORS

  6. MIC input: Jack 6.35mm. Connect the microphone here

  7. Headphone output: Jack 6.35mm. Connect the headphone here
    Front Panel Connectors

SPECIFICATIONS

Input voltage………………………………………..12V 500mA
Weight ………………………………………………….0.55kg
Dimensions …………………………………………165 x 100 x 60mm

Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your local authorities or your dealer about the way to proceed.

LOTRONI.0 SA
Av. Zenobe Gramme 9 1480 Saintes – Belgium
Tel. +32.2.390.91.91
Fax +32.2.390.93.19
infbalotronic.net
www.lotronic.com

View the item on our website
QR Code

Any problem or question?
Contact us on facebook
QR Code

Imported from China by LOTRONIC S.A.
Avenue Zénobe Gramme 9
B-1480 Saintes

www.ibiza-light.com

©Copyright LOTRONIC 2021

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals