ASAHOM S1040 Permanent Outdoor Lights User Manual

ASAHOM S1040 Permanent Outdoor Lights User Manual

Safety Instructions

• This product is rated as IP67 Waterproof, it can be used outdoors but be immersed in water is not recommended.
• The control box and power adapter are both rated as IP65. They can be used outdoor but cannot be immersed in water.
• To prevent the light string from falling down, ensure it is installed with both the adhesive tape and the clips
• Tighten up the waterproof cap before using the light
• Do not allow children to assemble and install this product
• Avoid installing this product near major heat sources or other dangerous sources.
• Avoid using other non-standard adapters for this product External dimmer cannot be used with this product
• Use this product with the provided power adapter only.

Introduction

Thank you for choosing the ASAHOM RGB Permanent Outdoor Lights. This product has an P67 water-resistant rating, making them deal for outdoor use. You can choose from 61 scene modes and 16 million colors o decorate house via Smart Life app.

What You Get

At a Glance

a.Power Adapter
b.Control Box
c.Permanent Lights
d.Waterproof Connector

• Press to tum on or off,
• Press and hold for 5 seconds to reset

Pairing Your Light with the Smart Life App

What You Need:

• A Wi-Fi router supporting the 2.4GHz and 802.11 b/g/n bands (5GHz is not supported.)
• A smartphone or tablet running iOS 8.0 (or above) or Android 4.3 (or above)
• Before installation, connect each string light and then plug it into power to make sure every string light can work properly

1. Download the Smart Life app from the App Store (iOS devices) or Google Play (Android devices)
2. Tum on the Bluetooth on your smartphone. And 2.4GHz WiFi has connected.
3. Keep the distance between the smartphone and the control box within 2m/6.6ft when connecting.
4. Open the app, tap the icon in the top right comer, the device will automatically appear in the scan list.
5. Tap the device icon and follow the on-screen instructions to complete pairing

Controlling the Light with Your Voice

1. Open the app, tap the Me icon
   

2. Tap the Alexa/Goggle Assistant icon, and then click connect Alexa/Google Assistant to bind your Smart Life App account to your Alexa/Google Assitant account.
   

3. After the operation, you can voice control via Alexa/Google Assistant
   

Refreshing Light Segment

Add or reduce the number of light segment, please refresh the number of light segments via the app. After refreshing, the light string can be controlled normally. The refresh steps are as follows:

Specifications

How to Use

**Adjust Color

** After selecting, click on the color wheel to adjust the whole string of lights to the same color.
After selection, click on the color wheel, then click on the light bulb, you can apply the color to the selected light bulb

After selection, click on the light bulb to tum off the light of the selected light bulb

Troubleshooting

1. Can we connect more than 6 light strings to make it longer
   You can connect up to 1501t (9 string ight sections) at maximum

2. Can we cut them and reattach?
   Each 100ft contains 6 x 16,67/t segments. You can detach hem and use the rest light strip.

3. How do we install on different eaves/peaks of roof lines?
   You can use the 246t extension cables that comes with the package.

4. The adhesive tape is not strong enough.
   Use the clps to secure the strp lights firmly during Installation

5. APP can’t scan
   a.Ensure the Bluetooth on
   b. Your smartphone may
   Try using a different your smartphone has been turned on be incompatible with Smart Life app. smartphone then reconnect.
   c. Power the light and your smartphone’s Bluetooth off then on then try again
   d. Ensure that your smartphone is within 2m/6.6ft of the light when scanning
   e. Clear any obstructions that are between the light and your smartphone

6. Cannot connect to WiFi
   a. 5GHz network is not supported. Please set the router to 2.4GHz and then reset it
   b. Connect your smartphone to Wi-Fi and check whether the network works well.
   c.Make sure you have entered the correct Wi-Fi name and password.
   d. Change your Wi-Fi password to a brief one.8 numbers and letters are suggested.
   e. Connect hotspot in your phone to the lights and check whether the router works with the lights.

7. The light do not display the selected colorfully/Some LED beads donotlight up.
   Please contact the ASAHOM support team via Amazon Message Center for rapid product replacement

8. Cannot connect to Alexa.
   a.Pullout every connective part of the lights and firmly re-conneot them.
   b.Re-connect your smartphone 1o Wi-Fi
   c. Plug out the adapter port and re-plug in

FCC and IC Radiation Exposure Statement

This equipment complies with FCC and IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. la distance entre l’utilisation et l’appareil ne doit pas être inférieure à 20 cm.

This Class B digital apparatus complies with Canadian ICES-005. Cet appareil numérique de la classe B est conforme à la norme NMB-005 du Canada.

1. Reorient o relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment nto an outlet on a circuit different from that to which the receiver is connected.
4. Consult the dealer o an experienced radio/TV technician for help.

FCC and ISED Canada Statement

This device complies with Part 15 of the FCC Rules and Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules,

‘These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures:

Customer Service

Warranty 36-Month Limited Warranty
Support: Lifetime Technical Support
Email: [email protected]

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>