ASAHOM S1025 LED Bulb String Lights User Manual

ASAHOM S1025 LED Bulb String Lights

Introduction

Thank you for choosing the ASAHOM LED Bulb String Lights. This product has an IP65 water-resistant rating, making them ideal for outdoor use. You can adjust the brightness and set up a timer through the Smart Life app.

At Glance

Installing Your Device

Connect the string lights and solar module together as shown below

Hang the light bulbs onto the rope using the hook.

The adapter is not waterproof. Exercise caution when using the adapter outdoors.

Pairing Your Device with the Smart Life App

What You Need:

• A smartphone or tablet running iOS 8.0 (or above) or Android 4.3 (or above).
• Make sure the device Power button has been pressed.

1. Download the Smart Life app from the App Store (iOS devices) or Google Play (Android devices).

2. Turn on the Bluetooth on your smartphone.

3.  Keep the distance between the smartphone and the control box within 25m(82ft)

4. Open the app, tap the “+” icon in the top right corner , the device will automatically appear in the scan list.
   Repeat the above part or click this icon to enter the automatic scan again

5. Tap the device icon and follow the on-screen instructions to complete pairing.

How to use

Adjust Color

• After selecting: click on the color wheel to adjust the whole string of lights to the same color.
• After selection: click on the color wheel, then click on the light bulb, you can apply the color to the selected light bulb.
• After selection: click on the light bulb to turn off the light of the selected light bulb.

Troubleshooting

1. APP can’t scan the device
   • Ensure the string lights are powered on.
   • Confirm Bluetooth on your smartphone is enabled.
   • Position your smartphone close to the control box, then try again
   • If it still fails to scan, press and hold the button for 5 seconds, white light flashing and try again.
2. Can’t connect to WiFi
   • Confirm your home WiFi is 2.4GHz and you entered the correct password during the connection.
   • Position your smartphone close to the control box
   • Press and hold the button for 5 seconds, re-add the device after the light starts to flash.
3. Some of the bulbs do not work Unplug the adapter, then plug it in again. If the problem persists, please contact Customer Service
   • Unplug the adapter, then plug it in again.
   • If the problem persists, please contact Customer Service.

Specifications

• Input: ( Adapter) AC 100-240V 50 / 60Hz 0.8A MAX
• Output: (Adap ter) DC 12V,2A
• Color: RGBW
• Water Resistance: IP65 (String Lights)
• Wireless protocol: WiFi 2.4GHz 802.11 b/g/n
• Working Temperature: -20+50°C / -4+122°F
• Length: 96ft / 30bulbs

Compliance Information

EU Compliance Statement:
Shenzhen Shimu Tech Co.Ltd.hereby declares that this device is in compliance with the essential requirements and other relevant provisions of the Directive 2014/53/EU. EU contact address:

eVatmaster Consulting GmbH
Bettinastr. 30 60325 Frankfurt am Main, Germany contact@evatmaster.com

UK Compliance Statement

Shenzhen Shimu Tech.Co.,Ltd.hereby declares that this device is in compliance with the essential requirements and other relevant provisions of the Radio Equipment Regulations 2017 A copy of the UK Declaration of Conformity is available online at https://asahom.myshopify.com

Environmentally friendly disposal

Old electrical appliances must not be disposed of together with the residual waste,but have to be disposed of separately. The disposal at the communal collecting point via private persons is for free.The owner of old appliances is responsible to bring the appliances to these collecting points or to similar collection points.With this little personal effort,you contribute to recycle valuable raw materials and the treatment of toxic substances.

FCC and ISED Canada Statement

This device complies with Part 15 of the FCC Rules and Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

1. This device may not cause harmful interference,and
2. This device must accept any interference received,including interference that may cause undesired operation

These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates uses and can radiate radio frequency energy and,if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.However,there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on,the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Shenzhen Shimu Technology Co., Ltd.
Room 1933, Oriental Science and Technology Building, No. 16, Keyuan Road, Science and Technology Park Community, Yuehai Street, Nanshan District,
Shenzhen,China asahom.service@outlook.com

References

• Tech.co | Technology News, Reviews and Advice Guides

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>