HOTO lite Rechargeable LED Flashlight User Manual

HOTO lite Rechargeable LED Flashlight

Product Information

Specifications

• Diffuser: Yes
• Focus Ring: Yes
• Main Switch: Yes
• Strobe/SOS Switch: Yes
• Hook: Yes
• Type-C Charging Port: Yes

Product Usage Instructions

How to Use

Focusing

Push the focus ring up and down to achieve the effect of focusing and flooding.

Main Switch

• Daily use: short press to turn it on (low light mode by default). Short press again to adjust to medium light mode; again to high light mode; and again to shut it down. Repeat the operation.
• During charging: Short press to turn it on to low light mode; short press again to shut it down. Repeat the operation.

Strobe/SOS Switch

• Short press to turn on the strobe mode; short press again to switch to SOS mode; short press again to shut down; Repeat the operation.
• The strobe mode : In this mode, high-frequency flashing and strong light stimulation can be used to disturb the line of sight of any potential perpetrators for defense.
• SOS mode : In this mode, the flashlight automatically flashes with three dits, three days, and three dits to signal for help to the outside world.

Indicator Status

• The battery is above 60%: green light is on.
• The battery is between 30%-60%: the orange light is on.
• The battery is between 10%-30%: red light is on.
• The battery is less than 10%: red light flashes.
• (Attention: After the red light flashes for a while, the main lamp of the flashlight will flash and be forced to turn off in about 2 minutes. In that case, please charge the device.)

Charging Status

• Charging: red light breathes; Fully charged: green light is on.
• This flashlight is equipped with a Type-C charging port and a USB charging cable is included.

General Power Tool Safety Warnings

• Safety matters: Please use the tool properly as guided in this document.
• Maintenance service: This product cannot be disassembled. Only the maintenance personnel authorized by our company can repair the product. Please do not repair it yourself to avoid possible harm.

Charging instructions

1. Only use the charger that is in line with the charging parameters of the tool for charging.
2. If the status indicator does not display normally when it is not used for a long time, please continue to charge for 30 minutes and check it again.

Instructions for Use

1. This product can emit strong light. Please avoid having it emit direct light to human, animal eyes, and optical equipment lenses.
2. In order to reduce the risk of harm, children should use the flashlight when with their parents.
3. To reduce the risk of electric shock, do not put the tool in water or other liquids.
4. Do not place or store the tool where it may fall into the bathtub or sink.
5. After the strobe mode is turned on for a long time, the focus ring may generate a high temperature. To reduce the risk of burns, please do not touch it.

General Malfunction and Troubleshooting Methods

• Issue: Press the main switch or strobe/SOS switch, and the red light flashes.
• Resolution: Please charge the device as the battery might be low. If the issue persists, contact our customer support for further assistance.
• Issue: Press the main switch or strobe/SOS switch, and the flashlight does not light up.
• Resolution: Check if the battery is properly inserted and charged. If the issue persists, contact our customer support for further assistance.
• Issue: The indicator light on the main switch does not light up during charging.
• Resolution: Ensure that the charging cable is securely connected to the Type-C charging port. If the issue persists, contact our customer support for further assistance.

FAQ

Q: Where can I find more information about HOTO flashlight Lite?

• A: Stay tuned to our social media (@hoto_official) for updates and additional information about our products.

Product Overview

• Read this manual carefully before use, and retain it for future reference.
• Thank you for using HOTO flashlight Lite

1. Diffuser
2. Focus Ring
3. Main Switch
4. Strobe/SOS switch
5. Hook
6. Indicator Light
7. Type-C charging port

How to Use

Focusing

• Push the focus ring up and down to achieve the effect of focusing and flooding.

Main Switch

• Daily use: short press to turn it on (low light mode by default). Short press again to adjust to medium light mode; again to high light mode; and again to shut it down. Repeat the operation.
• During charging: Short press to turn it on to low light mode; short press again to shut it down. Repeat the operation.

Strobe/SOS switch

• Short press to turn on the strobe mode; short press again to switch to SOS mode; short press again to shut down; Repeat the operation.
• The strobe mode: in this mode, high-frequency flashing and strong light stimulation can be used to disturb the line of sight of any potential perpetrators for defense.
• SOS mode: in this mode, the flashlight automatically flashes with three dits, three dats, and three dits to signal for help to the outside world.

Indicator status

Operating status

• The battery is above 60%: green light is on.
• The battery is between 30%-60%: orange light is on.
• The battery is between 10%-30%: red light is on.
• The battery is less than 10%: red light flashes. (Attention: After the red light flashes for a while, the main lamp of the flashlight will flash and be forced to turn off in about 2 minutes. In that case, please charge the device.)

Charging status

• Charging: red light breathes;
• Fully charged: green light is on.
• This flashlight is equipped with a Type-C charging port, and a USB charging cable is included.

General Power Tool Safety Warnings

Safety matters

Correct use
Please use the tool properly as guided in this document.
Maintenance service
This product cannot be disassembled. Only the maintenance personnel authorized by our company can repair the product. Please do not repair it yourself to avoid possible harm.

Charging instructions

1. Only use the charger that is in line with the charging parameters of the tool for charging;
2. If the status indicator does not display normally when it is not used for a long time, please continue to charge for 30 minutes and check it again.

Instructions for use

1. This product can emit strong light. Please avoid having it emit direct light to human, animal eyes, and optical equipment lenses;
2. In order to reduce the risk of harm, children should use the light when with their parents;
3. To reduce the risk of electric shock, do not put the tool in water or other liquids;
4. Do not place or store the tool where it may fall into the bathtub or sink;
5. After the strobe mode is turned on for a long time, the focus ring may generate a high temperature. To reduce the risk of burns, please do not touch it.

Warning

• Please use a charger that is in line with the charging parameters of the tool for charging. Other types of chargers and accessories may violate the product warranty and may cause danger.
• 15 minutes after the highlight mode is turned on, the temperature will increase by about 20°C. For users who are sensitive to temperature, please implement heat insulation measures. （After 25 minutes, the temperature will slowly decrease.）
• After the product detects that the battery reaches 45°C, it will trigger the charging protection function and stop charging. The recommended charging environment temperature is 0℃-30℃.

General malfunction and troubleshooting methods

Specifications

• Model: QWSDT001
• Item Dimensions: 164.5x 30 x 30 mm
• Net Weight: Approx.160 g
• Input: 5V 1A
• Battery Type : Lithium-ion battery
• Battery Capacity: 2600 mAh
• Rated Voltag e: 3.65V
• Charging Time: Approx.210 min

Main switch three-mode parameters

• Manufactured by: Shanghai HOTO Technology Co., Ltd.
• Address: Building 45, No.50 Moganshan Road, Putuo District Shanghai, China
• Stay tuned to our social media ( @hoto_official )

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>