JM Zengge Lighting Co Ltd 2BDYX-ZJWBL Smart LED Bulb User Manual
- June 1, 2024
- JM Zengge Lighting Co Ltd
Table of Contents
JM Zengge Lighting Co Ltd 2BDYX-ZJWBL Smart LED Bulb
Product Information
Specifications
- Compliance: Part 15 of FCC Rules
- Condition 1: Device should not cause harmful interference
- Condition 2: Device must accept any interference received
FAQ
- Q: What should I do if the device is causing interference to other equipment?
- A: If you notice the device causing interference, try repositioning it or adjusting its settings. Ensure it is not placed near sensitive equipment that could be affected.
- Q: Can I make modifications to improve the device’s performance?
- A: No, any changes or modifications not approved by the responsible party for compliance could impact the device’s compliance and void your authority to operate it.
Download Surplife App
- Download the “Surplife” APP from the Apple Store and Google Play Store, or scan the QR code.
FAQ
Scan the “Instruction” QR code to read the electronic manual. Or enter the APP
“FAQ” to learn more.
Parameters
- 5 Channels: RGB+CCT
- Lamp Socket:E26/ E27/ B22
- Power& Voltage:7W 100- 240V, AC
- 9W/ 15W
- 100-130V, AC
- 10W/ 15W 190- 240V, AC
- Color Temperature: 2700K-6500K
- Working Temperature: – 20~45°C
How to connect smart devices via WiFi?
- turn on the device.
- Enter the “Surplife” APP, tap “Add Device” or click “+” at the top right corner.
- Tap the device on the list, then select your WiFi network, enter the password, and done!
How to reset the factory setting?
Turn on and off the bulbs 5 times in a row, not too fast, until the bulbs
start to flash, that means reset is completed
How do I connect to Amazon Alexa?
Tips
- Please rename your device in the Alexa app and make sure there is a device on the list.
- Check whether the device is” Cloud Online”.
Step 1: Click the device icon > tap the upper right corner “…” > Device Information > Cloud “online”
Step 2: Link with Alexa Directly
- Enter the ” Profile” page, then click the” Alexa” icon.
- Enter the Login Page, sign in to your Amazon Alexa account, then click is “Link Now”.
Step 3: Send commands to your Alexa
Supported voice commands:
- Turn on/ off < light name>.
- Dim < light name >.
- Brighten < light name >.
- Set < light name > to [0-100%].
- Turn < light name > to [color].
Supported Color Options:
- Blue, Crimson, Cyan, Fuchsia, Gold, Green, Lavender,
- Lime, Magenta, Orange, Purple, Red, Salmon, Teal,
- Sky Blue, Turquoise, Violet, Yellow.
For Scenes:
- You can activate scenes by following voice commands:
- Alexa, activate (scene name,.
- Alexa, turn on {scene name}.
Notes
- If Alexa can’t control your light, please check whether the light is Cloud Online.
- Please check the device name you are calling is the same as the device in the Alexa app, thank you!
How do I connect to Google Assistant?
Tips
- Please rename your device in the Google Home app and make sure there is a device on the list.
- Check whether the device is “Cloud Online”.
Step 1: Enter the Google Home App and click on the “+” at the top left corner > Set up device.
Step 2: Click “Work with Google”, then enter “Surplife”.
Step 3: Log in to your ” Surplife” account.
Step 4: Send commands to your Google, after the app links with Google Home successfully.
- Supported voice commands:
- Turn on/off < light name >.
- Dim < light name >.
- Brighten < light name>.
- Set < light name> to [0-100%].
- Turn < light name> to [colour].
Supported Color Options:
- Blue, Crimson, Cyan, Fuchsia, Gold, Green, Purple,
- Lime, Magenta, Orange, Red, Salmon, Turquoise,
- Sky Blue, Teal, Lavender, Violet, Yellow.
For Scenes:
- You can activate scenes by following voice commands:
- Hey Google, activate (scene name).
- Hey Google, turn on (scene name).
Notes
- If Google Home can’t control your light, please check whether the light is Cloud Online.
- Please check the device name you are calling is the same as the device in the Google Home app, thank you!
Light Colors Sync With Music-IOS
-
1. For the music files that have been loaded, click “Add music” – Import from PCStep: Copy the link and open the web on your PC, then upload your music files, back to the app, tap “Confirm”
-
For the music files that have been loaded, click “Add music”- Import from iTunes
-
For the music files that CAN’T be loaded, click the “Phone Mic” page.
Create a Schedule
Click the device icon > tap upper right corner “… ” > Schedule.
Create a SMART Home
Please make sure your device is “Cloud online”.
Step 1: Click the device icon > tap upper right corner “…” > Device
Information > Cloud “on line”.
Step 2: Enter SMART page > Create Smart > Choose a mode you need > Set your Location.
2.4G Remote Controller
(Additional purchase required)
Instruction
- Built-in Modes: There are 20 Built-in modes.
- CCT+/CCT-” only works under 2700K-6500K.
- Save scenes: Hold”S1″ when the light stays a status untill the light flashes then release the key. For: Lamp1 is warm, lamp2 is in pink gradient dynamic mode… then hold the “S1″ key for a while, now you can display”Scenel” with 1 key.
A. Pair the remote control:
After the lamp is powered on, press the power button for 5 seconds immediately
(within 3 seconds). When the lamp flashes slowly 3 times, it means the pairing
is successful.
B. Remove the remote control:
After the bulb is powered on, press the power button for 5 seconds immediately
(within 3 seconds). When the bulb flashes 3 times, it means the removal is
successful.
One-to-many control
The remote control can be paired with multiple WiFi bulbs at the same time,
and multiple WIFI bulbs can be controlled with one key without limitation.
Note: Please refer to the steps of pairing or removing the remote control.
Many-to-one control
A single WIFI bulb can be paired with multiple remote controls, and each
remote control can control the same WiFi bulb separately. ( a single bulb can
support up to 16 remote controls).
Note: Please refer to the steps of pairing or removing the remote
control.
FCC STATEMENT
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>