Clarke SG1 Safety Clear Goggles Instructions

: June 4, 2024
: Clarke

Table of Contents

Clarke SG1 Safety Clear Goggles
INTRODUCTION
GUARANTEE
SPECIFICATIONS
MARKINGS ON THE PRODUCT
MATERIALS DECLARATION
USING SAFETY GOGGLES
SAFETY WARNINGS
CLEANING, MAINTENANCE, AND STORAGE
DECLARATION OF CONFORMITY
CONTACTS
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Clarke SG1 Safety Clear Goggles

Clarke-SG1-Safety-Clear-Goggles-PRODUCT

INTRODUCTION

Thank you for purchasing this CLARKE product. Before attempting to use this product, please read these instructions carefully. In doing so you will ensure your safety and you can look forward to your purchase giving you long and satisfactory service.

GUARANTEE

This product is guaranteed against faulty manufacture for a period of 12 months from the date of purchase. Please keep your receipt which will be required as proof of purchase. This guarantee is invalid if the product is found to have been abused or tampered with in any way, or not used for its intended purpose. Faulty goods should be returned to their place of purchase, no product can be returned to us without prior permission. This guarantee does not affect your statutory rights.

SPECIFICATIONS

Optical class: 1
Material lenses: Polycarbonate
Frame: Vinyl/PVC
Headband: Fabric

MARKINGS ON THE PRODUCT

B:- protection against low energy impact (120m/s) from high-speed particles at room temperature only.

MATERIALS DECLARATION

No parts of this product is made of materials that are known to cause skin irritation. However, materials that come into contact with the skin can cause allergic reactions to certain susceptible individuals.

USING SAFETY GOGGLES

APPLICATION

These goggles are designed for eye protection against moderate impact hazards but are not unbreakable and do not provide unlimited eye, protection.
They are designed to protect the user against eye injuries through the impact of flying particles or droplets. The goggles are not intended for welding use.
The goggles have been designed for your personal safety and must be worn for the whole duration of exposure to hazards.
You should leave the work area if dizziness or eye irritation occurs or if the goggles become damaged.
The strap can be quickly adjusted for a secure, comfortable fit.

SAFETY WARNINGS

Do not modify or alter the goggles in any way.
Pitted or scratched lenses reduce vision, seriously reduce protection, and should be replaced immediately.
Materials that come into contact with the skin can cause allergic reactions to certain susceptible individuals.
If in doubt, check with supervisory personnel to ensure you have the correct level of protection relative to working conditions. If necessary consult relevant European Standards.
The clear lenses of these goggles offer no protection against optical radiation given off during welding or cutting work.

CLEANING, MAINTENANCE, AND STORAGE

Do not use abrasive materials for cleaning the goggles. Always clean either with optical cleaning solution, a cleaning solution very low in alcohol, or in warm soapy water. Rinse and dry with a soft cloth.
Parts that come into contact with the skin of different users may be regularly disinfected.
It is recommended to store in a clean, dry polythene bag when not in use. Store in a dry place sheltered from UV light, ideally in a protective case. Ideally, this should be between 5oC and 40oC.
If the lens becomes damaged the goggles must be replaced.