Denver LDB-319 LED Disco Ball User Manual

Denver LDB-319 LED Disco Ball

Product Information

Specifications:

• Model: LDB-319
• Brand: Denver
• Website: www.denver.eu
• Year: 2023
• Country: France (FR)

Product Usage Instructions

Step 1: Safety Information
This product and its accessories are recyclable. Please dispose of them responsibly.

Step 2: Remote Control User Manual
Refer to the remote control user manual for instructions on how to use it.

Step 3: Stop/Start Mode
To activate the stop/start light rotation mode, use the corresponding function on the remote control.

Step 4: No Function
If the disco light does not respond or function properly, please refer to the troubleshooting section of the user manual or contact customer support.

Step 5: Sound Activated Modes
The disco light has three sound-activated modes:

• MUSIC 1: Sound-activated mode with lights off.
• MUSIC 2: Sound-activated mode with dynamic lights.
• MUSIC 3: Sound-activated mode with strobe effects.

Step 6: How to Use the Disco Ball Light

1. Connect the disco ball light to a power source using the provided 12V cable.
2. Turn the disco ball light on/off using the corresponding switch.
3. Adjust the speed of the light rotation using the 5V control.
4. For option 1, the disco ball light is powered by the included power adapter.
5. For option 2, the disco ball light requires 3 AA batteries (not included).

Step 7: Installation
Follow the installation instructions provided in the user manual to set up the disco ball light.

Step 8: Copyright Information
All rights reserved. Copyright Denver A/S.

Contact Information:

DENVER A/S

• Omega 5A, Soeften DK-8382 Hinnerup Denmark
• Website: www.denver.eu
• Facebook: www.facebook.com/denver.eu

FAQ (Frequently Asked Questions)

Q: How do I activate the sound-activated modes?
A: Use the corresponding functions on the remote control to activate MUSIC 1, MUSIC 2, or MUSIC 3 modes.

Q: Can I use batteries instead of the power adapter?
A: Yes, you can use 3 AA batteries (not included) as an alternative power source for the disco ball light.

Safety information

Read the safety instructions carefully before using the product for first time. Keep the instructions for future reference.

1. The product is not a toy. Stored inaccessible to children.
2. Keep the product out of the reach of children and animals, in order to avoid chewing and swallowing.
3. The product’s operating and storage temperature is from 10 degrees Celsius to 40 degrees Celsius. Use under and over this the temperature can affect the functionality.
4. The product must never be opened. Touching the electronics on inside may cause electric shock. Repair or service must only be carried out by qualified personnel.
5. Do not expose the product to heat, water, moisture or directly sunlight!
6. The device is not waterproof. If water or foreign objects enters the unit, this may cause a fire or electrical shock. Stop use immediately if water or foreign objects enter the unit.
7. Charge only with the supplied USB cable.
8. Do not use non-original accessories with the product, since this may cause the product to operate abnormally.
9. Protect your eyes and do not look directly into the lightning prism when the product is operated.
10. Never use old and new batteries or batteries different types together. Remove the batteries if you do not will use the system for a longer period. Check the batteries polarity (+/-) when inserting them into the product. Error placement may cause an explosion. Batteries are not included with.

Instructions for use for the remote control

• ON/OFF
  Turn the light on or off

• Stop/Start mode:
  Stop/start light rotation

• Flash mode:
  Enter flashing mode

• Change light effect:

  • A1 – blue
  • A2 – green
  • A3 – red
  • A4 – green and blue
  • A5 – red and green
  • A6 – red and blue
  • A7 – RGB mode

Note:
Connect the light to the power supply and remove the battery isolator from the remote control before use.

How to use the disco ball light

1. On/off button
2. 5 V Micro USB charging port
3. 12 V charging port
4. Locking handle
5. Suction cup on the inside
6. Battery compartment

Dual power options

• Option 1: The disco ball light uses a USB charging cable connected an arbitrary power source (e.g. computers, power banks or power adapters).
• Option 2: The disco ball light uses 3 AA batteries (not including).

Installation

1. Step 1: Clean the surface of the wall or glass.
2. Step 2: Remove the bottom cover.
3. Step 3: Pull up the locking handle.
4. Step 4: Press the suction mount against the wall, make sure there is no air on the inside and then pull down the locking handle.

Please note that we can make changes to all our products without warning. We reserve the right for any errors and omissions in this manual.

ALL RIGHTS RESERVED COPYRIGHT DENVER A/S

denver.eu.

• Electrical and electronic equipment and batteries contain materials, components and substances that can be dangerous for health and environment if the waste (discarded electrical and electronic products and batteries) are not handled correctly.
• Electrical and electronic equipment and batteries are marked with a trash can with a cross over it, as shown above. This symbol means that electrical and electronic equipment and batteries must not thrown away with other household waste, but must disposed of separately.
• It is important that you, as an end user, get rid of your used ones batteries correctly. This way you can be sure that the batteries are recycled according to the law, and does not harm the environment.
• All cities have their own systems for waste management. Electric and electronic equipment and batteries can either be delivered free of charge to recycling stations and other collection points or stay taken directly from households. You can get more information from the local authorities in your city.

DENVER A/S

• Omega 5A, Soeften DK-8382 Hinnerup Danmark
• www.facebook.com/denver.eu.

References

• Denver A/S

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>