VEKOOTO SO1 Solar Magnetic Wireless Backup Camera User Manual
- June 14, 2024
- VEKOOTO
Table of Contents
Brand: VEKOOTO
Model：SO1
SO1 Solar Magnetic Wireless Backup Camera
SO1
Solar Magnetic Wireless Backup Camera
2.4GHz Wi-Fi & 9600mAh Battery
USER MANUAL
Foreword
Thank you for purchasing committed to providing high-quality products and
bringing a good experience to our customers. It’s our great honor to have your
trust! This manual includes product descriptions and operation descriptions.
To get the best performance, read the manual carefully before installing and
keep the manual correctly.
If you’re experiencing the following situations:
- Open the package, finding something is broken or missing.
- Open the package, and don’t like the product.
- Order a wrong product.
- Need technical support.
- Encounter problems with the camera in use.
- Have any other problems or needs.
Please feel free to e-mail our after-sales team at any time:
VEKOOTO@OUTLOOK.COM
When sending emails, attach your order number or product model. Each of your
messages will be answered within 12 hours.
We will help you solve your problems and provide you with the best after-sales
service and technical support!
Package List
If you find that the product in the packaging is damaged or lacks accessories,
please send your #order number and your delivery address/phone number to the
after -sales customer service email, and we will immediately handle it.
VEKOOTO@OUTLOOK.COM
Introduction to the Camera
- Light Sensor
- Infrared light
- Camera lens
- Power indicator
- Power button
- Magnetic base
- Antenna
- Solar panel
- Type-C charging port
| 1 to 25% of the remaining power
---|---
| 26 to 50% of the remaining power
| 51 to 75% of the remaining power
| 76 to 100% of the remaining power
Flashes| Low power, unable to work
The blue battery indicator will light up when the camera is powered on. The blue power indicator light will flash when charging. When the solar panel of the camera is exposed to sunlight, the camera will start charging (the blue light flashes) at this time, if you want to turn off or turn on the camera, please cover the solar panel to check whether you have turned on or off the camera.
| Model | SO1 |
|---|
Resolution
Transmission Distance| HD 1920×1080（3 Million）50ft in open distance
Transmission Bandwidth| 20Mbps（Max）
Battery Capacity
Battery Level Display| 9600mA
Yes，4 Blue lights
Battery Charging| USB 5V 2A / 6H
Frequency
ON/OFF Mode| 2400-2483.5MHZ
Press to ON/OFF
Installation Mode
Night Vision| Magnet base adsorption installation
Support IR
Waterproof level| IP68
Steps to Use
Step ①: Download App
Search for “Rear Camera” or scan the QR code to download the APP in Google
Play or APP store.
|
---|---
https://apps.apple.com/cn/app/rear-camera/id1564691547|
https://qr23.cn/EvXpKQ
Step ② : Install the antenna on the camera. Power on the camera. The
camera will generate a Wi-Fi signal named “MH_xxxxxx” Go to your phone’s
WLAN/Network settings and connect to this Wi-Fi network.
Step ③: Open the app, and you will be able to see the image transmitted
by the camera. Note: When you open the app for the first time, it will prompt
you to grant certain permissions. iPhone will prompt for the following two
permissions. Android equipment will prompt to agree to privacy policy. Please
choose as shown in the images.
iOS： Android: iOS: Setting up the WLAN connection: 
Android: Setting up the WI-FI/Network connection:
Tips
-
The APP may pop up some prompts to request some permissions. such as reading the location or connecting to the WLAN, etc., please click OK/Yes, or give the APP the highest permission, otherwise, the APP may not be used properly.
-
For Android Devices, if you want to use your mobile network data while using the APP, please ignore the message “Do you confirm to use this network?”, that means passing this message by clicking or skidding to somewhere else without pressing YES or NO. If you already pressed “YES” then you can use the mobile network data, the camera still works well. If you want to reset it, please ignore the connected WI-Fl hotspot and reconnect.
-
Most other APPs will not allow using mobile network data while using APP.
-
For iOS Devices, if you want to use your mobile network data while using the APP, please open After you connect the camera’s WI-Fl hotspot several times, it will connect to it automatically the next time when you have
WI-Fl on, and the camera is powered properly. (Some Android devices need to CLOSE WLAN+ or WLAN security detection, or it will not connect automatically and can only connect every time manually.) -
Multiple users can view the camera image on the
app at the same time, but the image may be delayed.
You can hook up two cameras with one device and check the camera view by switching the WI-Fl hotspot. -
The WIFI Antenna can’t touch any metal, or it will greatly affect the video signal transmission.
-
We have tested every camera manually twice before sending it out, if when using it, please contact us without hesitation if you have any questions.
FAQ
Q1: Why can't I find the Wi-Fi hotspot signal of the camera?
A1: First, check if the camera antenna is installed correctly. Check whether the camera still has the remaining power. If the blue power indicator is often on, it means that there is remaining power. If only one lamp is flickering, it means that the camera is out of power.
Q2: When I first enter the app, it prompts for many permissions. Is my privacy secure?
A2: You don't need to worry about your privacy because the app does not connect to the internet. All the data is stored locally on your phone.
Q3: Why did I have connected the camera Wi-Fi, and after returning the APP, it also prompts me to connect to Wi-Fi?
A3: Please remove the app from the program background and re -open the app again.
Q4: Why is the Wi-Fi signal of the camera very weak?
A4: Please make sure the antenna of the camera is tightly installed, and the antenna does not touch the metal because the metal blocks the Wi-Fi signal. You can also try to replace the camera antenna with extended antenna to expand the Wi-Fi transmission distance of the camera.
Q5: Why do I connect the camera with different mobile phones, some mobile phones can display the camera image well, while some mobile phones have delay?
A5: When we develop this camera, we bought most of the mobile phones on the market for testing. Finally, we found that the Wi-Fi module of some mobile phones is relatively weak and cannot withstand high-quality image output, so the image will be delayed.
Q6: Can one app simultaneously view the footage of two identical cameras?
A6: Can't view at the same time, but you can view the screen transmission of different cameras by switching the camera Wi-Fi.
Q7: Why have I connected the camera's Wi-Fi, or can't I see the camera transmission?
Q8: Why is the screen delay, loss of signals or frozen?
A9: Please close the Bluetooth function of your device and some other applications to reserve enough memory for camera APP. Check whether the antenna of the camera is secure and ensure that the antenna should not be exposed to metal. At the same time, avoid using a camera in a lot of Wi-Fi signals, because the Wi-Fi signal is easily disturbed.
Customer Service
If you need technical guidance or difficulty in using the camera, please contact our after -sales customer service at any time. Our customers will answer all your questions within 12 hours. When you contact our after -sales customer service, please attach your #order number or your product model so that we can quickly reply to your question.
Warranty
All VEKOOTO products provide a 1-year free warranty service. Unless human damage.