WELLMOON MOONW2 Headphones Wireless Bluetooth 5.3 80Hrs Playback User Manual
- June 14, 2024
- WELLMOON
Table of Contents
- What’s in the box?
- Overview
- Product Parameters
- How to reset
- Maintenance
- How to pair the two headphones with my phone?
- FCC Warning
- How to wear the earbuds correctly?
- How to place headphones?
- Functions
- Charging
- Charging Case Charging
- FAQ
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
WELLMOON MOONW2 Headphones Wireless Bluetooth 5.3 80Hrs Playback User Manual
What’s in the box?
Note:
- Please Remove Protective Films of The LED Power Display and Charging Contacts Before Using it.
- The default volume is maximum, please adjust the volume appropriately before enjoying your music!
Overview
Product Parameters
-
Supports: HSP/HFP/A2DP/AVRCP
-
Charging Interface: Point-Contact
-
Charging Port: Type-C
-
Battery Capacity: (Li-ion battery inside)
Earbud: 50mAh
Charging case: 600mAh -
Battery Life: Actual battery life changes with the song types and volume requirements
-
Standby Time: Up to 100 hours
-
Charging Time: 1-1.5 Hrs for earbuds / 2Hrs for charging case
-
Transmission Range: 33 feet (with no obstacle)
How to reset
- Turn off the bluetooth of all devices (make sure the earbuds are turned on and not connected).
- Click the Multi-functional button of two earbuds for 4 times.
- Put the earbuds back into the charging case.
- Take out the earbuds from the charging case and they enter pairing mode (Pairing mode: one earbud will flash red and blue alternately, the other will slowly flash blue).
- Search for “Moon W2” and tap to connect on your device.
- lf the reset fails, please repeat the above steps.
Tips: The earbuds cannot be reset when they are powered off or connected.
Maintenance
After a period of use, the charging metal contacts of the earbuds may be contaminated with sweat and dirt, resulting in the earbuds aren’t able to power on, charge, or having connection issues, and the protective grille of both earbuds may accumulate earwax and dust, resulting in mu ed volume. Please use the cleaning swab to remove dust or earwax from the charging contacts and the protective grille.
Note: lf the earbuds have been unused for more than 3 months, we recommend that you charge them.
How to pair the two headphones with my phone?
(Prior to first use – Please be sure both the Earbuds and the Charging Case
are fully charged.)
Step 1 – Take both headphones out of the charging case, the twin Earbuds will
power on and pair with each other automatically.
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment. NOTE: This equipment
has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help. The
device has been evaluated to meet general RF exposure requirement. The device
can be used in portable exposure condition without restriction
[ lf the earbuds are not connected to your device over 3 minutes, the earbuds will power off automatically. Turn on the headphones manually by pressing down the MFB about 3 seconds at the prompt “Power on” and one beep sound. ] “R” earbuds alternate flash red-blue light and “L” earbuds flash blue light means TWS pairing done.
Step 2 – Activate Bluetooth setting on your phone, search and choose “T16” to
connect.
[ There should be voice prompt “connected” if you wear the earbuds.] Earbuds’
indicator light off means already connect with mobile.
Automatically re-connection: The last paired device will reconnect the earbuds by default after the first successful connection.
- lf there is any issue with pairing both earbuds to your phone, please put the earbuds back into the charging case and repeat the above steps.
- These earbuds not only can be used together, but also can be used individually. If you want to use single mode, just take one earbud out of the case and connect to your phone, it will be OK. Or when you are using with Dual mode, turn off one earbud manually or put one earbud back into the charging case, you will be able to hang on to the other one by single mode.
How to wear the earbuds correctly?
Take out “Rearbud” to wear on right ear.
The ear hooks are adjustable, you can bend it to fit your ears tighter if in need.
How to place headphones?
Functions
Charging
Case Charging
There is a Type-C usb charging cable in the package, please use it to charge
the case directly. During charring, the digital display will flashing and
display battery in real time. After full charge, the number is displayed as
100.
1)When being charged, Earbuds’ LED light will illuminate red.
2)When fully charged, the charging case will automatically stop charging and
the earbuds’ LED Red light will go off.
Charging Case Charging
There is a Type-C usb charging cable in the package, please use it to charge
the case directly.
During charring, the digital display will flashing and display battery in real
time. After full charge, the number is displayed as 100.
Charging Warning
- After using a period of time, the earbuds don’t charge or even can’t turn on because of oxidized magnet connector. You can handle this problem by using alcohol rag to clean the magnet connector on earbuds and charging case.
- Earbuds can automatically turn off immediately, meanwhile start charging when you put back into charging case. Also will automatically turn on and pairing when pick it up.
FAQ
Q: Why these earbuds can not pair with my mobile phones ?
A: 1. Please make sure the earbuds are full charged and power on. 2. Please make sure the bluetooth of your phone is turn on. Charging Case Charging 3. lf above 2 points have no problem, please put earbuds into the case again and close the case, hold on for 1min, then open the charging case and reconnect earbuds with your phone.
Q: Why does the music cut in or cut out.
Q: When being on a phone call, can I hear voice in both Earbuds?
A: Yes, you can hear the voice in both earbuds when both earbuds are paired and connected to the same mobile phone.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>