SVEN PS-800 Party Speaker System with Bluetooth and FM-radio User Manual

Party Speaker System
with Bluetooth and FM-radio
USER MANUAL

PS-800 Party Speaker System with Bluetooth and FM-radio

PS-800
www.sven.fi
Congratulations on your purchase of the SVEN speaker system!
COPYRIGHT
© SVEN PTE. LTD. Version 1.3 (28.12.2022).
This Manual and information contained in it are copyrighted. All rights reserved.
BUYER RECOMMENDATIONS

• Unpack the device carefully. Make sure there are no accessories left in the box. Check up the device for damage; if the product was damaged during transportation, address the firm which carried out the delivery; if the product functions incorrectly, address the dealer at once.
• Shipping and transportation equipment is permitted only in the original container.
• Does not require special conditions for realization.
• Dispose of in accordance with regulations for the disposal of household and computer equipment.
• The date of manufacture of the product is indicated on the box.

APPLICATION
SVEN PS-800 party speaker system with Bluetooth and FM-radio is designed for operation with PC, notebooks and other mobile devices by means of data transfer via Bluetooth protocol. It can be also used in internet telephony, during video conferences, in multimedia applications, in interactive games, for speech recognition and foreign language teaching. Microphone input with echo function, FM-tuner and the player with USB-flash and micro SD-cards are included.

SPECIAL FEATURES

• Dynamic switchable RGB backlight.
• Wireless signal transmission via Bluetooth.
• Wireless connection of two speakers to one source (TWS).
• Two microphone inputs for karaoke.
• Adjusting the karaoke microphone echo level.
• USB-flash and microSD cards playback support.
• LED display.
• Remote control.
• Horizontal and vertical arrangement possibility.
• Equalizer function.
• FM radio*.
• AUX input for connecting to an audio source.
• Fast Bluetooth connection by NFC**.
• Carrying handle.
• Tray for smartphone.

* An external antenna required (included).
** NFС works only with Android devices (version 4.1 and later).

Speaker system description

1. POWER: power button.

2. Indicator.

3. DC 9V-1.5A: charger connecting, the laptop/PC.

4. USB: USB-flash card slot.

5. MICRO SD: micro SD card slot.

6. AUX: 3.5 mm mini-jack for audio signal connecting (phone, MP3 player, etc.).

7. MIC1: 6.3 mm jack microphone jack.

8. MIC2: 6.3 mm jack microphone jack.

9. NFC.

10. MIC VOL +/-: microphone volume control knob.

11. MODE: switching modes button: Bluetooth/Radio/Player/LINE IN (short pressing); ON/OFF the service signals (long pressing).

12. : previous track (short pressing in Player and Bluetooth mode); Navigation on the track (long pressing in Player and Bluetooth mode); Previous station (short pressing in Radio mode); Search for a station with a lower frequency (long pressing in Radio mode).

13. m : switch lighitng color (short pressing); switch backlight mode (long pressing).

14. Display.
    

15. : Play/Pause button (short pressing in Player and Bluetooth mode); Start/Stop auto scan (long pressing in Radio mode); Mute (short pressing in Radio and LINE IN mode); Disconnect from device (long pressing in Bluetooth mode).

16. MENU: Connecting an additional speaker (long pressing); Bass/Treble/Echo settings.

17. : next track (short pressing in Player and Bluetooth mode); Navigation on the track (long pressing in Player and Bluetooth mode); Next station (short pressing in  Radio mode); Search for a station with a higher frequency (long pressing in Radio mode).

18. VOLUME +/-: volume control knob.

Remote control

1. : switch backlight color; switch backlight mode.
2. : On/Off button.
3. EQ: EQ mode switch button.
4. +/- : volume up/down.
5. : previous track (short pressing in Player and Bluetooth mode); track navigation (long pressing in Player and  Bluetooth modes); previous station (in Radio mode).
6. TWS: Connecting an additional speaker.
7. MODE: switching modes button: Bluetooth/Radio/Player/ LINE IN (short pressing); ON/OFF the service signals (long pressing).
8. 0-9: numeric pad for entering track number (in Player mode) or number track/station (in Radio mode).
9. REPEAT: Repeat mode selection button (in Player mode).
10. : Mute (short pressing); Turning on/off the backlight (long pressing).
11. BASS/TREBLE: Bass/treble level adjustment.
12. : next track (short pressing in Player and Bluetooth mode); track navigation (long pressing in Player and Bluetooth modes); next station (in Radio mode).
13. MIC: Microphone volume/Echo level adjustment (short pressing); Enable microphone priority mode (long pressing).
14. RESET: reset settings (long pressing).
15. : Play/Pause button (short pressing in Player and Bluetooth mode); Start/Stop auto scan (long pressing in Radio mode); Mute (short pressing in Radio and LINE IN mode); Disconnect from device (long pressing in Bluetooth mode).

CONNECTION AND OPERATION

Attention! The built-in battery must be charged completely prior to the application.
Speaker system battery charging

• Connect speaker system to a charger. During battery charging the indicator 2 is red. Indicator 2 will be light green when the battery is charged.
• The battery is used in the speaker system as an integral part of the device, therefore do not try to extract or replace it, because this can result in the warranty cancellation or the device damage.

OPERATION MODES

Bluetooth mode

• Wireless data transfer via the Bluetooth protocol enables to connect speaker system to compatible devises. Maximum radius of action of data transfer is 10 m. Such stacles as walls or other electronic devices can interfere with the signal transfer.
  

• Turn on the speaker system Bluetooth mode — press button МODE k several times until display shows “BLUE” inscription.

• It is necessary to select the search mode of devices with Bluetooth on a signal source (telephone, notebook, smartphone, etc.). “SVEN PS-710/730/770/800/850”, massage will be displayed on the screen which is to be connected to*.

• When connection is successful, there will be a short beep and the indication of the search mode on speaker system is over**.

* You might have to enter “0000” code to connect some models of devices via Bluetooth.
** If the item has been already registered in the device list of a source, then the second search mode activation is not obligatory. Choose the item name “SVEN PS- 710/730/770/800/850” and the “connect” command on the source.
Connecting to the speaker via Bluetooth using NFC
NFС works only with Android devices (version 4.1 and later).
To connect the speaker to a smartphone, the smartphone must be equipped with an NFC chip.
It must be enabled in the wireless settings.

• Turn on the speaker system Bluetooth mode — press button МODE 11 several times until display shows “BLUE” inscription.
• Hold the phone close to the NFC mark 9 on the top panel and wait for a short beep to confirm a successful speaker connection.
  Note. You need to allow connections on the phone (depending on the phone’s operating system).

Radio mode
Attention! To improve the reception quality of the radio signal, connect the 3.5 mm mini-jack cable (included) to the AUX input 8.

• Turn on the speaker system — press button МODE 11 several times until the display shows the station frequency. Long-term pressing button 15 activates auto search mode. After scanning completion, the first scanned radio station will start to operate automatically. With buttons 12 and 17 select a desired radio station.
  Player mode
  Attention! The file system of a micro SD carrier is FAT32. Maximum volume is 32 GB.
  The system will enter the Player mode automatically when a carrier (USB flash or SD card) is connected to corresponding ports.
  Use button 15 to switch between Play/Pause modes. You can control tracks by using buttons 12 (previous track) and 17 (next track).The use in the wired mode (LINE IN).

• Speaker system can be used as an external device for amplifying any audio source with a 3.5 mm output mini-jack. Connect a cable mini USB, plug 3.5 mini-jack to the audio input AUX 6. Turn the speakers to the LINE IN mode — press the MODE button 11 several times until “LINE” appears on the display.

Connecting an additional speaker
For model PS-800 you can connect an additional speaker.

• For TWS connection in Bluetooth mode:
  – Turn both speakers into Bluetooth mode (both speakers should be in search mode).
  – On another speaker press and hold button MENU 16 on control panel or TWS button 6 on Remote control.
  – If two speakers are successfully connected between themselves, the master unit will display “BLUE” constantly, the slave unit will display “SLAU”.
  – Connect the signal source via Bluetooth. Both speakers will appear in the search list as one device.

• For connection in other modes (FM radio/Player/LINE IN):
  – on any speaker, press and hold the MENU button 16 on the control panel or the TWS button f on the remote control.
  – If two speakers are successfully connected to each other, the operating mode will be displayed on the master device, and “SLAU” will be displayed on the slave device.

Reset
To reset the settings, long press the RESET 14 on remote control. Settings will reset.

TECHNICAL SPECIFICATIONS

Notes. Technical specifications given in this table are supplemental information and cannot give occasion to claims. Technical specifications and package contents are subject to change without notice due to the improvement of SVEN production.

Technical support is on www.sven.fi.
Model: PS-800
Importer: Tiralana OY, Office 102, Kotolahdentie 15, 48310 Kotka, Finland.
Manufacturer: SVEN PTE. LTD, 176 Joo Chiat
Road, № 02-02, Singapore, 427447.
Produced under the control of Oy Sven Scandinavia Ltd. 15, Kotolahdentie, Kotka, Finland,
48310. Made in
China.
® Registered Trademark of Oy SVEN
Scandinavia Ltd. Finland.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>