HOTO QWLSD007 Li ion Screwdriver Lite User Manual

HOTO QWLSD007 Li ion Screwdriver Lite

Product Information

The HOTO Li-ion Screwdriver-Lite is a versatile power tool designed for screw- driving tasks. It features a compact design, making it easy to handle and use. The screwdriver is equipped with a Bit Holder for holding various screwdriver bits, a Forward/Reverse rotation button for controlling the direction of rotation, an LED Indicator for battery level and charging status, and a Micro USB universal charging port.

• Key Features:
  • Bit Holder for holding screwdriver bits
  • Forward/Reverse rotation button for controlling direction
  • LED Indicator for battery level and charging status
  • Micro USB universal charging port
• Indicator Status:
  • If the battery level drops below 20% during use, the indicator will blink red quickly for 5 seconds and turn off after the button is released.
  • During charging, the indicator will blink red.
  • When the battery is fully charged, the indicator will stay white.
• General Power Tool Safety Warnings:
  • Keep the work area clean and well-lit.
  • Do not operate power tools in explosive atmospheres.
  • Keep children and bystanders away while operating the power tool.
• Power Tool Use And Care:
  • Use the correct power tool for your application.
  • Do not use the power tool if the switch does not turn on and off.
  • Disconnect the plug from the power source and/or remove the battery pack before making any adjustments or servicing.
• Battery Tool Use And Care:
  • Recharge only with the charger specified by the manufacturer.
  • Use power tools only with specifically designated battery packs.
  • Have your power tool serviced by a qualified repair person using identical replacement parts.
• Safety Instructions for All Operations:
  • Hold the power tool by insulated gripping surfaces when performing an operation where the cutting accessory or fasteners may contact hidden wiring.
  • Avoid cutting accessories contacting live wires to prevent electric shock.

Product Usage Instructions

1. Before using the HOTO Li-ion Screwdriver-Lite, make sure to read and understand all the safety warnings and instructions provided in the manual.
2. Insert the desired screwdriver bit into the Bit Holder.
3. To tighten screws, press and hold the Forward/Reverse rotation button.
4. To loosen or remove screws, press and hold the Forward/Reverse rotation button in the opposite direction.
5. Monitor the battery level using the LED Indicator. If the indicator blinks red quickly for 5 seconds and turns off, it indicates a low battery level. Recharge the screwdriver using the included USB charging cable and a compatible charger.
6. During charging, the LED Indicator will blink red. Once the battery is fully charged, the indicator will stay white.
7. Always hold the power tool by insulated gripping surfaces to prevent electric shock when working near hidden wiring.

Product Overview

Please read this manual carefully before use, and retain it for future reference. Thank you for purchasing the HOTO Li-ion Screwdriver-Lite.

1. Bit Holder
2. Forward/Reverse rotation button
3. LED Indicator
4. Charging Port

How to Use

Forward/Reverse rotation button

• Press level to turn in or tighten screws.
• Press level to loosen or remove screws.

Indicator Status

• If the battery level drops below 20% when the screwdriver is in use, the indicator will blink red for 5 seconds quickly, and it will turn off after the button is released.
• When charging, the indicator will blink red.
• When the battery is fully charged, the indicator will stay white.

This screwdriver is equipped with a Micro USB universal charging port, and a USB charging cable is included.

General Power

General Power Tool Safety Warnings

WARNING! Read all safety warnings, instructions, illustrations, and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term“ power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.

Work Area Safety

• Keep the work area clean and well-lit. Cluttered or dark areas invite accidents.
• Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.
• Power tools create sparks that may ignite the dust or fumes.
• Keep children and bystanders away while operating a power tool.
• Distractions can cause you to lose control.

Electrical safety

• Power tool plugs must match the outlet. Never modify the plug in any way.
• Do not use any adapter plugs with earthed (grounded) power tools.
• Unmodified plugs and matching outlets will reduce the risk of electric shock.
• Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges, and refrigerators.
• There is an increased risk of electric shock if your body is earthed or grounded.
• Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
• Do not abuse the cord.
• Never use the cord for carrying, pulling, or unplugging the power tool.
• Keep the cord away from heat, oil, sharp edges, or moving parts.
• Damaged or entangled cords increase the risk of electric shock.
• When operating a power tool outdoors, use an extension cord suitable for outdoor use. The use of a cord suitable for outdoor use reduces the risk of electric shock.
• If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply.
• The use of an RCD reduces the risk of electric shock.

Personal Safety

• Stay alert, watch what you are doing, and use common sense when operating a power tool.
• Do not use a power tool while you are tired or under the influence of drugs, alcohol, or medication.
• A moment of inattention while operating power tools may result in serious personal injury.
• Use personal protective equipment. Always wear eye protection.
• Protective equipment such as a dust mask, non-skid safety shoes, hard hats, or hearing protection used for appropriate conditions will reduce personal injuries.
• Prevent unintentional starting.
• Ensure the switch is in the off-position before connecting to the power source and/or battery pack, picking up or carrying the tool.
• Carrying power tools with your finger on the switch or energizing power tools that have the switch on invites accidents.
• Remove any adjusting key or wrench before turning the power tool on.
• A wrench or a key left attached to a rotating part of the power tool may result in personal injury.
• Do not overreach. Keep proper footing and balance at all times.
• This enables better control of the power tool in unexpected situations.
• Dress properly.
• Do not wear loose clothing or jewelry.
• Keep your hair and clothing away from moving parts.
• Loose clothes, jewelry, or long hair can be caught in moving parts.
• If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used.
• The use of dust collection can reduce dust-related hazards.
• Do not let familiarity gained from the frequent use of tools allow you to become complacent and ignore tool safety principles.
• A careless action can cause severe injury within a fraction of a second.

Power Tool

Power Tool Use And Care

• Do not force the power tool. Use the correct power tool for your application.
• The correct power tool will do the job better and safer at the rate for which it was designed.
• Do not use the power tool if the switch does not turn it on and off.
• Any power tool that cannot be controlled with the switch is dangerous and must be repaired.
• Disconnect the plug from the power source and/or remove the battery pack, if detachable, from the power tool before making any adjustments, changing accessories, or storing power tools.
• Such preventive safety measures reduce the risk of starting the power tool accidentally.
• Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool.
• Power tools are dangerous in the hands of untrained users.
• Maintain power tools and accessories.
• Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the power tool’s operation.
• If damaged, have the power tool repaired before use.
• Many accidents are caused by poorly maintained power tools.
• Use the power tool, accessories tool bits, etc. in accordance with these instructions, taking into account the working conditions and the work to be performed.
• Use of the power tool for operations different from those intended could result in a hazardous situation.
• Keep handles and grasping surfaces dry, clean, and free from oil and grease.
• Slippery handles and grasping surfaces do not allow for safe handling and control of the tool in unexpected situations.

Battery tool use and care

• Recharge only with the charger specified by the manufacturer.
• A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.
• Use power tools only with specifically designated battery packs.
• Use of any other battery packs may create a risk of injury and fire.
• When the battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws, or other small metal objects, that can make a connection from one terminal to another.
• Shorting the battery terminals together may cause burns or a fire.
• Under abusive conditions, liquid may be ejected from the battery; avoid contact.
• If contact accidentally occurs, flush with water.
• If liquid contacts the eyes, seek medical help.
• Liquid ejected from the battery may cause irritation or burns.
• Do not use a battery pack or tool that is damaged or modified.
• Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion, or risk of injury.
• Do not expose a battery pack or tool to fire or excessive temperature.
• Exposure to fire or temperature above 130°C may cause an explosion.
• Follow all charging instructions and do not charge the battery pack or tool outside the temperature range specified in the instructions.
• Charging improperly or at temperatures outside the specified range may damage the battery and increase the risk of fire.

Service

• Have your power tool serviced by a qualified repair person using only identical replacement parts.
• This will ensure that the safety of the power tool is maintained.
• Never service damaged battery packs.
• Service of battery packs should only be performed by the manufacturer or authorized service providers.

Safety instructions

Safety instructions for all operations

• Hold the power tool by insulated gripping surfaces, when performing an operation where the cutting accessory or fasteners may contact hidden wiring.
• Cutting accessory contacting a“ live” wire may make exposed metal parts of the power too“live” and could give the operator an electric shock.

Safety instructions when using long drill bits

• Never operate at a higher speed than the maximum speed rating of the drill bit.
• At higher speeds, the bit is likely to bend if allowed to rotate freely without contacting the workpiece, resulting in personal injury.
• Always start drilling at low speed and with the bit tip in contact with the workpiece.
• At higher speeds, the bit is likely to bend if allowed to rotate freely without contacting the workpiece, resulting in personal injury.
• Apply pressure only in direct line with the bit and do not apply excessive pressure.
• Bits can bend causing breakage or loss of control, resulting in personal injury.

Additional safety information

• Secure the workpiece.
• A workpiece clamped with clamping devices or in a vice is held more securely than by hand.
• Always wait until the power tool has come to a complete stop before placing it down.
• The application tool can jam and cause you to lose control of the power tool.
• Switch the power tool off immediately if the application tool becomes blocked.
• Be prepared for high torque reactions which cause kickback.
• The application tool becomes blocked when it becomes jammed in the workpiece or when the power tool becomes overloaded.
• Use suitable detectors to determine if there are hidden supply lines or contact the local utility company for assistance.
• Contact with electric cables can cause fire and electrical shock.
• Damaging gas lines can lead to explosions.
• Breaking water pipes causes property damage.
• Hold the power tool securely. When tightening and loosening screws be prepared for temporarily high torque reactions.
• In case of damage and improper use of the battery, vapors may be emitted.
• The battery can set alight or explode.
• Ensure the area is well-ventilated and seek medical attention should you experience any adverse effects.
• The vapors may irritate the respiratory system.
• Do not open the battery. There is a risk of short-circuiting.
• The battery can be damaged by pointed objects such as nails or screwdrivers or by force applied externally.
• An internal short circuit may occur, causing the battery to burn, smoke, explode, or overheat.
• Only use the battery with products from the manufacturer.
• This is the only way in which you can protect the battery against dangerous overload.
• Protect the battery against heat, e.g. continuous intense sunlight, fire, dirt, water, and moisture.
• There is a risk of explosion and short-circuiting.

Troubleshooting

Specifications

• Model： QWLSD007
• Maximum Torque in Electric Mode: 3 N·m
• Maximum Torque in Manual Mode: 8 N·m
• Main Unit Net Weight: Approx.185g
• Item Dimensions: 169×34×34 mm
• Rated Voltage: 3.6V
• Rotation per Minute(Unloaded): 220r/min
• Bit Size: C6.3×50mm PH2/H4
• Charging Time： <150min
• Manufactured by: Shanghai HOTO Technology Co., Ltd.
• Address: Building 45, No.50 Moganshan Road, Putuo District Shanghai, China

DECLARATION OF CONFORMITY

• EU Declaration of Conformity
• We Shanghai HOTO Technology Co., Ltd.
• Declare that the product: HOTO Li-ion Screwdriver-Lite/QWLSD007
• Complies with the essential health and safety requirements of the following directives:
• 2014/30/EU Electromagnetic Compatibility directive References to the following harmonized standard were made:
• EN55014-1: 2017+A11:2020
• EN55014-2: 2015
• 20011/65/EU+ (EU) 2015/863 Restrictions of the Use of Certain Hazardous
• Substances in Electrical and Electronic Equipment
• Authorized signatory and technical file holder:
• Shanghai HOTO Technology Co., Ltd.
• Building 45, No.50 Moganshan Road, Shanghai, China

Stay tuned to our social media (@hoto_official)

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>