ZYCOO 5CCT6 Pack Thin Ceiling LED Recessed Lights 8 in with Junction Box User Guide

ZYCOO 5CCT6 Pack Thin Ceiling LED Recessed Lights 8 in with Junction Box

INSTALLATION INSTRUCTIONS

1. Turn Off power from the electrical panel prior to installation.
2. Determine the location where you want to install the fixture and cut a 8″ (203.2mm) hole in the ceiling according to the template in the box (fig. 1).
3. Open the junction box cover and remove the appropriate knockout(s) on the side panel (fig. 2).
4. Insert the electrical supply cable through the knockout and secure with a cable connector.
5. Using quick-connect push-in terminals, connect the ground wire to the ground wire terminal; black wire to black wire terminal; white wire to white wire terminal (fig. 2).
6. Place all wiring and connections back into the junction box and close the cover. Connect the junction box to the light panel with the quick connect system.
7. Insert the junction box through the mounting hole (fig. 3).
8. Push clips on the fixture upwards and insert fixture base into the mounting hole. Release the clips and fixture will be pulled flush to the ceiling (fig. 4).
9. NOTE: The back of the unit and the junction box must not be exposed to damp locations (fig. 5).

Cut-Hole size

• 8″ Round Φ 8″ (Φ203.2mm)

Information on how to set-up the switch inside junction box

Documents / Resources

| ZYCOO 5CCT6 Pack Thin Ceiling LED Recessed Lights 8 in with Junction Box [pdf] User Guide
5CCT6 Pack Thin Ceiling LED Recessed Lights 8 in with Junction Box, 5CCT6, Pack Thin Ceiling LED Recessed Lights 8 in with Junction Box, LED Recessed Lights 8 in with Junction Box, Lights 8 in with Junction Box
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>