Dcolor U8 ATSC Digital Converter Box for TV User Guide
- June 14, 2024
- DCOLOR
Table of Contents
Dcolor U8 ATSC Digital Converter Box for TV
Enjoy Digital TV Programs Over-The-Air Channels
- Happy? Tell the whole world
- Unhappy? Contact us to get help
Packing list
Functional Port
Upgrade to DTV
Attention
- Place the IR Receiver in front of your TV Not behind it
- Insert 2 AAA batteries (not included) into your remote
Stick Remote Control
Remote Auto -learning Set
Troubleshooting
Problem | Possible Causes | What To Do |
---|---|---|
The IR display does not light up | The power cord is not connected | Connect the |
USB to DC power to the 5V USB outlet from the TV USB or USB Adapter
| The tuner is on standby| Press the POWER key on the remote to turn it ON
No sound and no picture| The HDMI cable is not connected| Connect the HDMI
cable to your TV HDMI port
No signal when selecting channels
| The antenna is disconnected| Make sure ANT has been connected and can see
the outdoor, outdoor ANT is a much stronger signal
Program parameters are set incorrectly| Set the country and language in your
location
Picture only, no sound
| The HDMI cable is connected incorrectly| Check whether the HDMI cable is connected stably or not
System in MUTE mode
| Press a MUTE key on the remote to restore the volume
Sound only, no picture
| The HDMI cable is connected incorrectly| Check whether the HDMI cable is
connected stably or not
The current channel is on radio mode| Normal
The remote control does not work
| The IR receiver is blocked by other things| Put the IR receiver in front of
your TV, not behind it
Not enough power in the battery| Change battery
Can not find the USB disk| USB format is not correct| USB format should be
FAT32
DVR can not work
|
not USB disk
|
DVR function must be based on the USB disk
USB disk format is not correct| USB format should be FAT32
- support: dcolorteam@gmail.com
Channel Search
Select 【Channel Search】then the tuner will search channels automatically
- This process may take a few minutes
Note: Please make sure the ANT has been connected
Channel Search Parameter
- Select【Antenna Power “On”】if the antenna has no power supply
- Select 【Signal Type “Air”】 since the tuner only supports OTA signal
Setup Sleep Time
The tuner can be set to sleep at any period Select 【1 Hour】 The tuner will wake up in 1 hour
Setup Power On/Off
Select 【Power On/Off】
Select 【Power On “Enable”】Then the tuner can be set to power on at any time
Software Update
Software Update to improve some bugs
USB Media Play
- Select 【Multimedia】
- Then you can play 【Music, Photo, Movie, PVR】 via USB disk up to 4TB
Note: USB disk format should be FAT32
PVR/DVR (TV Record)
Find More Channels Info
You can find more available channels in Your erea via : http://dtvgovmaps.com/
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>