tigwin TAP-YC-RD-01 Apple Peeler Corer And Slicer User Manual

tigwin TAP-YC-RD-01 Apple Peeler Corer And Slicer

Product Information

The 537.141 Apple Peeler, Corer & Slicer is a manual kitchen appliance designed to peel, core, and slice apples in one easy operation. The appliance consists of several components:

• A – Vacuum Base with Lever
• B – Shaft Lever
• C – Handle
• D – Fork
• E – Corer Blade

Specifications

• Model: 537.141
• Type: Manual Apple Peeler, Corer & Slicer
• Material: Stainless Steel, Plastic

Frequently Asked Questions

• Q: Is the corer blade replaceable?
  • A: Yes, the corer blade is replaceable. Please refer to the spare part list for the exact replacement part number.
• Q: Can I use this appliance with other fruits?
  • A: While the appliance is primarily designed for apples, it can also be used with other similar-sized fruits such as pears.
• Q: Is the appliance dishwasher safe?
  • A: No, the appliance is not dishwasher safe. It should be washed by hand under warm water and dried thoroughly after each use.
• Q: How do I adjust the thickness of the slices?
  • A: The thickness of the slices cannot be adjusted on this manual appliance. The slices will have a standard thickness determined by the corer blade.

Product Usage Instructions

Important Safety Information

Keep away from children. The blade is very sharp. Wash the appliance before the first use and after each use under warm water, then wipe it.

Assembly Instructions

1. The handle has been placed on the peeler backward to conserve space in the box. To correct this, release the shaft lever and pull the shaft back slightly. Turn the handle counterclockwise to unscrew it from the shaft and reattach it by turning it firmly clockwise.
2. Secure the apple peeler to a counter or tabletop by turning the lever on the vacuum base.
3. Turn the handle all the way in to ensure that the fork passes directly through the center of the coring slicing blade. If adjustment is needed, loosen the thumb screw and center the blade around the fork.

Peeling, Coring, and Slicing

Now you’re ready to begin peeling:

1. Press an apple, stem end first, firmly onto the three-prong fork.
2. Make sure the apple is centered on the fork for optimal peeling performance.
3. Turn the handle to peel, core, and slice the apple in one easy operation.
4. When peeling is completed, slide the apple spiral from the core.
5. Release the lever and pull the handle back to release the core from the fork.

The sharp end of the corer blade can be used to make apple rings for canning, drying, salads, pies, and other apple treats.

PRODUCT DESCRIPTION

KEEP AWAY FROM CHILDREN – BE CAREFUL THE BLADE IS VERY SHARP – WASH THE APPLIANCE
BEFORE THE FIRST USE AND AFTER EACH USE UNDER THE WARM WATER, THEN, WIPE IT.

Assembly Instructions

APPLE PEELER – SUCTION BASE

1. The handle has been placed on the peeler back-ward to conserve space in the box. Turn handle around by releasing the shaft lever and pulling shaft back slightly. Turn handle counter clockwise to unscrew from shaft and reattach by turning handle firmly clockwise.
2. Secure apple peeler to counter or table top by turning lever on vacuum base.
3. Turn the handle all the way in to make sure the fork passes directly through the centre of the coring slicing blade. if adjustment is needed, loosen thumb screw and centre blade around the fork.
4. Now you’re ready to begin peeling. Press apple, stem end first, firmly onto the 3 prong fork. Make sure apple is centred on fork so that peeler will work at its best. Turn handle to peel, core and slice in one easy operation.
5. When peeling is completed slide apple spiral from core. Release lever and pull handle back when peeling in completed to release core from fork.
6. The sharp end of the corer blade will make apple rings just for canning, drying, salads, pies and other delicious apple treats.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>