Electricity Consumption Meter Tracer Powersave Instructions
- June 8, 2024
- Tracer
Table of Contents
Electricity Consumption Meter Tracer Powersave
Introduction
Electricity consumption meter Tracer Power save
Power Meter is a monitoring and testing instrument which determines the power
consumption of a connected appliance and the cost of the electricity consumed.
Built-in 3.6V rechargeable Batteries(NI-MH). The purpose of the batteries is
to store the total electricity and memory setting
Resetting
If an abnormal display appears or the buttons produce no response, the instrument must be reset. To do this, press the RESET button.
Display Mode
Entire LCD can be displayed for about 1 minute and then it automatically gets into Model. To transfer from one mode to the other, press the FUNCTION button.
Mode 1: Time/Watt/Cost Display
Display duration (how long) this device connect to power source. LCD on first line shows 0:00 with first two figures mean minutes(2 figures will occur while occur at 10 min) and the rest shows seconds. After 60mins, it display 0:00 again with first two numbers means hour(2 figures will occur at 10 hours) and the rest shows minute. The rest can be done in the same manner which means after 24 hours, it will re-calculate. LCD on second line displays current power which ranges in 0.0W~9999W. LCD on third line displays the current electricity costs which ranges in 0.0cost~9999cost. It will keep on 0.00cost before setting rate without other figures.
Mode 2: Time/Cumulative electrical quantity Display
Display duration(how long) this device connect to power source. LCD on first line shows 0:00 with first two figures mean minutes(2 figures will occur while occur at 10min) and the rest shows seconds. After 60mins, it display 0:00 again with first two numbers means hour(2 figures will occur at 10hours) and the rest shows minutes. The rest can be done in the same manner which means after 24 hours, it will re-calculate. LCD on second line displays current cumulative electrical quantity which ranges in 0.00KWH~9999KWH without other figures. LCD on third line displays ”DAY”–”1” will be showed on numerical part(the other three figures will be showed at carry) which means it has cumulated electrical quantity for 24hours(one day). The rest can be done in the same manner until the maximal cumulative time of 9999 days.
Mode 3: Time/Voltage/Frequency Display
LCD on first line displays the same as Mode 1 dones. LCD on second line displays current voltage supply (v) which ranges in 0.0V~9999V. LCD on third line displays current frequency (HZ) which ranges in 0.0HZ~9999HZ without other figures.
Mode 4: Time/Current/Power Factor Display
LCD on first line displays the same as Mode 1 dones. LCD on second line displays load current which ranges in 0.0000A~9999A. LCD on third line displays current power factor which ranges in 0.00PF~1.00PF without other figures.
Mode 5: Time/Minimum Power Display
LCD on first line displays the same as Mode 1 dones. LCD on second line displays the minimum power which ranges in 0.0W~9999W. LCD on third line displays character of “Lo” without other figures.
Mode 6: Time/Maximal Power Display
LCD on first line displays the same as Mode 1 dones. LCD on second line displays the maximal power which ranges in 0.0W~9999W. LCD on third line displays character of “HI” without other figures.
Mode 7: Time/Price Display
LCD on first line displays the same as Mode 1 dones. LCD on third line displays the cost which ranges in 0.00COST/KWH~99.99COST/KWH without other figures.
Overload Display
When the power socket connects the load over 3680W, LCD on second line displays the “OVERLOAD” with booming noise to warn the users. (selectable choice)
Supplemental information
- Except “OVERLOAD” interface, LCD on first line display time in repetition within 24hours
- LCD on first line, second line or third line described in this instruction take section according to two black lines on LCD screen. Here it added for clarified purpose.
- Mode 7 will directly occur while press down button “cost”.
- “UP” & “Down” are in no function under un-setting mode.
Setting Mode
Electricity price setting
After keeping COST button pressed lasting more than 3 seconds(LCD on third line display system defaults price, eg 0.00COST/KWH), the rendered content begins moving up and down which means that the device has entered the setting mode. After that, press FUNCTION for switching, then press “UP” and “DWON” button again to set value which ranges in 0.00COST/KWH~99. 99COST/KWH. After setting all above, press COST to return to Mode 7 or it will automatically return to Mode 7 without any pressing after setting with data storage.
Technical Specification
- Operating voltage: 230V, 50HZ
- Operating current: max 16A
- Wide voltage range: 230V—-250V
- Timing display range: 0 second—-9999days
- Wattage display(watts) range: 0W—-3680W
- Voltage Display range: 0V—-9999V
- Current display (amps) range: 0.000A—-16.000A
- Frequency display range: 0Hz—-9999Hz
- Minimum Wattage display range: 0.0W—-9999W
- Maximum Wattage display range: 0.0W—-9999W
- Price display range: 0.00€/KWH—-99.99€/KWH
- Total KWH and cost display: 0.000KWH—-9999KWH, 0.00€—-9999€
The symbol of a crossed-out wheeled bin placed on electronic or electrical equipment, its packaging or accompanying documents means that the product may not be thrown out together with other waste. Used equipment may contain substances with toxic and carcinogenic properties, hazardous to human health and life, and poisoning the soil and groundwater. It is the user’s responsibility to hand over the used equipment to a designated collection point for its proper processing. For more information on recycling of electronic and electrical equipment, please contact your local authorities, waste disposal services and the place where you purchased this product. The household plays an important role in contributing to the reuse and recovery of secondary raw materials, including recycling, waste equipment. At this stage, attitudes are formed that affect the preservation of the common good, which is a clean natural environment.
