Letton PD R03 Waterproof Rechargeable Electric Dog Shock Collar Receiver User Guide
- June 17, 2024
- Letton
Table of Contents
- STATEMENT
- SAFETY INSTRUCTION
- BEFORE USING THE RECEIVER
- WHEN USING THE RECEIVE
- PACKAGE CONTENTS
- MAINTENANCE
- SPECIFICATIONS
- INTRODUCTION FOR THE BUTTONS
- OPERATION AND CHARGING
- HOE TO WEAR RECIVER COLLAR CORRECTLY
- PAIRING AND TESTING
- REFARENCE SIZE FOR DIFFERENT DOGS
- WARRANTY
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Letton PD R03 Waterproof Rechargeable Electric Dog Shock Collar Receiver
STATEMENT
Thank you for purchasing the dog training collar receiver PD R03, this product has been tested to meet your stringent quality standards, and also covered with warranty for 12 months from the date of its original purchase.
Please contact us with your order ID and problem or issue, we will respond within 24 hours.
The operating frequency of remote transmitter must be 433MHz, same as receiver. Otherwise, the receiver will not work properly.
SAFETY INSTRUCTION
Training collars are used to train the dogs and not for punishment. Use properly with care and the collar can be a safe and effective tool to train.
Building communication and strengthen your bond with your best friend.
Obey all safety messages that follow this instruction to avoid possible injury.
If your dog has heart disease, high blood pressure, cerebral thrombosis, skin allergies, etc., please do not use it.
BEFORE USING THE RECEIVER
-
Do not expose to extreme heat or store at the temperatures above 113°F or 45°C.
-
Please always keep the receiver out of reach of children.
-
Charge the receiver at least 2 hours when receive it. The receiver can’t get any signals while it is being charged.
WHEN USING THE RECEIVE
- Avoid leaving the receiver on the dog for more than 18 hours per day.
- If possible, please reposition the receiver on the dog’s neck every 1 to 2 hours.
- Check the fit to prevent excessive pressure.
- The charging rubber cap must be closely covered when your dog is swimming or the receiver will get broken when getting into water from the interface. Taking off the receiver is recommended.
- The receiver will turn off automatically after 10 seconds “beep” sound when battery is low.
PACKAGE CONTENTS
1 x Collar Strap | 1 x Receiver |
---|---|
1 x Test Lamp | 2 x Long Contact Points |
2 x Long Conductive Silicone Caps | 2 x Short Contact Points |
2 x Short Conductive Silicone Caps | 1 x User Manual |
MAINTENANCE
- Please examine regularly to ensure tightness of the receiver and eliminate any external damages.
- Clean the screw caps with alcohol weekly.
- Examine your dog’s neck and clean up weekly.
- The battery is rechargeable. In order to maintain battery life, please charge it every 2 months if it is not often used.
SPECIFICATIONS
Model | PDR03 |
---|---|
Function | Training Dogs |
Working Modes | Tone, Vibration, Static Shock |
Operating Frequency | 433MHz |
Net Weight | 56g |
Battery Capacity | 650mAh |
Working Time | 25-40 days |
Waterproof Level | IPX7 |
INTRODUCTION FOR THE BUTTONS
- Contact Points: Choose a suitable length to fit for different thickness of dog’s hair.
- Indicator Light Of The Receiver
- Power Button Of The Receiver
OPERATION AND CHARGING
How to choose USB charger
Please choose the USB charger with the parameters below (we can charge the
device by the charger of smart phone or laptop/computer USB interface, before
that please check if the charger is with the following parameters}:
Input: 100-240V N 50-60Hz
Output: 5V 1000mA (or 300mA/500mA}
Charge the receiver
- Remove the rubber cover, connect the receiver to a charger into a standard socket.
- The red indicator will flash slowly when the receiver is charging, and the green indicator will stay on after it is fully charged.
Turn the receiver on and off
- Turn On: Press the power button once, the receiver will make a short “beep” sound, means that the receiver is turned on.
- Turn Off: Press the power button once, the receiver will make a long “beep” sound and the indicator light is not flash any more.
Check the receiver power
When the receiver is turned on, press the power button twice quickly to check the power:
Receiver beeps 5 times, representing 100% (80-100%)
Receiver beeps 4 times, representing 80% ( 60-80%)
Receiver beeps 3 times, representing 60% ( 40-60%)
Receiver beeps 2 times, representing 40% (20-40%)
Receiver beeps 1 time, representing 20% (1-20%)
HOE TO WEAR RECIVER COLLAR CORRECTLY
Correct wearing position helps healthy and effective dog training.
- The receiver shall be placed at the bottom of dog’s neck, and the screw caps must contact the dog’s skin directly.
- If your dog has thick hair, please use longer screw caps.
- The space between receiver collar and the dog’s neck shall be maintained to a finger distance, which can’t be too loose, otherwise static shock effectiveness shall be badly influenced.
- The extra part of the strap can be trimmed, or be handled with other methods.
PAIRING AND TESTING
Note: The operating frequency of remote transmitter must be 433 MHz. same as receiver. Otherwise, the receiver will not work properly.
- 1. Turn on the remote transmitter, press the channel button to choose a signal channel you want to use.
- Hold power button on the receiver for 2 seconds, when the indicator light keeps flashing, press one of the function button like tone, vibration or static shock on remote transmitter to pair.
- If you do not press the function button within 10 seconds, please pair them again.
- If you have multiple receivers, you can choose the same signal channel or choose different channel for pairing.
Test the dog training collar
Static shock function test
Static shock function can not be seen with the naked eye, please use our test lamp. Press the static shock function button, the test lamp will blink.
Vibration function test
Press the vibration function button, the receiver will vibrate.
Tone function test
Press the tone button, the receiver will emit a tone.
- You need to pair the remote transmitter and receiver before using it on the dog. Please follow the manual for the first time use.
- Please remember the channel you choose and do not change to other one, or the receiver will not receive signals.
REFARENCE SIZE FOR DIFFERENT DOGS
Reference weight for dogs
Large Dog (Body height above 24 inch, Weight above 88 lbs}
Medium Dog (Height 16-24 inch, Weight 24.2-66 lbs}
Small Dog (Height 10-16 inch, Weight 8.8-22 lbs}
Mini Dog (Height under 10 inch, Weight under 8.8 lbs}
Size (Dog)| Neck (In)| Chest Measurement
(In)| Back
Length (In)| Type
---|---|---|---|---
Mini| 7.8- 8.6| 9.8-11.8| 17.5| Chihuahua, Yorkshire Terrier
Small| 7.8- 9.5| 11.4-14.2| 9| Chihuahua, Yorkshire Terrier,
Poodle, Pomeranian
Medium| 9 . 0-11.0| 13.7-16.5| 11| Maltese Dog, Shih Tzu
Large| 9.6-12.2| 16. 2-18.5| 12.2| Miniature Schnauzer,
Pekingese
Large| 11.8-13 .4| 18.1- 20.8| 13.8| Schnauzer, English
Cocker Spaniel
Large| 13.0- 14.5| 20.5-23.2| 15.7| Beagle
Huge| 17.0-18.9| 30.0-33.0| 23.6| Husky
WARRANTY
This product is covered with warranty for 12 months from the date of its original purchase.
Any defective part will be repaired or replaced at no charge if the appliance has not been tampered with and has been used according to these printed directions.
If any problems occur, please contact the local dealer immediately to launch a warranty claim. Our consumer service representative will respond within 1 business day, advise you how to correct the problem yourself or instruct you on how to return the defective unit back to us for repair or replacement.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>